User Manual

POC-17i/19i Series
Page 39
Figure 3-19: USB Device Connection
Step 3: Insert the device connector. Once aligned, gently insert the USB device
connector into the onboard connector.
3.8.4 VGA Monitor Connection
The POC-17i/19i Series has a single female DB-15 connector on the external peripheral
interface panel. The DB-15 connector is connected to a CRT or VGA monitor. To connect
a monitor to the POC-17i/19i Series, please follow the instructions below.
Step 1: Locate the female DB-15 connector. The location of the female DB-15 connector
is shown in Section
1.3.4.
Step 2: Align the VGA connector. Align the male DB-15 connector on the VGA screen
cable with the female DB-15 connector on the external peripheral interface.
Step 3: Insert the VGA connector. Once the connectors are properly aligned with the
insert the male connector from the VGA screen into the female connector on the
POC-17i/19i Series. See
Figure 3-20.