User Manual

POC-17i/19i Series
Page 28
Figure 3-8: COM3 RX Function Select Jumper Location
3.6.8 ME Debug Mode Jumper
Jumper Label:
JP12
Jumper Type:
2-pin header
Jumper Settings:
See
Table 3-11
Jumper Location:
See
Figure 3-9
The ME Debug Mode jumper allows ME firmware overwrite protection. The ME Debug
Mode jumper settings are shown in
Table 3-11.
ME Debug Mode Description
Open Disabled
Closed Enabled
Table 3-11: ME Debug Mode Jumper Settings
The ME Debug Mode jumper location is shown in Figure 3-9.