User Manual

POC-17i/19i Series
Page 20
Description Label Type
Clear CMOS setting J_CMOS1 3-pin header
COM1 Pin 9 setting JP7, JP8 6-pin header
COM3 TX function select JP9 6-pin header
COM3 RS-232/422/485 JP10 12-pin header
COM3 RS function select JP11 8-pin header
ME Debug Mode JP12 2-pin header
iTPM setting J_ITPM1 3-pin header
ME RTC select ME_RTC1 3-pin header
SPI setting J_SPI1 3-pin header
Table 3-1: Jumpers
3.6.1 Access the Jumpers
To access the jumpers, please remove the back panel and the internal aluminum chassis
(see Section
3.4 and Section 3.5).
3.6.2 Preconfigured Jumpers
WARNING:
Do not change the settings on the jumpers in described here. Doing so
may disable or damage the system.
The following jumpers are preconfigured for the POC-17i/19i Series. Users should not
change these jumpers (
Table 3-2).
Jumper Name Label Type
MCU Detect LCD Type JP3 4-pin header