User Manual

ManualsBrandsIEI Integration ManualsComputersPOC-17i_19i-Series_IEI

POC-17i/19i Series

Page i

User Manual

MODEL:

POC-17i/19i Series

Medical Panel PC with Intel® Core™ i7/i5/i3 Processor,

TFT LCD, Wireless LAN, Touch Screen,

RS-232/422/485 and RoHS

Rev. 1.00 – 7 August, 2013

Summary of content (128 pages)

PAGE 1
POC-17i/19i Series MODEL: POC-17i/19i Series Medical Panel PC with Intel® Core™ i7/i5/i3 Processor, TFT LCD, Wireless LAN, Touch Screen, RS-232/422/485 and RoHS User Manual Page i Rev. 1.
PAGE 2
POC-17i/19i Series Revision Date Version Changes 7 August, 2013 1.
PAGE 3
POC-17i/19i Series Copyright COPYRIGHT NOTICE The information in this document is subject to change without prior notice in order to improve reliability, design and function and does not represent a commitment on the part of the manufacturer. In no event will the manufacturer be liable for direct, indirect, special, incidental, or consequential damages arising out of the use or inability to use the product or documentation, even if advised of the possibility of such damages.
PAGE 4
POC-17i/19i Series Contact Information Headquarters IEI Integration Corp. No. 29, Zongxing Rd., Xizhi Dist., Address: New Taipei City 221, Taiwan +886-2-8691-6798 Phone: +886-2-6616-0028 Fax: www.ieiworld.com Web Site: Sales Email: sales@ieiworld.com.tw USA IEI Integration USA Corp. 138 University Parkway, Address: Pomona, CA 91768 +1-909-595-2819 Phone: +1-909-595-2816 Fax: www.ieiworld.com Web Site: Sales Email: sales@usa.ieiworld.com.
PAGE 5
POC-17i/19i Series Table of Contents 1 INTRODUCTION.......................................................................................................... 1 1.1 OVERVIEW.................................................................................................................. 2 1.2 FEATURES ................................................................................................................... 3 1.3 EXTERNAL OVERVIEW .....................................................................
PAGE 6
POC-17i/19i Series 3.6.6.1 COM3 RS-422 and RS-485 Pinouts ......................................................... 26 3.6.7 COM3 RS Function Select Jumper .................................................................. 27 3.6.8 ME Debug Mode Jumper ................................................................................. 28 3.6.9 iTPM Setting Jumper ....................................................................................... 29 3.6.10 ME RTC Select Jumper..............................
PAGE 7
POC-17i/19i Series 5.3.1 ACPI Settings ................................................................................................... 54 5.3.2 Trusted Computing ........................................................................................... 55 5.3.3 CPU Configuration.......................................................................................... 56 5.3.4 SATA Configuration ......................................................................................... 57 5.3.
PAGE 8
POC-17i/19i Series A.2 MAINTENANCE AND CLEANING PRECAUTIONS ...................................................... 104 A.2.1 Maintenance and Cleaning............................................................................ 104 A.2.2 Cleaning Tools ............................................................................................... 105 A.3 FCC PRECAUTIONS ............................................................................................... 105 B BIOS OPTIONS ..........................
PAGE 9
POC-17i/19i Series List of Figures Figure 1-1: POC-17i/19i Series Medical Panel PC .......................................................................2 Figure 1-2: Front View ....................................................................................................................4 Figure 1-3: Rear View .....................................................................................................................4 Figure 1-4: I/O Interface Connector Panel................................
PAGE 10
POC-17i/19i Series Figure 4-3: DDR SO-DIMM Module Installation..........................................................................46 Figure 4-4: HDD Cover Screw......................................................................................................47 Figure 4-5: HDD Bracket Retention Screw .................................................................................47 Figure 4-6: HDD Removal .............................................................................................
PAGE 11
POC-17i/19i Series List of Tables Table 1-1: System Specifications..................................................................................................8 Table 3-1: Jumpers .......................................................................................................................20 Table 3-2: Preconfigured Jumpers .............................................................................................21 Table 3-3: Clear CMOS Jumper Settings......................................
PAGE 12
POC-17i/19i Series BIOS Menus BIOS Menu 1: Main .......................................................................................................................52 BIOS Menu 2: Advanced ..............................................................................................................54 BIOS Menu 3: ACPI Configuration ..............................................................................................54 BIOS Menu 4: TPM Configuration ..............................................
PAGE 13
POC-17i/19i Series Chapter 1 1 Introduction Page 1
PAGE 14
POC-17i/19i Series 1.1 Overview Figure 1-1: POC-17i/19i Series Medical Panel PC The POC-17i/19i Series is an Intel® Core™ powered flat panel PC with a rich variety of functions and peripherals. All POC-17i/19i Series models are designed for easy and simplified integration into point-of-care (POC) applications. An Intel® Core™ i7/i5/i3 processor coupled with the Intel® HM55 chipset delivers optimal memory, graphics, and peripheral I/O support. The system comes with 2.
PAGE 15
POC-17i/19i Series Intended use: The POC-17i/19i Series is intended to serve as a medical computing device for integration with hospital system. It is designed for general purpose for hospital environment. For data collection and display for reference. It shall not be used for life-supporting system. 1.2 Features The POC-17i/19i Series features the following: Intel® Core™ i7/i5/i3 processor Intel® HM55 chipset 2.0 GB DDR3 SO-DIMM preinstalled 802.11 a/b/g/n wireless module Four USB 2.
PAGE 16
POC-17i/19i Series Figure 1-2: Front View 1.3.3 Rear Panel The rear panel provides access to retention screw holes that support the wall mounting. Refer to Figure 1-3.
PAGE 17
POC-17i/19i Series 1.3.4 I/O Interface Panel The I/O interface panel located on the bottom of the POC-17i/19i Series has the following I/O interface connectors: 1 x Power switch 1 x 12 V DC In connector 1 x RS-232 connector 1 x RS-232/422/485 connector 2 x RJ-45 for Giga LAN connectors 1 x AT/ATX power mode switch 4 x USB 2.
PAGE 18
POC-17i/19i Series 1.3.5 OSD Control Buttons The POC-17i/19i Series has seven OSD control buttons as shown below. Figure 1-5: OSD Control Buttons 1.4 Internal Overview The POC-17i/19i Series has the following components installed internally: Page 6 1 x Mainboard 1 x 2.
PAGE 19
POC-17i/19i Series 1.5 System Specifications The technical specifications for the POC-17i/19i Series systems are listed in Table 1-1. Specification POC-17i POC-19i LCD Size 17” 19” Max. Resolution 1280 x 1024 1280 x 1024 Brightness (cd/m2) 350 350 LCD Color 16.7 M 16.7 M Viewing Angle (H-V) 170。/ 160。 170。/ 160。 CPU Intel® Celeron® P4500 1.86G CPU Intel® Core™ i3-330M 2.26G CPU Intel® Core™ i5-520M 2.4G CPU Intel® Core™ i7-620M 2.
PAGE 20
POC-17i/19i Series Specification POC-17i Safety ANSI/AAMI ES60601-1 POC-19i CAN/CSA C22.2 No. 60601-1 IEC/EN 60601-1 3rd edition Touch Screen Resistive Type 5-wire (touch controller is on board) Power Adapter Manufacturer: FSP Group Inc. (Medical Grade) Model: PMP120-12-S Input: 100 V ~ 240 V, 47 Hz ~ 63 Hz, 1.4 A ~ 0.
PAGE 21
POC-17i/19i Series 1.6 Dimensions The POC-17i Series dimensions are shown in Figure 1-6 and listed below. Width: 428 mm Height: 250.
PAGE 22
POC-17i/19i Series The POC-19i Series dimensions are shown in Figure 1-7 and listed below. Width: 469.9 mm Height: 382.
PAGE 23
POC-17i/19i Series Chapter 2 2 Unpacking Page 11
PAGE 24
POC-17i/19i Series WARNING: The labels on the external box are best to be read at a distance of 30 cm due to the small label size. 2.1 Unpacking To unpack the flat panel PC, follow the steps below: WARNING! The front side LCD screen has a protective plastic cover stuck to the screen. Only remove the plastic cover after the flat panel PC has been properly installed. This ensures the screen is protected during the installation process.
PAGE 25
POC-17i/19i Series 2.2 Packing List The POC-17i/19i Series flat panel PC is shipped with the following components: NOTE: If any of these items are missing or damaged, contact the distributor or sales representative immediately.
PAGE 26
POC-17i/19i Series Page 14 1 Touch pen 1 User manual CD and driver CD
PAGE 27
POC-17i/19i Series Chapter 3 3 Installation Page 15
PAGE 28
POC-17i/19i Series 3.1 Anti-static Precautions WARNING: Failure to take ESD precautions during the maintenance of the device may result in permanent damage to the device and severe injury to the user. Electrostatic discharge (ESD) can cause serious damage to electronic components, including the POC-17i/19i Series. Dry climates are especially susceptible to ESD.
PAGE 29
POC-17i/19i Series Anti-static Discharge: If a user open the rear panel of the flat panel PC, to configure the jumpers or plug in added peripheral devices, ground themselves first and wear and anti-static wristband. 3.3 Installation and Configuration Steps The following installation steps must be followed.
PAGE 30
POC-17i/19i Series Figure 3-1: Back Cover Retention Screws Step 2: Lift the cover off the POC-17i/19i Series panel PC. 3.5 Removing the Internal Aluminum Cover WARNING: Over-tightening rear cover screws will crack the plastic frame. Maximum torque for cover screws is 5 kg-cm (0.36 lb-ft/0.49 Nm). To remove the internal aluminum cover, follow the steps below. Step 1: Remove retention screws securing the internal aluminum cover.
PAGE 31
POC-17i/19i Series Figure 3-2: Aluminum Back Cover Retention Screws Step 3: Lift the aluminum cover away to expose the mainboard jumpers. 3.6 Jumper Settings NOTE: A jumper is a metal bridge used to close an electrical circuit. It consists of two or three metal pins and a small metal clip (often protected by a plastic cover) that slides over the pins to connect them.
PAGE 32
POC-17i/19i Series Description Label Type Clear CMOS setting J_CMOS1 3-pin header COM1 Pin 9 setting JP7, JP8 6-pin header COM3 TX function select JP9 6-pin header COM3 RS-232/422/485 JP10 12-pin header COM3 RS function select JP11 8-pin header ME Debug Mode JP12 2-pin header iTPM setting J_ITPM1 3-pin header ME RTC select ME_RTC1 3-pin header SPI setting J_SPI1 3-pin header Table 3-1: Jumpers 3.6.
PAGE 33
POC-17i/19i Series MCU PWM Power JP4 3-pin header LCD Power Select J_VLVDS1 6-pin header Table 3-2: Preconfigured Jumpers 3.6.3 Clear CMOS Jumper Jumper Label: J_CMOS1 Jumper Type: 3-pin header Jumper Settings: See Table 3-3 Jumper Location: See Figure 3-3 If the POC-17i/19i Series fails to boot due to improper BIOS settings, the clear CMOS jumper clears the CMOS data and resets the system BIOS information.
PAGE 34
POC-17i/19i Series Figure 3-3: Clear CMOS Jumper 3.6.4 COM1 Pin 9 Setting Jumper Label: JP7 and JP8 Jumper Type: 6-pin header Jumper Settings: See Table 3-4 and Table 3-5 Jumper Location: See Figure 3-4 and Figure 3-5 Two jumpers (JP7 and JP8) configure pin 9 on COM1 and COM3 DB-9 connectors. Pin 9 on the COM1 and the COM3 DB-9 connectors can be set as the ring (RI) signal, +5 V or +12 V. The COM1 and COM3 Pin 9 Setting jumper selection options are shown in the tables below.
PAGE 35
POC-17i/19i Series The JP7 jumper location is shown below. Figure 3-4: JP7 Jumper Setting Location JP8 Description Short 1-2 COM3 RI +12 V Short 3-4 COM3 RI Normal Short 5-6 COM3 RI +5 V Table 3-5: COM3 Pin 9 Setting Jumper Settings The JP8 jumper location is shown below.
PAGE 36
POC-17i/19i Series Figure 3-5: JP8 Jumper Setting Location 3.6.5 COM3 TX Function Select Jumper Jumper Label: JP9 Jumper Type: 6-pin header Jumper Settings: See Table 3-6 Jumper Location: See Figure 3-6 The COM3 TX Function Select jumper configures the TX pin on COM3 serial port connector as RS-422 or RS-485. The COM3 TX Function Select jumper selection options are shown in Table 3-6.
PAGE 37
POC-17i/19i Series Figure 3-6: COM3 TX Function Select Jumper Location 3.6.6 COM3 RS-232/422/485 Jumper Jumper Label: JP10 Jumper Type: 12-pin header (four 3-pin headers combined) Jumper Settings: See Table 3-7 Jumper Location: See Figure 3-7 The COM3 RS-232/422/485 Serial Port Select jumper sets the communication protocol used by the second serial communications port (COM3) as RS-232, RS-422 or RS-485. The COM3 RS-232/422/485 Serial Port Select settings are shown in Table 3-7.
PAGE 38
POC-17i/19i Series Short 5-6 RS-422/485 Short 8-9 RS-422/485 Short 11-12 RS-422/485 Table 3-7: COM3 RS-232/422/485 Serial Port Select Jumper Settings The COM3 RS-232/422/485 Serial Port Select jumper location is shown in Figure 3-7. Figure 3-7: COM3 RS-232/422/485 Serial Port Select Jumper Location 3.6.6.1 COM3 RS-422 and RS-485 Pinouts The pinouts for RS-422 and RS-485 operation of external serial port COM 3 are detailed below.
PAGE 39
POC-17i/19i Series COM 3 RS-485 Description Pin 1 Data- Pin 2 Data+ Table 3-9: RS-485 Pinouts 3.6.7 COM3 RS Function Select Jumper Jumper Label: JP11 Jumper Type: 8-pin header Jumper Settings: See Table 3-10 Jumper Location: See Figure 3-8 The COM3 RX Function Select jumper sets the communication protocol used by the RX serial communications port COM3 as RS-232, RS-422 or RS-485. The COM3 RX Function Select jumper settings are shown in Table 3-10.
PAGE 40
POC-17i/19i Series Figure 3-8: COM3 RX Function Select Jumper Location 3.6.8 ME Debug Mode Jumper Jumper Label: JP12 Jumper Type: 2-pin header Jumper Settings: See Table 3-11 Jumper Location: See Figure 3-9 The ME Debug Mode jumper allows ME firmware overwrite protection. The ME Debug Mode jumper settings are shown in Table 3-11. ME Debug Mode Description Open Disabled Closed Enabled Table 3-11: ME Debug Mode Jumper Settings The ME Debug Mode jumper location is shown in Figure 3-9.
PAGE 41
POC-17i/19i Series Figure 3-9: ME Debug Mode Jumper Location 3.6.9 iTPM Setting Jumper Jumper Label: J_ITPM1 Jumper Type: 3-pin header Jumper Settings: See Table 3-12 Jumper Location: See Figure 3-10 The iTPM jumper settings are shown in Table 3-12. iTPM setting Description Short 1-2 Disable iTPM Short 2-3 Enable iTPM Table 3-12: iTPM Jumper Settings The iTPM jumper location is shown in Figure 3-10.
PAGE 42
POC-17i/19i Series Figure 3-10: iTPM Jumper Location 3.6.10 ME RTC Select Jumper Jumper Label: ME_RTC1 Jumper Type: 3-pin header Jumper Settings: See Table 3-13 Jumper Location: See Figure 3-11 The ME RTC select jumper settings are shown in Table 3-13. ME RTC select Description Short 1-2 Keep ME RTC Short 2-3 Clear ME RTC Table 3-13: ME RTC Jumper Settings The ME RTC jumper location is shown in Figure 3-11.
PAGE 43
POC-17i/19i Series Figure 3-11: ME RTC Jumper Location 3.6.11 SPI Setting Jumper Jumper Label: J_SPI Jumper Type: 3-pin header Jumper Settings: See Table 3-14 Jumper Location: See Figure 3-12 The SPI jumper settings are shown in Table 3-14. SPI setting Description Short 1-2 Program SP10 Short 2-3 Program SPI1 Table 3-14: SPI Jumper Settings The SPI jumper location is shown in Figure 3-12.
PAGE 44
POC-17i/19i Series Figure 3-12: SPI Jumper Location 3.7 Mounting the System WARNING! When mounting the flat panel PC onto an arm, onto the wall or onto a panel, it is better to have more than one person to help with the installation to make sure the panel PC does not fall down and get damaged. The methods of mounting the POC-17i/19i Series are listed below. Wall mounting Arm mounting The mounting methods are described below. 3.7.
PAGE 45
POC-17i/19i Series Step 3: Drill four pilot holes at the marked locations on the wall for the bracket retention screws. Step 4: Align the wall-mounting bracket screw holes with the pilot holes. Step 5: Secure the mounting-bracket to the wall by inserting the retention screws into the four pilot holes and tightening them (Figure 3-13).
PAGE 46
POC-17i/19i Series NOTE: In the diagram below the bracket is already installed on the wall. Figure 3-14: Chassis Support Screws Step 9: Secure the panel PC by fastening the retention screw of the wall-mounting bracket. (Figure 3-15).
PAGE 47
POC-17i/19i Series Figure 3-15: Securing the Panel PC 3.7.2 Arm Mounting The POC-17i/19i Series is VESA (Video Electronics Standards Association) compliant and can be mounted on an arm with a 75mm or 100mm interface pad. To mount the POC-17i/19i Series on an arm, please follow the steps below. Step 1: The arm is a separately purchased item. Please correctly mount the arm onto the surface it uses as a base. To do this, refer to the installation documentation that came with the mounting arm.
PAGE 48
POC-17i/19i Series NOTE: When purchasing the arm please ensure that it is VESA compliant and that the arm has a 100 mm interface pad. If the mounting arm is not VESA compliant it cannot be used to support the POC-17i/19i Series flat panel PC. Step 2: Once the mounting arm has been firmly attached to the surface, lift the flat panel PC onto the interface pad of the mounting arm. Step 3: Align the retention screw holes on the mounting arm interface with those in the flat panel PC.
PAGE 49
POC-17i/19i Series Step 1: Locate the RJ-45 connectors on the bottom panel of the POC-17i/19i Series. Step 2: Align the connectors. Align the RJ-45 connector on the LAN cable with one of the RJ-45 connectors on the bottom panel of the POC-17i/19i Series. See Figure 3-17. Figure 3-17: LAN Connection Step 3: Insert the LAN cable RJ-45 connector. Once aligned, gently insert the LAN cable RJ-45 connector into the onboard RJ-45 connector. 3.8.
PAGE 50
POC-17i/19i Series Figure 3-18: Serial Device Connector Step 3: Secure the connector. Secure the serial device connector to the external interface by tightening the two retention screws on either side of the connector. 3.8.3 USB Device Connection There are four external USB 2.0 connectors. All connectors are perpendicular to the POC-17i/19i Series. To connect a USB 2.0 or USB 1.1 device, please follow the instructions below. Step 1: Located the USB connectors.
PAGE 51
POC-17i/19i Series Figure 3-19: USB Device Connection Step 3: Insert the device connector. Once aligned, gently insert the USB device connector into the onboard connector. 3.8.4 VGA Monitor Connection The POC-17i/19i Series has a single female DB-15 connector on the external peripheral interface panel. The DB-15 connector is connected to a CRT or VGA monitor. To connect a monitor to the POC-17i/19i Series, please follow the instructions below. Step 1: Locate the female DB-15 connector.
PAGE 52
POC-17i/19i Series Figure 3-20: VGA Connector Step 4: Secure the connector. Secure the DB-15 VGA connector from the VGA monitor to the external interface by tightening the two retention screws on either side of the connector. Step 0: 3.9 AT/ATX Mode Selection AT and ATX power modes can both be used on the POC-17i/19i Series. The selection is made through an AT/ATX switch on bottom panel (Figure 3-21). To select AT mode or ATX mode, follow the steps below.
PAGE 53
POC-17i/19i Series 3.9.1 AT Power Mode With the AT mode selected, the power is controlled by a central power unit rather than a power switch. The POC-17i/19i Series panel PC turns on automatically when the power is connected. The AT mode benefits a production line to control multiple panel PCs from a central management center and other applications including: ATM Self-service kiosk Plant environment monitoring system Factory automation platform Manufacturing shop flow 3.9.
PAGE 54
POC-17i/19i Series Chapter 4 4 System Maintenance Page 42
PAGE 55
POC-17i/19i Series 4.1 System Maintenance Introduction If the components of the POC-17i/19i Series fail they must be replaced. Components that can be replaced include: SO-DIMM module HDD drive Please contact the system reseller or vendor to purchase replacement parts. 4.2 Anti-static Precautions WARNING: Failure to take ESD precautions during the maintenance of the POC-17i/19i Series may result in permanent damage to the POC-17i/19i Series and severe injury to the user.
PAGE 56
POC-17i/19i Series 4.3 Turn off the Power WARNING: Failing to turn off the system before opening it can cause permanent damage to the system and serious or fatal injury to the user. Before any maintenance procedures are carried out on the system, make sure the system is turned off. 4.4 Replacing Components 4.4.1 Memory Module Replacement The flat panel PC features two DDR3 dual-channel SO-DIMM sockets supporting a system max of 8GB.
PAGE 57
POC-17i/19i Series Figureٛ 4-1: HDD Bracket Screws Step 4: Lift the HDD bracket away to expose the DIMM connectors. See (Figure 4-2). Figure 4-2: SO-DIMM Socket Location Step 5: Remove the DDR memory module by pulling both the spring retainer clips outward from the socket.
PAGE 58
POC-17i/19i Series Step 6: Grasp the DDR memory module by the edges and carefully pull it out of the socket. Step 7: Install the new DDR memory module by pushing it into the socket at an angle (Figure 4-3). Step 8: Gently pull the spring retainer clips of the SO-DIMM socket out and push the rear of the DDR memory module down (Figure 4-3). Step 9: Release the spring retainer clips on the SO-DIMM socket. They clip into place and secure the DDR memory module in the socket.
PAGE 59
POC-17i/19i Series Figure 4-4: HDD Cover Screw Step 4: Remove the HDD bracket retention screw (Figure 4-4). Figure 4-5: HDD Bracket Retention Screw Step 5: Pull the old HDD from the HDD slot.
PAGE 60
POC-17i/19i Series Figure 4-6: HDD Removal Step 6: Line up the new HDD with the SATA connector. Step 7: Insert the HDD into SATA connector until it is securely in place. Step 8: Secure the HDD bracket with the previously removed retention screw. Step 9: Replace the HDD cover and secure using one (1) retention screw.
PAGE 61
POC-17i/19i Series Chapter 5 5 BIOS Setup Page 49
PAGE 62
POC-17i/19i Series 5.1 Introduction A licensed copy of the BIOS is preprogrammed into the ROM BIOS. The BIOS setup program allows users to modify the basic system configuration. This chapter describes how to access the BIOS setup program and the configuration options that may be changed. 5.1.1 Starting Setup The UEFI BIOS is activated when the computer is turned on. The setup program can be activated in one of two ways. 1. Press the DELETE or F2 key as soon as the system is turned on or 2.
PAGE 63
POC-17i/19i Series Esc key Main Menu – Quit and do not save changes into CMOS Status Page Setup Menu and Option Page Setup Menu -Exit current page and return to Main Menu F1 key General help, only for Status Page Setup Menu and Option Page Setup Menu F9 key Load optimized defaults F10 key Save changes and Exit BIOS Table 5-1: BIOS Navigation Keys 5.1.
PAGE 64
POC-17i/19i Series 5.2 Main The Main BIOS menu (BIOS Menu 1) appears when the BIOS Setup program is entered. 5 The Main menu gives an overview of the basic system information. Aptio Setup Utility – Copyright (C) 2010 American Megatrends, Inc. Main Advanced Chipset Boot Security Save & Exit BIOS Information BIOS Vendor Core Version Project Version Build Date American Megatrends 4.6.3.7 0.16 H691AR10.ROM 10/12/2010 15:39:09 Set the Date. Use Tab to switch between Date elements.
PAGE 65
POC-17i/19i Series The System Overview field also has two user configurable fields: Î System Date [xx/xx/xx] Use the System Date option to set the system date. Manually enter the day, month and year. Î System Time [xx:xx:xx] Use the System Time option to set the system time. Manually enter the hours, minutes and seconds. 5.
PAGE 66
POC-17i/19i Series Aptio Setup Utility – Copyright (C) 2010 American Megatrends, Inc. Main Advanced Chipset Boot Security Save & Exit > > > > > > > > ACPI Settings Trusted Computing CPU Configuration SATA Configuration USB Configuration Super IO Configuration H/M Monitor Serial Port Console Redirection System ACPI Parameters ---------------------- ÅÆ: Select Screen ↑ ↓: Select Item Enter Select +/-: Change Opt.
PAGE 67
POC-17i/19i Series Î ACPI Sleep State [S3 (CPU Stop Clock)] Use the ACPI Sleep State option to specify the sleep state the system enters when it is not being used. Î S1 (CPU Stop DEFAULT The system enters S1 (POS) sleep state. The system appears off. The CPU is stopped; RAM is Clock) refreshed; the system is running in a low power mode. Î S3 (Suspend The caches are flushed and the CPU is powered to off. Power to the RAM is maintained.
PAGE 68
POC-17i/19i Series Î TPM Support [Disable] Use the TPM Support option to configure support for the TPM. Î Disable DEFAULT TPM support is disabled. Î Enable TPM support is enabled. 5.3.3 CPU Configuration Use the CPU Configuration menu (BIOS Menu 5) to view detailed CPU specifications and configure the CPU. Aptio Setup Utility – Copyright (C) 2010 American Megatrends, Inc.
PAGE 69
POC-17i/19i Series 5.3.4 SATA Configuration Use the SATA Configuration menu (BIOS Menu 6) to change and/or set the configuration of the SATA devices installed in the system. Aptio Setup Utility – Copyright (C) 2010 American Megatrends, Inc. Advanced SATA Configuration (1) IDE Mode. (2) AHCI Mode. SATA Port0 SATA Port1 SATA Port2 Not Present Not Present Not Present --------------------- ÅÆ: Select Screen ↑ ↓: Select Item Enter Select +/-: Change Opt.
PAGE 70
POC-17i/19i Series Î Compatible DEFAULT Configures the on-board SATA controller to be in compatible mode. In this mode, a SATA channel will replace one of the IDE channels. This mode supports up to 6 storage devices. 5.3.5 USB Configuration Use the USB Configuration menu (BIOS Menu 7) to read USB configuration information and configure the USB settings. Aptio Setup Utility – Copyright (C) 2010 American Megatrends, Inc.
PAGE 71
POC-17i/19i Series Î Legacy USB Support [Enabled] Use the Legacy USB Support BIOS option to enable USB mouse and USB keyboard support. Normally if this option is not enabled, any attached USB mouse or USB keyboard does not become available until a USB compatible operating system is fully booted with all USB drivers loaded. When this option is enabled, any attached USB mouse or USB keyboard can control the system even when there is no USB driver loaded onto the system.
PAGE 72
POC-17i/19i Series 5.3.6.1 Serial Port n Configuration Use the Serial Port n Configuration menu (BIOS Menu 9) to configure the serial port n. Aptio Setup Utility – Copyright (C) 2010 American Megatrends, Inc. Advanced Serial Port 0 Configuration Serial Port Device Settings Enable or Disable Serial Port (COM) [Enabled] IO=3F8h; IRQ=4 --------------------ÅÆ: Select Screen ↑ ↓: Select Item Enter Select +/-: Change Opt.
PAGE 73
POC-17i/19i Series Î Î Î Î IO=3F8h; Serial Port I/O port address is 3F8h and the interrupt IRQ=3, 4 address is IRQ3, 4 IO=2F8h; Serial Port I/O port address is 2F8h and the interrupt IRQ=3, 4 address is IRQ3, 4 IO=2C0h; Serial Port I/O port address is 2C0h and the interrupt IRQ=3, 4 address is IRQ3, 4 IO=2C8h; Serial Port I/O port address is 2C8h and the interrupt IRQ=3, 4 address is IRQ3, 4 5.3.6.1.
PAGE 74
POC-17i/19i Series Î IO=2C8h; Serial Port I/O port address is 2C8h and the interrupt IRQ=3, 4 address is IRQ3, 4 5.3.6.1.3 Serial Port 2 Configuration Î Serial Port [Enabled] Use the Serial Port option to enable or disable the serial port. Î Î Disabled Î Enabled Disable the serial port DEFAULT Enable the serial port Change Settings [Auto] Use the Change Settings option to change the serial port IO port address and interrupt address.
PAGE 75
POC-17i/19i Series 5.3.6.1.4 Parallel Port Configuration Î Parallel Port [Enabled] Use the Parallel Port option to enable or disable the parallel port. Î Î Disabled Î Enabled Disable the parallel port DEFAULT Enable the parallel port Change Settings [Auto] Use the Change Settings option to change the parallel port IO port address and interrupt address. Î Auto DEFAULT The parallel port IO port address and interrupt address are automatically detected.
PAGE 76
POC-17i/19i Series Printer mode EPP-1.7 and SPP Mode ECP and EPP 1.7 Mode 5.3.7 H/W Monitor The H/W Monitor menu (BIOS Menu 10) shows the operating temperature, fan speeds and system voltages. Aptio Setup Utility – Copyright (C) 2010 American Megatrends, Inc. Advanced PC Health Status CPU Temperature SYS Temperature CPU FAN Speed SYS FAN Speed VCC3C V_core +5V +12V +1.5V VSB3V VBAT :+91 C :+58 C :4702 RPM :3722 RPM :+3.360 V :+1.192 V :+5.045 V :+12.056 V :+1.520 V :+3.360 V :+3.
PAGE 77
POC-17i/19i Series o o o o o o o VCC3V Vcore +5V +12 V +1.5V VSB3V VBAT 5.3.8 Serial Port Console Redirection The Serial Port Console Redirection menu (BIOS Menu 11) allows the console redirection options to be configured. Console redirection allows users to maintain a system remotely by re-directing keyboard input and text output through the serial port. Aptio Setup Utility – Copyright (C) 2010 American Megatrends, Inc.
PAGE 78
POC-17i/19i Series 5.4 Chipset Use the Chipset menu (BIOS Menu 12) to access the Northbridge and Southbridge configuration menus WARNING! Setting the wrong values for the Chipset BIOS selections in the Chipset BIOS menu may cause the system to malfunction. Aptio Setup Utility – Copyright (C) 2010 American Megatrends, Inc.
PAGE 79
POC-17i/19i Series 5.4.1 Northbridge Configuration Use the Northbridge Chipset Configuration menu (BIOS Menu 13) to configure the Northbridge chipset. Aptio Setup Utility – Copyright (C) 2010 American Megatrends, Inc.
PAGE 80
POC-17i/19i Series 5.4.2 Southbridge Configuration Use the Southbridge Configuration menu (BIOS Menu 14) to configure the Southbridge chipset. Aptio Setup Utility – Copyright (C) 2010 American Megatrends, Inc. Chipset Auto Power Button Restore AC Power Loss [Disabled] [Power Off] Audio Configuration Azalia HD Audio Set Spread Spectrum [Enabled] [Disabled] When Auto Power Button Function select Enabled the AC power loss will always power on.
PAGE 81
POC-17i/19i Series Î Enabled DEFAULT The onboard High Definition Audio controller automatically detected and enabled Î Set Spread Spectrum [Disabled] Use the Set Spread Spectrum option to enable or disable the Set Spread Spectrum function. Î Disabled Î Enabled DEFAULT Set Spread Spectrum is disabled Set Spread Spectrum is enabled 5.4.3 Intel IGD SWSCI OpRegion Use the Intel IGD SWSCI OpRegion menu (BIOS Menu 15) to configure the video device connected to the system.
PAGE 82
POC-17i/19i Series Î 256 MB Maximum Default Active LFP [Enable LVDS] Use the Active LFP option to enable or disable LVDS. Î Disable DEFAULT LVDS is disabled LVDS Î LVDS is enabled Enable LVDS Î LCD Panel Type [Select by Panel ID] Use the LCD Panel Type option to select the type of flat panel connected to the system. Configuration options are listed below.
PAGE 83
POC-17i/19i Series 5.5 Boot Use the Boot menu (BIOS Menu 16) to configure system boot options. Aptio Setup Utility – Copyright (C) 2010 American Megatrends, Inc. Main Advanced Chipset Boot Security Save & Exit Boot Configuration Quiet Boot Bootup NumLock State Realtek 8111E PXE OpROM [Enabled] [On] [Disabled] Enables/Disables Quiet Boot option --------------------ÅÆ: Select Screen ↑ ↓: Select Item Enter Select +/-: Change Opt.
PAGE 84
POC-17i/19i Series Î Does not enable the keyboard Number Lock Off automatically. To use the 10-keys on the keyboard, press the Number Lock key located on the upper left-hand corner of the 10-key pad. The Number Lock LED on the keyboard lights up when the Number Lock is engaged. Î Realtek 8111E PXE OpROM [Disabled] Use the Realtek 8111E PXE OpROM BIOS option to enable or disable Boot Option for Legacy Network Devices. Î Disabled Î Enabled DEFAULT Disables Boot Option for Legacy Network Devices.
PAGE 85
POC-17i/19i Series Î Administrator Password Use the Administrator Password field to set or change a administrator password. Î User Password Use the User Password field to set or change a user password. Î Set User Password Use the Set User Password field to set or change an HDD user password. NOTE: It is recommended that the system be reset after setting a new HDD password. 5.7 Exit Use the Exit menu (BIOS Menu 18) to load default BIOS values, optimal failsafe values and to save configuration changes.
PAGE 86
POC-17i/19i Series Î Save Changes and Reset Use the Save Changes and Reset option to save the changes made to the BIOS options and reset the system. Î Discard Changes and Reset Use the Discard Changes and Reset option to exit the system without saving the changes made to the BIOS configuration setup program. Î Restore Defaults Use the Restore Defaults option to load the optimal default values for each of the parameters on the Setup menus. F3 key can be used for this operation.
PAGE 87
POC-17i/19i Series Chapter 6 6 Software Drivers Page 75
PAGE 88
POC-17i/19i Series 6.1 Available Software Drivers NOTE: The content of the CD may vary throughout the life cycle of the product and is subject to change without prior notice. Visit the IEI website or contact technical support for the latest updates. The following drivers can be installed on the system: Chipset VGA LAN Audio Touch screen Wireless Keypad function Installation instructions are given below. 6.
PAGE 89
POC-17i/19i Series Figure 6-1: Chipset Driver File Extraction Screen Step 4: When the setup files are completely extracted the Welcome Screen in Figure 6-2 appears. Step 5: Click NEXT to continue. Figure 6-2: Chipset Driver Welcome Screen Step 6: The license agreement in Figure 6-3 appears.
PAGE 90
POC-17i/19i Series Step 7: Read the License Agreement and click YES to continue. Figure 6-3: Chipset Driver License Agreement Step 8: The Readme File Information screen in Figure 6-4 appears. Step 9: Click NEXT to continue. Figure 6-4: Readme File Information Screen Step 10: Setup operations are performed as shown in Figure 6-5.
PAGE 91
POC-17i/19i Series Step 11: Once the setup operations are complete, click NEXT to continue. Figure 6-5: Setup Progress Screen Step 12: The Setup Is Complete screen appears. Step 13: Select “Yes, I want to restart the computer now” and click Finish (Figure 6-6).
PAGE 92
POC-17i/19i Series 6.3 VGA Driver Installation To install the VGA driver, please do the following. Step 1: Access the driver list from the driver CD Step 2: Click VGA and double click on the folder which corresponds to your operating system. Step 3: Double click on the install icon. Step 4: The VGA Readme File in Figure 6-7 appears. Step 5: Click NEXT to continue. Figure 6-7: VGA Driver Readme File Step 6: The installation files are extracted as shown in Figure 6-8. Step 7: Click NEXT to continue.
PAGE 93
POC-17i/19i Series Figure 6-8: VGA Driver Setup File Extraction Screen Step 8: The Welcome Screen in Figure 6-9 appears. Step 9: Click NEXT to continue. Figure 6-9: VGA Driver Welcome Screen Step 10: The License Agreement in Figure 6-10 appears. Step 11: Click YES to accept and continue.
PAGE 94
POC-17i/19i Series Figure 6-10: VGA Driver License Agreement Step 12: The Readme File in Figure 6-11 appears. Step 13: Click NEXT to continue. Figure 6-11: VGA Driver Readme File Step 14: Setup operations are performed as shown in Figure 6-12. Step 15: Once the setup operations are complete, click NEXT to continue.
PAGE 95
POC-17i/19i Series Figure 6-12: VGA Driver Setup Operations Step 16: The Setup Is Complete screen appears. Step 17: Select “Yes, I want to restart the computer now” and click FINISH. See Figure 6-13.
PAGE 96
POC-17i/19i Series 6.4 LAN Driver Installation To install the LAN driver, please do the following. Step 1: Access the driver list from the driver CD Step 2: Locate the installation icon setup.exe and double click on it. Step 3: The Welcome screen in Figure 6-14 appears. Step 4: Click NEXT to continue. Figure 6-14: LAN Driver Welcome Screen Step 5: The Ready to Install screen in Figure 6-15 appears. Step 6: Click INSTALL to proceed with the installation.
PAGE 97
POC-17i/19i Series Figure 6-15: LAN Driver Welcome Screen Step 7: The program begins to install. Step 8: The installation progress can be monitored in the progress bar shown in Figure 6-16. Figure 6-16: LAN Driver Installation Step 9: When the driver installation is complete, the screen in Figure 6-17 appears.
PAGE 98
POC-17i/19i Series Step 10: Click FINISH to exit setup. Figure 6-17: LAN Driver Installation Complete 6.5 Audio Driver Installation To install the Realtek High Definition (HD) Audio driver, please follow the steps below. 6.5.1 BIOS Setup Step 1: Enter the BIOS setup. To do this, reboot the system and press F2 during POST. Step 2: Go to the Southbridge Configuration menu. Set the Audio Controller option to [Azalia]. Step 3: Press F10 to save the changes and exit the BIOS setup. The system reboots. 6.5.
PAGE 99
POC-17i/19i Series Step 3: Locate the install icon and double click on it. Step 4: The InstallShield Wizard starts (Figure 6-18). Figure 6-18: The InstallShield Wizard Starts Step 5: The InstallShield Wizard is prepared to guide the user through the rest of the process (Figure 6-19). Figure 6-19: Preparing Setup Screen Step 6: Once initialized, the InstallShield Wizard welcome screen appears (Figure 6-20). Step 7: Click NEXT to continue the installation.
PAGE 100
POC-17i/19i Series Figure 6-20: InstallShield Wizard Welcome Screen Step 8: InstallShield starts to install the new software as shown in Figure 6-21. Figure 6-21: Audio Driver Progress Screen Step 9: The Installation Wizard updates the system as shown in Figure 6-22.
PAGE 101
POC-17i/19i Series Figure 6-22: Installation Wizard Updates the System Step 10: After the driver installation process is complete, a confirmation screen appears (Figure 6-23). Step 11: The confirmation screen offers the option of restarting the computer now or later. For the settings to take effect, the computer must be restarted. Step 12: Click FINISH to restart the computer.
PAGE 102
POC-17i/19i Series 6.6 Touch Screen Driver To install the touch panel software driver, please follow the steps below. Step 1: Access the driver list from the driver CD Step 2: Click Touch Screen. Step 3: Open the x:\5. Touch Screen\PenMount Windows Universal Driver V2.1.0.263 directory and locate the installation icon setup.exe. Double click on the icon. Step 4: The Welcome Screen appears (Figure 6-24). Step 5: Click NEXT to continue the installation process.
PAGE 103
POC-17i/19i Series Figure 6-25: License Agreement Step 8: Browse for an install location or use the one suggested then click INSTALL to continue (Figure 6-26). Figure 6-26: Choose Install Location Step 9: The Install screen appears and displays the progress of the installation (Figure 6-27). Click NEXT to continue.
PAGE 104
POC-17i/19i Series Figure 6-27: Installing PenMount Universal Driver V2.1.0.263 Step 10: When the installation is complete, click FINISH to exit setup (Figure 6-28). Figure 6-28: PenMount Universal Driver Update Complete 6.7 Wireless Driver To install the wireless driver, please follow the steps below.
PAGE 105
POC-17i/19i Series Step 2: Select an OS folder then double click the installation icon setup.exe. Step 3: The license agreement in Figure 6-29 appears. Figure 6-29: Wireless Driver License Agreement Step 4: Accept the conditions of the license agreement and click NEXT to continue. Step 5: The Configuration Tool Options screen in Figure 6-30 appears next. Step 6: Select the configuration tool in and click NEXT to continue.
PAGE 106
POC-17i/19i Series Figure 6-30: Wireless Driver Configuration Tool Options Step 7: The Wireless Mode Options window in Figure 6-31 appears. Step 8: Click NEXT in Figure 6-31. Figure 6-31: Wireless Mode Select Window Step 9: Click INSTALL in Figure 6-32 to start to install the driver.
PAGE 107
POC-17i/19i Series Figure 6-32: Wireless Driver Installation Step 10: After the installation is complete, click FINISH to exit setup. 6.8 Keypad Driver To install the Keypad software driver, please follow the steps below. Step 1: Select Keypad from the list from the driver CD Step 2: Locate the installation icon “KeypadAP_v2.2.msi” and double click on it. Step 3: The Welcome Screen appears (Figure 6-33). Step 4: Click NEXT to continue the installation process.
PAGE 108
POC-17i/19i Series Figure 6-33: Keypad Driver Welcome Screen Step 5: The Customer Information appears as shown in Figure 6-34. Step 6: Enter user and organization name in the fields provided then click NEXT. Figure 6-34: Customer Information Screen Step 7: Select a setup type (Figure 6-35) and click NEXT.
PAGE 109
POC-17i/19i Series Figure 6-35: Setup Type Step 8: The InstallShield Wizard is ready to install the program. Step 9: Click INSTALL to continue (Figure 6-36). Figure 6-36: Ready to Install the Program Step 10: The installation screen appears and displays the progress of the installation (Figure 6-37).
PAGE 110
POC-17i/19i Series Step 11: Click NEXT to continue. Figure 6-37: Installing KeypadAP v2.2 Step 12: When the installation process is complete, click FINISH. See Figure 6-38. Figure 6-38: Keypad Driver Installation Complete Screen Step 13: The user is then prompted to select to restart the computer now or later (Figure 6-47). For the settings to take effect, the computer must be restarted. Step 14: Click Yes to restart the computer.
PAGE 111
POC-17i/19i Series Figure 6-39: Reboot the Computer Page 99
PAGE 112
POC-17i/19i Series Appendix A A Safety Precautions Page 100
PAGE 113
POC-17i/19i Series WARNING: The precautions outlined in this chapter should be strictly followed. Failure to follow these precautions may result in permanent damage to the POC-17i/19i Series. A.1 Safety Precautions Please follow the safety precautions outlined in the sections that follow: A.1.1 General Safety Precautions Please ensure the following safety precautions are adhered to at all times. Follow the electrostatic precautions outlined below whenever the system is opened.
PAGE 114
POC-17i/19i Series The signal input parts or signal output parts (SIP/SOP) need to be connected properly and any unused SIP/SOP shall not be accessible to unqualified personnel after the LCD is integrated into a medical system. The unit is for exclusive interconnection with IEC 60XXX certified equipment outside of patient environment and IEC 60601-1 certified equipment inside the patient environment. This device complies with EN60601-1-2.
PAGE 115
POC-17i/19i Series This symbol alerts the user that important information concerning the operation and maintenance of this unit has been included. Therefore, the information should be read carefully in order to avoid any problems. ISO 7000-1641: Follow operating instructions or consult instructions for use. Stand-by Direct Current A.1.
PAGE 116
POC-17i/19i Series A.1.4 Product Disposal Outside the European Union - If you wish to dispose of used electrical and electronic products outside the European Union, please contact your local authority so as to comply with the correct disposal method. Within the European Union: EU-wide legislation, as implemented in each Member State, requires that waste electrical and electronic products carrying the mark (left) must be disposed of separately from normal household waste.
PAGE 117
POC-17i/19i Series Be cautious of all small removable components when vacuuming the system. Turn the system off before cleaning the system. Never drop any objects or liquids through the openings of the system. Avoid eating, drinking and smoking within vicinity of the system. A.2.2 Cleaning Tools Some components in the system may only be cleaned using a product specifically designed for the purpose. In such case, the product will be explicitly mentioned in the cleaning tips.
PAGE 118
POC-17i/19i Series Consult the dealer or an experienced radio/TV technician for help. FCC Caution: Any changes or modifications not expressly approved by the party responsible for compliance could void the user's authority to operate this equipment. This device and its antenna(s) must not be co-located or operating in conjunction with any other antenna or transmitter. IMPORTANT NOTE: For product available in the USA/Canada market, only channel 1~11 can be operated.
PAGE 119
POC-17i/19i Series Appendix B B BIOS Options Page 107
PAGE 120
POC-17i/19i Series B.1 BIOS Configuration Options Below is a list of BIOS configuration options described in Chapter 5. System Overview .................................................................................................................52 Memory Information ............................................................................................................52 System Date [xx/xx/xx] ........................................................................................................
PAGE 121
POC-17i/19i Series Realtek 8111E PXE OpROM [Disabled]..............................................................................72 Administrator Password .....................................................................................................73 User Password .....................................................................................................................73 Set User Password ...................................................................................................
PAGE 122
POC-17i/19i Series Appendix C C Watchdog Timer Page 110
PAGE 123
POC-17i/19i Series NOTE: The following discussion applies to DOS environment. IEI support is contacted or the IEI website visited for specific drivers for more sophisticated operating systems, e.g., Windows and Linux. The Watchdog Timer is provided to ensure that standalone systems can always recover from catastrophic conditions that cause the CPU to crash. This condition may have occurred by external EMI or a software bug.
PAGE 124
POC-17i/19i Series NOTE: When exiting a program it is necessary to disable the Watchdog Timer, otherwise the system resets.
PAGE 125
POC-17i/19i Series Appendix D D Hazardous Materials Disclosure Page 113
PAGE 126
POC-17i/19i Series D.1 Hazardous Material Disclosure Table for IPB Products Certified as RoHS Compliant Under 2002/95/EC Without Mercury The details provided in this appendix are to ensure that the product is compliant with the Peoples Republic of China (China) RoHS standards. The table below acknowledges the presences of small quantities of certain materials in the product, and is applicable to China RoHS only.
PAGE 127
POC-17i/19i Series Part Name Toxic or Hazardous Substances and Elements Lead Mercury Cadmium Hexavalent Polybrominated Polybrominated (Pb) (Hg) (Cd) Chromium Biphenyls Diphenyl Ethers (CR(VI)) (PBB) (PBDE) Housing X O O O O X Display X O O O O X Printed Circuit X O O O O X Metal Fasteners X O O O O O Cable Assembly X O O O O X Fan Assembly X O O O O X Power Supply X O O O O X O O O O O O Board Assemblies Battery O: This toxic or hazar
PAGE 128
POC-17i/19i Series 此附件旨在确保本产品符合中国 RoHS 标准。以下表格标示此产品中某有毒物质的含量符合中国 RoHS 标准规定的限量要求。本产品上会附有”环境友好使用期限”的标签，此期限是估算这些物质”不会有泄漏或突变”的年限。本产品可能包含有较短的环境友好使用期限的可替换元件，像是电池或灯管，这些元件将会单独标示出来。部件名称有毒有害物质或元素铅汞镉六价铬多溴联苯多溴二苯醚 (Pb) (Hg) (Cd) (CR(VI)) (PBB) (PBDE) 壳体 X O O O O X 显示 X O O O O X 印刷电路板 X O O O O X 金属螺帽 X O O O O O 电缆组装 X O O O O X 风扇组装 X O O O O X 电力供应组装 X O O O O X 电池 O O O O O O O: 表示该有毒有害物质在该部件所有物质材料中的含量均在 SJ/T11363-2006 标准规定的限量要求以下。 X: