Owner manual

PCISA-PV-D4251/N4551/D5251 CPU Card
Page 49
Figure 4-5: COM 2 Function Select Jumper Location
4.4.4 LVDS Voltage Selection
WARNING:
Permanent damage to the screen and PCISA-PV-D4251/N4551/D5251
may occur if the wrong voltage is selected with this jumper. Please
refer to the user guide that cam with the monitor to select the correct
voltage.
Jumper Label: J_VLVDS1
Jumper Type:
6-pin header
Jumper Settings:
See
Table 4-5
Jumper Location:
See
Figure 4-6
The LVDS Voltage Selection jumper allows the LVDS screen voltage to be set. The
LVDS Voltage Selection jumper settings are shown in
Table 4-5.
LVDS Voltage Select Description
Short 1-2 +3.3 V Default
Short 2-3 +5 V