Owner manual

PCISA-PV-D4251/N4551/D5251 CPU Card
Page 46
Description Label Type
CF card setup JCF1 2-pin header
Clear CMOS J_CMOS1 3-pin header
COM 2 function selection JP2 6-pn header
LVDS LCD voltage selection J_VLVDS1 6-pin header
LVDS LCD resolution selection JP3 6-pin header
PCIe interface setup JP1 2-pin header
Table 4-1: Jumpers
4.4.1 CF Card Setup
Jumper Label: JCF1
Jumper Type:
2-pin header
Jumper Settings:
See
Table 4-2
Jumper Location:
See
Figure 4-3
The CF Card Setup jumper sets the CF Type I card or CF Type II cards as either the slave
device or the master device. CF Card Setup jumper settings are shown in
Table 4-2.
CF Card Setup Description
Open Slave Default
Closed Master
Table 4-2: CF Card Setup Jumper Settings
The CF Card Setup jumper location is shown in Figure 4-3.