Owner manual

PCISA-PV-D4251/N4551/D5251 CPU Card
Page 45
Figure 4-2: Connect Fan Cable
4.4 Jumper Settings
NOTE:
A jumper is a metal bridge used to close
an electrical circuit. It consists of two or
three metal pins and a small metal clip
(often protected by a plastic cover) that
slides over the pins to connect them. To
CLOSE/SHORT a jumper means
connecting the pins of the jumper with
the plastic clip and to OPEN a jumper means removing the plastic clip
from a jumper.
The PCISA-PV-D4251/N4551/D5251 includes one jumper shown in Table 4-1.