Owner manual

PCISA-PV-D4251/N4551/D5251 CPU Card
Page 17
3.1.3 External Interface Panel Connectors
The table below lists the connectors on the external I/O panel.
Connector Type Label
CRT connector 15-pin female
connector
VGA1
Ethernet connector (1) RJ-45 connector LAN1
Ethernet connector (2) RJ-45 connector LAN2
USB 2.0 port (1) USB port connector USB_C1
USB 2.0 port (2) USB port connector USB_C2
Table 3–2: External Peripheral Connectors
3.2 Internal Peripheral Connectors
The section describes all of the connectors on the PCISA-PV-D4251/N4551/D5251.
3.2.1 ATX Power Supply Enable Connector
CN Label: ATXCTL1
CN Type:
3-pin wafer (1x3)
CN Location:
See
Figure 3-2
CN Pinouts:
See
Table 3-3
The ATX power supply enable connector enables the PCISA-PV-D4251/N4551/D5251 to
be connected to an ATX power supply.
Figure 3-2: ATX Power Supply Enable Connector Location