Instruction Manual

PCISA-945GSE CPU Card
Page 73
Jumper Settings:
See
Table 5-7
Jumper Location:
See
Figure 5-3
The LVDS Voltage Selection jumper allows the LVDS screen voltage to be set. The
LVDS Voltage Selection jumper settings are shown in
Table 5-7.
LCD Voltage Select Description
1-2 3.3 V
2-3 5 V
Table 5-7: LVDS Voltage Selection Jumper Settings
5.7 Chassis Installation
5.7.1 Airflow
WARNING:
Airflow is critical to the cooling of the CPU and other onboard
components. The chassis in which the PCISA-945GSE must have air
vents to allow cool air to move into the system and hot air to move out.
The PCISA-945GSE must be installed in a chassis with ventilation holes on the sides
allowing airflow to travel through the heat sink surface. In a system with an individual
power supply unit, the cooling fan of a power supply can also help generate airflow
through the board surface.
NOTE:
IEI has a wide range of backplanes available. Please contact your
PCISA-945GSE vendor, reseller or an IEI sales representative at
[e-mail] or visit the IEI website (3http://www.ieiworld.com.tw)
to find out more about the available chassis.