Instruction Manual

PCISA-945GSE CPU Card
Page 69
Figure 5-3: Jumper Location
5.6.1 AT/ATX Power Selection
Jumper Label: ATXCTL1 and J_AUTOPWR1
Jumper Type:
3-pin wafer and 2-pin header
Jumper Settings:
See
Table 5-2
Jumper Location:
See
Figure 5-3
The AT/ATX power selection jumpers set the system power mode as AT or ATX. Jumper
settings are shown below.
Jumper ATXCTL1 J_AUTOPWR1
AT 1-2 Short