Owner's manual

NANO-CV-D25501/N26001 EPIC SBC
Page 42
NOTE:
If installing the Windows® 7 OS by using the USB 3.0 ports, loading the
USB 3.0 driver during OS installation is necessary. Refer to Section
4.8 for detailed installation procedure.
3.3.5 VGA Connector
CN Label: VGA1
CN Type:
15-pin Female
CN Location:
See Figure 3-23
CN Pinouts:
See Figure 3-26 and Table 3-30
The VGA connector connects to a monitor that accepts a standard VGA input.
Pin Description Pin Description
1 RED 2 GREEN
3 BLUE 4 NC
5 GND 6 GND
7 GND 8 GND
9 VCC 10 GND
11 NC 12 DDCDAT
13 HSYNC 14 VSYNC
15 DDCCLK
Table 3-30: VGA Connector Pinouts
Figure 3-26: VGA Connector