Owner's manual

NANO-CV-D25501/N26001 EPIC SBC
Page 95

Disabled DEFAULT
Disables the LVDS1 connector.

Enabled
Enables the LVDS1 connector.
 IGFX - Boot Type [VBIOS Default]
Use the IGFX - Boot Type option to select the display device used by the system when it
boots. Configuration options are listed below.
 VBIOS Default
DEFAULT
 CRT
 CRT+HDMI
 LVDS1
 LVDS2
 LVDS1 Panel Type [800x600 LVDS]
Use the LVDS1 Panel Type option to select the type of flat panel connected to the LVDS1
connector. Configuration options are listed below.
 640x480 LVDS
 800x600 LVDS D
EFAULT
 1024x768 LVDS
 1280x1024 LVDS
 1366x768 LVDS
 1024x600 LVDS
 1280x800 LVDS
 Backlight Control [Inverted]
Use the Backlight Control option to select the backlight control mode.

Normal
Brightest at high voltage level

Inverted DEFAULT
Brightest at low voltage level