Owner's manual

NANO-945GSE EPIC Motherboard
Page 83
Figure 4-9: LVDS Voltage Selection Jumper Pinout Locations
4.5.7 PCI-104 Voltage Setup
Jumper Label: JP2
Jumper Type:
3-pin header
Jumper Settings: See Table 4-8
Jumper Loc
ation: See Figure 5-10
The PCI-104 Voltage Setup jumper settings are shown in Table 4-7.
CAUTION:
The default for this jumper is “All Open” meaning the user must select
the voltage to be used.
PCI-104 Voltage Setup Description
Short 1-2 +5V
Short 2-3 +3.3V
Table 4-8: PCI-104 Voltage Setup Jumper Settings
The PCI-104 Voltage Setup jumper location. is shown in Figure 4-9.