Owner's manual

NANO-945GSE EPIC Motherboard
Page 80
The COM 2 Function Select jumper sets the communication protocol used by the second
serial communications port (COM 2) as RS-232, RS-422 or RS-485. The COM 2 Function
Select settings are shown in Table 4-5.
COM 2 Function Select Description
Short 1-2 RS-232 Default
Short 3-4 RS-422
Short 5-6 RS-485
Table 4-5: COM 2 Function Select Jumper Settings
The COM 2 Function Select jumper location is shown in Figure 4-7.
Figure 4-7: COM 2 Function Select Jumper Location
4.5.5 LVDS1 Panel Resolution Jumper
Jumper Label: J_LCD_TYPE1
Jumper Type:
8-pin header
Jumper Settings:
See Table 4-6
Jumper Loc
ation:
See Figure 4-8
The LVDS1
Panel Resolution jumper allows the resolution of the LVDS screens
connected to the LVDS1 connector to be configured. The LVDS1 Panel Resolution jumper
settings are shown in Table 4-6.