User Manual

NANO-9452 EPIC Motherboard
Page 25
3.1 Anti-static Precautions
WARNING:
Failure to take ESD precautions during the installation of the
NANO-9452 may result in permanent damage to the NANO-9452 and
severe injury to the user.
Electrostatic discharge (ESD) can cause serious damage to electronic components,
including the NANO-9452. Dry climates are especially susceptible to ESD. It is therefore
critical that whenever the NANO-9452, or any other electrical component is handled, the
following anti-static precautions are strictly adhered to.
 Wear an anti-static wristband: - W earing a simple anti-static wristband can
help to prevent ESD from damaging the board.
 Self-grounding:- Before handling the board touch any grounded condu cting
material. During the time the board is handled, frequently touch an y
conducting materials that are connected to the ground.
 Use an anti-static pad: When configuring the NANO-9452, place it on an
antic-static pad. This reduces the possibi lity of ESD damaging the
NANO-9452.
 Only handle the edges of the PCB:- When handling the PCB, hold the PCB
by the edges.
3.2 Unpacking
3.2.1 Unpacking Precautions
When the NANO-945 2 is unpacked, please do the followin g:
 Follow the anti-static precautions outlined in Section 3.1.

Make sure the p a cking b ox is facing up wards so th e NANO -9 452 doe s not fall
out of the box.
 Make sure all the compo nents shown in Section 3.3 are present.