User Manual

NANO-9452 EPIC Motherboard
Page 152
7.1 Available Software Drivers
NOTE:
The content of the CD may vary througho ut the life cycle of the product
and is subject to change without prior notice. You may visit the IEI
website or contact technical sup port for the latest updates.
The following drivers can b e installed on the system.
 Chipset driver
 VGA driver
 LAN driver
Installation instructions are given below.
7.2 Driver CD Auto-run
All the drivers for the NANO-9452 are on the CD that came with the system. To install the
drivers, please follow the steps below.
Step 1: Insert the CD into a CD drive connecte d to the system.
Step 2: The starts up automatically
Step 3: Select NANO-9452 from the initial menu shown in Figure 7-1.