User's Manual
MODAT-328
Page 19
Step 7: Insert the MODAT-328 into the cradle to start charging the battery (Figure 2-5).
Step 7:
Figure 2-5: Inserting the MODAT-328 to the charging cradle
2.4 Powering-On/Off
NOTE:
Before using the MODAT-328 for the first time, the battery must be
charged for at least 4 hours. After that, the battery may be charged as
needed.
To power-on/off the MODAT-328, please follow the steps below:
Power-On: Push the power button once. The start up screen should display.
Power-Off: Hold the power button down for a few seconds until the screen shuts off.