MODAT-328 IEI Technology Corp. MODEL: MODAT-328 Multi-functional Stocktaking PDA featuring Marvell PXA310 and Microsoft® Windows® Mobile 6.5 OS User Manual Page I Rev. 1.
MODAT-328 Revision Date Version Changes February 2012 1.03 Updated Power Adapter December 2011 1.02 Added note to Section 2.3 Charging the System and Section 2.4 Powering-On/Off August 2011 1.01 Updated Section 2.3: Charging the System Added Section 2.6: Synchronized with Windows 7 System Added text size adjustment information May 2011 Page II 1.
MODAT-328 Copyright COPYRIGHT NOTICE The information in this document is subject to change without prior notice in order to improve reliability, design and function and does not represent a commitment on the part of the manufacturer. In no event will the manufacturer be liable for direct, indirect, special, incidental, or consequential damages arising out of the use or inability to use the product or documentation, even if advised of the possibility of such damages.
MODAT-328 WARNING This device complies with Part 15 of the FCC Rules. Operation is subject to the following two conditions: (1) this device may not cause harmful interference, and (2) this device must accept any interference received, including interference that may cause undesired operation. NOTE: This equipment has been tested and found to comply with the limits for a Class B digital device, pursuant to part 15 of the FCC Rules.
MODAT-328 Table of Contents 1 INTRODUCTION.......................................................................................................... 1 1.1 OVERVIEW.................................................................................................................. 2 1.2 FEATURE .................................................................................................................... 2 1.3 APPLICATIONS ...................................................................................
MODAT-328 A.2 MAINTENANCE AND CLEANING PRECAUTIONS ........................................................ 26 A.2.1 Maintenance and Cleaning.............................................................................. 26 A.2.2 Cleaning Tools ................................................................................................. 27 B INTERNATIONAL STANDARDS COMPLIANCE ............................................... 28 B.1 EN 60601-1, EN 60601-2 ....................................................
MODAT-328 List of Figures Figure 1-1: MODAT-328 ..................................................................................................................2 Figure 1-2: MODAT-328 Front Panel .............................................................................................4 Figure 1-3: MODAT-328 Keypad ....................................................................................................6 Figure 1-4: MODAT-328 Left Panel.......................................................
MODAT-328 List of Tables Table 1-1: MODAT-328 System Specifications ..........................................................................11 Table 2-1: Packing List .................................................................................................................16 Table 2-2: Optional Items List .....................................................................................................
MODAT-328 Chapter 1 1 Introduction Page 1
MODAT-328 1.1 Overview Figure 1-1: MODAT-328 The MODAT-328, with built-in Microsoft® Windows® Mobile 6.5, is a stocktaking PDA which provides an all-in-one warehouse management solution. The MODAT-328 packs advanced data acquisition technologies such as RFID, 1D/2D bar code reading, and a 3 Megapixel CMOS camera into a compact, ergonomic design.
MODAT-328 Mini USB client (for ActiveSync and battery charging) Wi-Fi 802.11b/g Bluetooth 2.1 + EDR Windows Mobile 6.5 preinstalled Supports Visual Studio .NET and .NET Compact Framework development tools Mobile application downloads: Windows Marketplace for Mobile (http://www.windowsmarketplace.com) 1.3 Applications The MODAT-328 can be applied in the following areas: MES Retail Logistics Warehouse 1.
MODAT-328 1.4.1 Front Panel The front panel of the MODAT-328 is shown below. Figure 1-2: MODAT-328 Front Panel 1 x Speaker 1 x Keypad 1 x 2.8” TFT LCD (Touch Screen) 1 x Function Key 1 x 5D Navigation Key 1 x Microphone The two LEDs on the front panel indicate battery and WiFi status as described in the following table.
MODAT-328 Battery LED (Right) WiFi LED (Left) Charging Orange -- Fully Charged Green -- WiFi Connection -- Green NOTE: The user can adjust the text size showed on the screen by going to “Start” “Settings” “System” “Screen”.
MODAT-328 1.4.1.1 Keypad The keypad and its functions are shown below. Figure 1-3: MODAT-328 Keypad Press the “Alpha” key to switch between using the blue characters and the numeric keys.
MODAT-328 1.4.2 Left Panel The left panel of the MODAT-328 is shown below.
MODAT-328 1.4.3 Right Panel The right panel of the MODAT-328 is shown in Figure 1-5.
MODAT-328 1.4.4 Bottom Panel The bottom panel of the MODAT-328 is shown below. Figure 1-6: MODAT-328 Bottom Panel 1 x 16-pin cradle charging connector 1.4.5 Back Panel The rear panel of the MODAT-328 is shown below.
MODAT-328 1 x 3 Megapixel Camera 1 x RFID 1 x 1880mAh Battery 1 x Lock Key 1.5 Specifications The technical specifications for the MODAT-328 systems are listed in Table 1-1. Specification MODAT-328 Microprocessor Marvell® PXA 310 624MHz OS Windows Mobile 6.5 Memory 256 MB Flash 128 MB SDRAM Display Data LCD Size 2.8” TFT LCD Brightness (cd/m^2) 240 cd/m^2 Max Resolution 240 (H) x 320 (V) QVGA Viewing Angle 70/50/70/70 Deg.
MODAT-328 Specification MODAT-328 Indicators 1 x Charging Status / Full LED (Orange/Green) 1 x Wi-Fi Enabled / Disabled LED (Green) I/O 1 x Mini USB (OTG) 1 x 16-pin connector (RS-232, battery charging, OTG-Host, OTG-Client) Power 3.7V 1880 mAh battery Power Adapter Input: 100 V AC to 240 V AC ~ 50 - 60Hz 0.2A Output: 5 V 2.1A Temperature Operating: -10C ~ +50C Storage: -20C ~ +60C Humidity 5%~95%, non-condensing Impact Resistance 1.
MODAT-328 1.
MODAT-328 Chapter 2 2 Installation Page 13
MODAT-328 2.1 Getting Started The installation steps below should be followed in order. Step 1: Unpack the device. Step 2: Check that all parts are included. Step 3: Charge the MODAT-328. Step 4: Power up the system.Ste p0: 2.2 Unpacking the Device WARNING! Only remove the protective plastic cover stuck to the front screen after installation. The plastic layer protects the screen surface during the installation process. To unpack the MODAT-328, follow these steps: Step 1: Cut the sealing tape.
MODAT-328 The MODAT-328 is shipped with the following components: Quantity Item 1 MODAT-328 1 Battery Pack (3.
MODAT-328 Quantity Item 1 User’s Manual CD ROM Image P/N: 7B000-000550-RS Table 2-1: Packing List 2.2.2 Optional Items The following items are optional accessories for the MODAT-328: Quantity Item 1 MODAT-328 charging cradle Image P/N: MODAT-300-CR01-R10 1 Battery Pack (3.7V 3000 mAh) P/N: 31603-000017-RS 1 16-pin cable P/N: 32024-001500-100-RS Table 2-2: Optional Items List 2.
MODAT-328 To start using the MODAT-328, the user must charge the MODAT-328 by the power adapter. To charge the MODAT-328, please follow the steps below. Step 1: Fold back the protective rubber flap to expose the mini-USB port. Step 2: Connect the mini-USB plug of the USB cable to the mini-USB connector on the left side panel of the MODAT-328 (Figure 2-1). Figure 2-1: MODAT-328 Mini USB Port Step 3: Connect the USB cable to the USB connector of the power adapter (Figure 2-2).
MODAT-328 Step 4: The battery LED lights up orange to indicate that the battery is charging (Figure 2-3). When the battery is fully charged, the battery LED turns green. Step 4: Figure 2-3: Battery Charging LED 2.3.1 Using the Optional Cradle To charge the MODAT-328 using the optional charging cradle, follow the steps below. Step 5: Connect the mini USB cable to the rear side of the charging cradle (Figure 2-4).
MODAT-328 Step 7: Insert the MODAT-328 into the cradle to start charging the battery (Figure 2-5). Step 7: Figure 2-5: Inserting the MODAT-328 to the charging cradle 2.4 Powering-On/Off NOTE: Before using the MODAT-328 for the first time, the battery must be charged for at least 4 hours. After that, the battery may be charged as needed. To power-on/off the MODAT-328, please follow the steps below: Power-On: Push the power button once. The start up screen should display.
MODAT-328 Figure 2-6: Power Button 2.5 R esetting the System CAUTION: Resetting the MODAT-328 may result in losing unsaved data. Before resetting the MODAT-328, remember to backup unsaved data using ActiveSync or by saving data directly onto a microSD card. To reset the MODAT-328 please follow the steps below: Reset: Insert the tip of your stylus or a ballpoint pen into the reset button (Figure 2-7). The MODAT-328 will shut down and restart after a few seconds.
MODAT-328 Figure 2-7: Reset Button 2.6 Synchronized with Windows 7 System The MODAT-328 can be synchronized with a PC through USB connection. To synchronize with the Windows 7 system, please make sure to switch the USB mode to RNDIS mode (USB to PC) in the MODAT-328. To switch the USB mode, follow the steps below: Step 8: Power on the MODAT-328. Step 9: Go to “Start” “Settings” “Connections” “USB to PC”. Step 10: Check the “Enable advanced network functionality” option.
MODAT-328 Figure 2-8: USB to PC Window Page 22
MODAT-328 Appendix A A Safety Precautions Page 23
MODAT-328 WARNING: The precautions outlined in this chapter should be strictly followed. Failure to follow these precautions may result in permanent damage to the MODAT-328. A.1 Safety Precautions Please follow the safety precautions outlined in the sections that follow: A.1.1 General Safety Precautions Please ensure the following safety precautions are adhered to at all times. Follow the electrostatic precautions outlined below whenever the MODAT-328 is opened.
MODAT-328 A.1.2 Anti-static Precautions WARNING: Failure to take ESD precautions during the installation of the MODAT-328 may result in permanent damage to the MODAT-328 and severe injury to the user. Electrostatic discharge (ESD) can cause serious damage to electronic components, including the MODAT-328. Dry climates are especially susceptible to ESD.
MODAT-328 Outside the European Union - If you wish to dispose of used electrical and electronic products outside the European Union, please contact your local authority so as to comply with the correct disposal method. Within the European Union: EU-wide legislation, as implemented in each Member State, requires that waste electrical and electronic products carrying the mark (left) must be disposed of separately from normal household waste.
MODAT-328 A.2.2 Cleaning Tools Some components in the MODAT-328 may only be cleaned using a product specifically designed for the purpose. In such case, the product will be explicitly mentioned in the cleaning tips. Below is a list of items to use when cleaning the MODAT-328. Cloth – Although paper towels or tissues can be used, a soft, clean piece of cloth is recommended when cleaning the MODAT-328.
MODAT-328 Appendix B B International Standards Compliance Page 28
MODAT-328 B.1 EN 60601-1, EN 60601-2 The LCD monitor complies with the EN 60601-1 and EN 60601-2 of related European standards. B.2 FCC We hereby declare that the equipment specified above conforms to the technical standards as specified in the FCC Rules.
MODAT-328 Appendix C C Hazardous Materials Disclosure Page 30
MODAT-328 C.1 Hazardous Materials Disclosure Table for IPB Products Certified as RoHS Compliant Under 2002/95/EC Without Mercury The details provided in this appendix are to ensure that the product is compliant with the Peoples Republic of China (China) RoHS standards. The table below acknowledges the presences of small quantities of certain materials in the product, and is applicable to China RoHS only.
MODAT-328 Part Name Toxic or Hazardous Substances and Elements Lead Mercury Cadmium Hexavalen Polybrominated Polybrominated (Pb) (Hg) (Cd) t Biphenyls Diphenyl Chromium (PBB) Ethers (CR(VI)) (PBDE) Housing X O O O O X Display X O O O O X Printed Circuit X O O O O X X O O O O O X O O O O X Fan Assembly X O O O O X Power Supply X O O O O X O O O O O O Board Metal Fasteners Cable Assembly Assemblies Battery O: This toxic or hazardous subs
MODAT-328 此附件旨在确保本产品符合中国 RoHS 标准。以下表格标示此产品中某有毒物质的含量符 合中国 RoHS 标准规定的限量要求。 本产品上会附有”环境友好使用期限”的标签，此期限是估算这些物质”不会有泄漏或突变”的 年限。本产品可能包含有较短的环境友好使用期限的可替换元件，像是电池或灯管，这些元 件将会单独标示出来。 部件名称 有毒有害物质或元素 铅 汞 镉 六价铬 多溴联苯 多溴二苯 (Pb) (Hg) (Cd) (CR(VI)) (PBB) 醚 (PBDE) 壳体 X O O O O X 显示 X O O O O X 印刷电路板 X O O O O X 金属螺帽 X O O O O O 电缆组装 X O O O O X 风扇组装 X O O O O X 电力供应组装 X O O O O X 电池 O O O O O O O: 表示该有毒有害物质在该部件所有物质材料中的含量均在 SJ/T11363-2006 标准规定的限量要求以下。 X: 表示该有毒有害
