Owner's manual

ManualsBrandsIEI Integration ManualsComputersLKM_Series

Table Of Contents

1 Introduction
2 Detailed Specifications
3 Installation
4 On-Screen-Display and LCD Module Controls
- 4.1 OSD Controls
- 4.2 LCM Controls (8-Port KVMA Models)
  - 4.2.1 LCM Buttons
  - 4.2.2 LCM Functions
A Safety Precautions
- A.1 Safety Precautions
  - A.1.1 General Safety Precautions
  - A.1.2 Anti-static Precautions
- A.2 Maintenance and Cleaning Precautions
  - A.2.1 Maintenance and Cleaning
  - A.2.2 Cleaning Tools
B Hazardous Materials Disclosure
- B.1 Hazardous Material Disclosure Table for IPB Products Certified as RoHS Compliant Under 2002/95/EC Without Mercury
C Index

Page i

LKM Series Console Drawer

Summary of content (81 pages)

PAGE 1
LKM Series Console Drawer Page i
PAGE 2
KINO-LUKE-R20 Half-size CPU Card LKM Series Console Drawer Revision Date Version Changes 2007-08-15 1.01 Added LKM-927 series Updated formatting 2006-11-06 Page ii 1.
PAGE 3
LKM Series Console Drawer Copyright COPYRIGHT NOTICE The information in this document is subject to change without prior notice in order to improve reliability, design and function and does not represent a commitment on the part of the manufacturer. In no event will the manufacturer be liable for direct, indirect, special, incidental, or consequential damages arising out of the use or inability to use the product or documentation, even if advised of the possibility of such damages.
PAGE 4
KINO-LUKE-R20 Half-size CPU Card LKM Series Console Drawer Manual Conventions WARNING! Warnings appear where overlooked details may cause damage to the equipment or result in personal injury. Warnings should be taken seriously. Warnings are easy to recognize. The word “warning” is written as “WARNING,” both capitalized and bold and is followed by text. The text is the warning message. A warning message is shown below: WARNING: This is an example of a warning message.
PAGE 5
LKM Series Console Drawer CAUTION: This is an example of a caution message. Failure to adhere to cautions messages may result in permanent damage to the LKM series console. Please take caution messages seriously. NOTE: These messages inform the reader of essential but non-critical information. These messages should be read carefully as any directions or instructions contained therein can help avoid making mistakes. Notes are easy to recognize.
PAGE 6
KINO-LUKE-R20 Half-size CPU Card LKM Series Console Drawer Packing List NOTE: If any of the components listed in the checklist below are missing, please do not proceed with the installation. Contact the IEI reseller or vendor you purchased the LKM series console from or contact an IEI sales representative directly. To contact an IEI sales representative, please send an email to sales@iei.com.tw. The items listed below should all be included in the package.
PAGE 7
LKM Series Console Drawer Table of Contents 1 INTRODUCTION..................................................................................................... 1 1.1 LKM SERIES CONSOLE DRAWER OVERVIEW ............................................................. 2 1.1.1 LKM Series Console Drawer Introduction ........................................................ 2 1.1.2 LKM Series Console Drawer Features.............................................................. 3 1.1.
PAGE 8
KINO-LUKE-R20 Half-size CPU Card 3 LKM Series Console Drawer INSTALLATION .................................................................................................... 25 3.1 INSTALLATION PRECAUTIONS ................................................................................... 26 3.2 UNPACKING.............................................................................................................. 26 3.2.1 Packaging ........................................................................
PAGE 9
LKM Series Console Drawer 4.2.2.3 Station Name Editing ................................................................................ 52 A SAFETY PRECAUTIONS..................................................................................... 55 A.1 SAFETY PRECAUTIONS ............................................................................................ 56 A.1.1 General Safety Precautions ............................................................................. 56 A.1.
PAGE 10
KINO-LUKE-R20 Half-size CPU Card LKM Series Console Drawer List of Figures Figure 1-1: LKM Console Drawer .................................................................................................2 Figure 1-2: LKM General Overview ..............................................................................................6 Figure 1-3: LKM Keyboard Tray ...................................................................................................7 Figure 1-4: LKM-926 Side View ...............
PAGE 11
LKM Series Console Drawer Figure 4-5: User Sub-Menu.........................................................................................................47 Figure 4-6: Image Menu ..............................................................................................................48 Figure 4-7: Tools Menu ...............................................................................................................49 Figure 4-8: OSD Sub-Menu .......................................................
PAGE 12
KINO-LUKE-R20 Half-size CPU Card LKM Series Console Drawer List of Tables Table 1-1: LKM Series Console Drawer Model Variations.........................................................4 Table 2-1: LKM Series Specifications........................................................................................15 Table 2-2: General Physical Dimensions ..................................................................................16 Table 2-3: LKM Series console drawer LCD Specifications..................
PAGE 13
LKM Series Console Drawer Glossary AC ’97 Audio Codec 97 HDD Hard Disk Drive ACPI Advanced Configuration and IDE Integrated Data Electronics Power Interface I/O Input/Output APM Advanced Power Management ICH4 I/O Controller Hub 4 ARMD ATAPI Removable Media Device L1 Cache Level 1 Cache ASKIR Shift Keyed Infrared L2 Cache Level 2 Cache ATA Advanced Technology LCD Liquid Crystal Display Attachments LPT Parallel Port Connector BIOS Basic Input/Output System LVDS Low Voltage Diff
PAGE 14
THIS PAGE IS INTENTIONALLY LEFT BLANK Page xiv
PAGE 15
LKM Series Console Drawer Chapter 1 1 Introduction Page 1
PAGE 16
LKM Series Console Drawer WARNING: All safety guidelines are specified in Appendix A. Failure to adhere to the safety and maintenance guidelines in Appendix A may result in permanent damage to the LKM series console drawer and/or serious or fatal injuries to the user. 1.1 LKM Series Console Drawer Overview Figure 1-1: LKM Console Drawer 1.1.
PAGE 17
LKM Series Console Drawer The LKM Series console drawer is designed to deliver considerable return on investment. Saving time, money and valuable server room real estate, it can be rack mounted at any user-height. With a host of advanced features designed to protect your investment, the series includes: intelligent OSD (On Screen Display) menus, hot key switching, auto-sensing of computers and multi-language support.
PAGE 18
LKM Series Console Drawer Installation is as simple as connecting cables between the KVMA switch and computers. Ideal for an Internet data center, server room, testing lab, and network-operating center where multiple computers are required. 1.1.4 Model Variations The LKM Series console drawer comes in a variety of models. The models have special features as identified by their model name.
PAGE 19
LKM Series Console Drawer 1.1.5 Model Options Table 1-1 lists the standard features for the LKM Series console drawer model variations. However, there are a variety of additional options available for the LKM Series console drawer as identified by specific product codes. The product code options for the LKM Series console drawer are: (8) – specifies an eight port KVMA switch; these models also include an LCD module (LCM) on the keyboard tray.
PAGE 20
LKM Series Console Drawer Figure 1-2: LKM General Overview 1.2.
PAGE 21
LKM Series Console Drawer Figure 1-3 shows the LKM series console drawer keyboard tray.
PAGE 22
LKM Series Console Drawer 1.2.3 LKM Side View 1.2.3.1 LKM-926 Side View The sides of the console drawer have holes for rack mounting. Refer to Section 3.5 for complete mounting details. Figure 1-4 shows the side view of the LKM-926 series console drawer.
PAGE 23
LKM Series Console Drawer 1.2.3.2 LKM-935 Side View The LKM-935 series console drawer is similar to the LKM-926 series with the following notable exceptions: The access door and LCD screen each have an additional handle for easy access. The LCD screen and keyboard tray can move independently of one another so that the LCD screen can be viewed while the keyboard tray is in the stowed position. Note that the keyboard tray cannot be accessed independently of the LCD screen.
PAGE 24
LKM Series Console Drawer 1.2.4 LKM Access Door The front of the console drawer consists of an access door with two spring-loaded, freewheeling retention screws for securing the access door when the LCD and keyboard are in the stowed position. Also located on the front of the console drawer are two metal clips with slotted holes for rack mounting. Refer to Section 3.5 for complete mounting details. Figure 1-6 shows the access door of the LKM-926 series console drawer.
PAGE 25
LKM Series Console Drawer 1.2.5 LKM Rear View 1.2.5.1 Single Port KVMA The rear panel of the drawer consists of industry standard VGA, keyboard, mouse and audio connectors, as well as a power connector and cooling vents. Figure 1-7 shows the rear view of the LKM-926 series console drawer. Figure 1-7: Single Port KVMA Rear View 1.2.5.2 KVMA 8-Port Switch The KVMA 8-port switch can be used to connect up to eight systems to the LKM series console drawer.
PAGE 26
LKM Series Console Drawer 1.3 Certifications All LKM series console drawer models comply with the following international standard: RoHS For a more detailed description of this standard, please refer to Appendix B. 1.4 Maintenance and Troubleshooting All LKM series console drawer models require no maintenance and should provide trouble-free service. If any component of an LKM series console drawer fails to operate, malfunctions, or otherwise appears to be broken, do not attempt to fix it.
PAGE 27
LKM Series Console Drawer Chapter 2 2 Detailed Specifications Page 13
PAGE 28
LKM Series Console Drawer 2.1 Series Specifications Table 2-1 shows the LKM Series console drawer specifications. LKM-926 series LKM-927 series LKM-935 series 15" TFT 17" TFT 15" TFT XGA SXGA XGA 1024x768 1280x1024 1024x768 50,000 Hrs 50,000 Hrs 50,000 Hrs Contrast 400:1 800:1 400:1 LCD Color 262K 16.7M 262K 350 300 350 160°/160° 120°/100° LCD Type Input Interface Max.
PAGE 29
LKM Series Console Drawer LKM-926 series LKM-927 series LKM-935 series Independent No No Yes 521 x 432.6 x 44 572 x 436 x 44 536 x 433.6 x 44 17Kg 17Kg 17Kg KB/LCD Trays Dimensions (L x W x H) (mm) Weight (Gross/Net) Color Black (Pantone Black C), White (Pantone 413C) 5 ~ 17 Hz, 0.1” double amplitude displacement Vibration 17 ~ 640 Hz, 1.
PAGE 30
LKM Series Console Drawer 2.2 Physical Dimensions The following sections describe the physical dimensions for each model of the LKM Series console drawer. 2.2.1 General Physical Dimensions General physical dimensions for the LKM Series console drawers are shown in Table 2-2. Model Length Width Height (mm) (mm) (mm) LKM-926 521 432.6 44 LKM-927 572 436 44 LKM-935 536 433.
PAGE 31
LKM Series Console Drawer 2.2.2 LKM-926 Physical Dimensions The physical dimensions of the LKM-926 are shown in Figure 2-1.
PAGE 32
LKM Series Console Drawer 2.2.3 LKM-927 Physical Dimensions The physical dimensions of the LKM-927 are shown in Figure 2-2.
PAGE 33
LKM Series Console Drawer 2.2.4 LKM-935 Physical Dimensions The physical dimensions of the LKM-935 are shown in Figure 2-3.
PAGE 34
LKM Series Console Drawer 2.2.5 LCD Specifications Table 2-3 lists the LKM Series console drawer LCD specifications. Size 15" 17" Mfr./Model AUO / G150XG01 AUO / M170EG01 VD Resolution (pixel) XGA (1024 x 768) SXGA (1280 x 1024) 304.1 x 228.1 337.920 x 270.336 0.297 0.264 TN TN Number of Colors 262K 16.7M View Angle (H/V) 120°/100° 160°/160° 350 300 400:1 800:1 16ms (Tr+Tf) 5ms (Tr+Tf) 11.5W 25.
PAGE 35
LKM Series Console Drawer 2.3 Power Adapters 2.3.1 5V/12V AC/DC Power Adapter Table 2-4 lists the 5V/12V AC/DC power adapter specifications. MFR./Model Sinpro/SPU45E-201 Power 42 Watt AC/DC Adapter General Description Universal Input 90 to 264 VAC EMI Meets FCC Part-15/CISPR 22 Class B MTBF 100Khrs Input Voltage Range 90-264VAC Input Frequency 47-63 Hz Inrush Current 30A max. (Cold Start) Hold-up Time 10mS typical Leakage Current 0.75mA max.
PAGE 36
LKM Series Console Drawer The 5V/12V AC/DC power adapter is shown in Figure 2-4. Figure 2-4: 5V/12V AC/DC Power Adapter The physical dimensions of the 5V/12V AC/DC power adapter are shown in Figure 2-5.
PAGE 37
LKM Series Console Drawer 2.3.2 24V/48V DC Input Power Adapters Table 2-5 lists the 24V/48V DC power adapter specifications. MFR./Model EMI Standards 24V DC Input 48V DC Input Skynet / ACE-023C Skynet / ACE-023T FCC Docket 20780 curve”B” EN 55022”B” IEC-61000-4-2: 4KV contact; 8KV air discharge criterion B EMS Standards IEC-61000-4-3: 3V/M with 80% AM criterion A IEC-61000-4-4: 2KV criterion B Input Voltage Range 18VDC - 32VDC 36VDC - 72VDC Input Current 2.5A max.
PAGE 38
LKM Series Console Drawer The physical dimensions of the 24V/48V DC power adapter are shown in Figure 2-6.
PAGE 39
LKM Series Console Drawer Chapter 3 3 Installation Page 25
PAGE 40
LKM Series Console Drawer 3.1 Installation Precautions When installing the LKM series console drawer, please follow the precautions listed below: Read the user manual: The user manual provides a complete description of the LKM series console drawer, installation instructions and configuration options. DANGER! Disconnect Power: Power to the console drawer must be disconnected when installing the LKM series console drawer.
PAGE 41
LKM Series Console Drawer 3.2.2 Unpacking Procedure To unpack the LKM series console drawer, follow the steps below: WARNING: The LCD screen has a protective plastic cover stuck to the screen. Remove the plastic cover only after the LKM series console drawer has been properly installed. This ensures the screen is protected during the installation process. Step 1: Use a box cutter, a knife or a sharp pair of scissors to cut the tape that seals the top side of the external (second) box.
PAGE 42
LKM Series Console Drawer 3.2.3 Packing List All the console drawers in the LKM series are shipped with the following components: Quantity Item and Part Number 1 LKM Console Drawer 1 1.
PAGE 43
LKM Series Console Drawer If any of these items is missing or damaged, contact the distributor or sales representative immediately. 3.2.4 Optional Accessories The following optional accessories for the LKM series console drawers can be ordered separately: Item and Part Number Image 1.8m Cable Set, Including VGA, Keyboard, Mouse and Audio Cable (P/N: LKM-CB18A-RS) 3.0m Cable Set, Including VGA, Keyboard, Mouse and Audio Cable (P/N: LKM-CB30A-RS) 5.
PAGE 44
LKM Series Console Drawer 3.4 Connectors Table 3-1 lists the rear panel connectors for the LKM series console drawers. Connector Type Audio connector 1 x audio jack Keyboard connector PS/2 connector Mouse connector PS/2 connector Power connector Mini DIN Plug With Lock (Thick Pin, 4 PIN) connector VGA connector HD-D-sub 15 female connector Table 3-1: Rear Panel Connectors 3.4.
PAGE 45
LKM Series Console Drawer 3.4.2 Keyboard Connector Use the rear panel PS/2 keyboard connector to connect the console keyboard to a system.
PAGE 46
LKM Series Console Drawer 3.4.3 Mouse Connector Use the rear panel PS/2 mouse connector to connect the console mouse to a system.
PAGE 47
LKM Series Console Drawer 3.4.4 Power Connector Use the rear panel power connector to connect the console to the power adapter.
PAGE 48
LKM Series Console Drawer 3.4.5 VGA Connector Use the rear panel standard 15-pin female VGA connector to connect the monitor to the system graphics interface.
PAGE 49
LKM Series Console Drawer 3.5 Mounting the LKM Series Console Drawer Each LKM series console drawer is shipped with an installation kit for mounting the drawer into a rack. Refer to the following section for instructions on rack mounting the LKM series console drawer. 3.5.1 Rack Mounting The LKM series console drawer can be mounted to the rack posts of a standard 19” rack cabinet. Make sure that all cabling is correctly attached and carefully routed when installing the LKM series console drawer.
PAGE 50
LKM Series Console Drawer Step 2: Attach one of the rack mounting brackets to the side of the console drawer with either two or four screws as required (see Figure 3-5). Figure 3-5: Attach the Rack Mounting Bracket Step 3: Repeat Step 2 for the other side of the console drawer.
PAGE 51
LKM Series Console Drawer Step 4: Attach an angle bracket to the one of the rack mounting brackets with two screws as shown in Figure 3-6. Figure 3-6: Attach the Angle Bracket Step 5: Repeat Step 4 for the other side of the console drawer. Step 6: With the help of another person, insert the console drawer into a rack and align the slotted holes on the front face of the drawer with the holes in the rack.
PAGE 52
LKM Series Console Drawer Step 7: Insert four screws (two on each side of the drawer’s front face) through the holes in the drawer’s front face and into the rack as seen in Figure 3-7.
PAGE 53
LKM Series Console Drawer Step 8: Insert four screws (two on each side of the drawer) through the holes in the angle mounting bracket and into the rack as seen in Figure 3-8.
PAGE 54
LKM Series Console Drawer 3.6 Cabling Each LKM series console drawer is shipped with a set of cables for connecting a system to the console. Figure 3-9 shows a detail of the cable connections on the LKM series console drawer rear panel. Up to eight systems can be connected to the console drawer with the use of a KVMA switch model. All cable connections to the KVMA switch are similar to those seen in Figure 3-9.
PAGE 55
LKM Series Console Drawer Chapter 4 4 On-Screen-Display and LCD Module Controls Page 41
PAGE 56
LKM Series Console Drawer 4.1 OSD Controls 4.1.1 OSD Buttons There are several on-screen-display (OSD) control buttons on the keyboard tray of the LKM series console drawers (Figure 4-1). Use the Menu/Enter button to initiate the OSD controls menu or to enter adjusted values for OSD options. Use the Left and Right buttons to navigate through the OSD menu structure.
PAGE 57
LKM Series Console Drawer Level 0 Level 1 Brightness and Brightness 0 to 100 Contrast Menu Contrast 0 to 100 Exit Return to Main Menu AutoColor Auto-adjusts the color sRGB Standard RGB mode Color Menu ColorTemp Image Menu Tools Menu Level 2 User Level 3 Value R 0 to 255 G 0 to 255 B 0 to 255 4200k Preset NTSC value 5000k Preset NTSC value 6500k Preset NTSC value 7500k Preset NTSC value 9300k Preset NTSC value Exit Return to Color Menu Exit Return to Main Menu AutoAd
PAGE 58
LKM Series Console Drawer 4.1.3 Brightness and Contrast Menu The Brightness and Contrast menu is shown in Figure 4-2. Figure 4-2: Brightness and Contrast Menu Brightness: o This item sets the brightness of screen, adjusting the offset value of ADC. Setting this value too high or too low will affect the quality of image. Contrast: o This item sets the gain value of ADC. Adjusting this value too high or too low will worsen the quality of image.
PAGE 59
LKM Series Console Drawer 4.1.4 Color Menu The Color menu is shown in Figure 4-3. Figure 4-3: Color Menu The Color menu fine-tunes the palette of color hues for the LCD. AutoColor: o This item automatically adjusts the color. sRGB: o This item sets the color to standard RGB mode. ColorTemp: o This enters the Color Temperature sub-menu (see Section 4.1.4.1). Exit: o This item exits the Color menu.
PAGE 60
LKM Series Console Drawer 4.1.4.1 Color Temperature Sub-Menu The Color Temperature sub-menu is shown in Figure 4-4. Figure 4-4: Color Temperature Sub-Menu User: o This enters the User sub-menu (see Section 4.1.4.2). 4200: o This item sets the display color temperature to NTSC standard 4200K. 5000: o This item sets the display color temperature to NTSC standard 5000K. 6500: o This item sets the display color temperature to NTSC standard 6500K.
PAGE 61
LKM Series Console Drawer 4.1.4.2 User Sub-Menu The User sub-menu is shown in Figure 4-5. Figure 4-5: User Sub-Menu User: o This item adjusts the balance among Red, Green, and Blue color hues if images look garish or unrealistic.
PAGE 62
LKM Series Console Drawer 4.1.5 Image Menu The Image menu is shown in Figure 4-6. Figure 4-6: Image Menu The Image menu adjusts the screen position options. AutoAdjust: o This item automatically adjusts the screen position. Width: o This item adjusts the screen size in the horizontal direction. Clock Phase: o This item adjusts the input signal and dot clock position (Analog only). HPos: o This item adjusts the horizontal position of the display screen.
PAGE 63
LKM Series Console Drawer 4.1.6 Tools Menu The Tools menu is shown in Figure 4-7. Figure 4-7: Tools Menu The Tools menu has the following options: OSD: o This enters the OSD sub-menu (see Section 4.1.6.1). Factory Reset: o This item resets all display values to their factory settings. Sharpness: o This item adjusts the sharpness level to preset values. This option may help reducing the softening edges around displayed objects.
PAGE 64
LKM Series Console Drawer 4.1.6.1 OSD Sub-Menu The OSD sub-menu is shown in Figure 4-8. Figure 4-8: OSD Sub-Menu OSDTimeOut: o This item adjusts how many seconds the OSD screen stays visible before it disappears when OSD is left unattended. OSDHPos: o This item adjusts the horizontal position of the OSD display screen. OSDVPos: o This item adjusts the vertical position of the OSD display screen. Exit: o Page 50 This item exits the OSD sub-menu.
PAGE 65
LKM Series Console Drawer 4.2 LCM Controls (8-Port KVMA Models) The LCM is used to control the display and switching status of systems connected to the console. 4.2.1 LCM Buttons There are three LCD module (LCM) control buttons and one LED (Figure 4-9) on the keyboard tray of the LKM series console drawers that have eight port connectors. Figure 4-9: LCM Control Buttons LED: o This item indicates that the LCD is either in Auto Scan mode or Edit mode.
PAGE 66
LKM Series Console Drawer 4.2.2 LCM Functions The following sections describe the LCM functions. 4.2.2.1 Manually Switching Stations When the LKM series console drawer is initially connected to a power source, "Power On" is displayed on the LCM; afterwards, "Station 001" is displayed indicating that the system connected to station 1 ports is currently active. Use the "UP" and "Down" button to activate control over other stations. The station range is from "station 000" to "station 007". 4.2.2.
PAGE 67
LKM Series Console Drawer Step 6: Press the "AUTO/EDIT" button to select the "C" character. Step 7: Repeat steps 5 and 6 until "ICP ALPHA SERVER" is written on the LCM. Step 8: Press the "AUTO/EDIT" button for more than 3 seconds, or until the blinking cursor disappears from the LCM, to exit edit mode.
PAGE 68
LKM Series Console Drawer THIS PAGE IS INTENTIONALLY LEFT BLANK Page 54
PAGE 69
LKM Series Console Drawer Appendix A A Safety Precautions Page 55
PAGE 70
LKM Series Console Drawer WARNING: The precautions outlined in this chapter should be strictly followed. Failure to follow these precautions may result in permanent damage to the LKM Series console drawer. A.1 Safety Precautions Please follow the safety precautions outlined in the sections that follow: A.1.1 General Safety Precautions Please ensure the following safety precautions are adhered to at all times.
PAGE 71
LKM Series Console Drawer A.1.2 Anti-static Precautions WARNING: Failure to take ESD precautions during the installation of the LKM Series console drawer may result in permanent damage to the LKM Series console drawer and severe injury to the user. Electrostatic discharge (ESD) can cause serious damage to electronic components, including the LKM Series console drawer. Dry climates are especially susceptible to ESD.
PAGE 72
LKM Series Console Drawer A.2 Maintenance and Cleaning Precautions When maintaining or cleaning the LKM Series console drawer, please follow the guidelines below. A.2.1 Maintenance and Cleaning Prior to cleaning any part or component of the LKM Series console drawer, please read the details below. Except for the LCD panel, never spray or squirt liquids directly onto any other components. To clean the LCD panel, gently wipe it with a piece of soft dry cloth or a slightly moistened cloth.
PAGE 73
LKM Series Console Drawer Water or rubbing alcohol – A cloth moistened with water or rubbing alcohol can be used to clean the LKM Series console drawer. Using solvents – The use of solvents is not recommended when cleaning the LKM Series console drawer as they may damage the plastic parts. Vacuum cleaner – Using a vacuum specifically designed for computers is one of the best methods of cleaning the LKM Series console drawer.
PAGE 74
LKM Series Console Drawer THIS PAGE IS INTENTIONALLY LEFT BLANK Page 60
PAGE 75
LKM Series Console Drawer Appendix B B Hazardous Materials Disclosure Page 61
PAGE 76
LKM Series Console Drawer B.1 Hazardous Material Disclosure Table for IPB Products Certified as RoHS Compliant Under 2002/95/EC Without Mercury The details provided in this appendix are to ensure that the product is compliant with the Peoples Republic of China (China) RoHS standards. The table below acknowledges the presences of small quantities of certain materials in the product, and is applicable to China RoHS only.
PAGE 77
LKM Series Console Drawer Part Name Toxic or Hazardous Substances and Elements Lead Mercury Cadmium Hexavalent Polybrominated Polybrominated (Pb) (Hg) (Cd) Chromium Biphenyls Diphenyl Ethers (CR(VI)) (PBB) (PBDE) Housing X O O O O X Display X O O O O X Printed Circuit X O O O O X X O O O O O X O O O O X Fan Assembly X O O O O X Power Supply X O O O O X O O O O O Board Metal Fasteners Cable Assembly Assemblies Battery O: below O This tox
PAGE 78
LKM Series Console Drawer 此附件旨在确保本产品符合中国 RoHS 标准。以下表格标示此产品中某有毒物质的含量符合中国 RoHS 标准规定的限量要求。本产品上会附有”环境友好使用期限”的标签，此期限是估算这些物质”不会有泄漏或突变”的年限。本产品可能包含有较短的环境友好使用期限的可替换元件，像是电池或灯管，这些元件将会单独标示出来。部件名称有毒有害物质或元素铅汞镉六价铬多溴联苯多溴二苯醚 (Pb) (Hg) (Cd) (CR(VI)) (PBB) (PBDE) 壳体 X O O O O X 显示 X O O O O X 印刷电路板 X O O O O X 金属螺帽 X O O O O O 电缆组装 X O O O O X 风扇组装 X O O O O X 电力供应组装 X O O O O X 电池 O O O O O O O: 表示该有毒有害物质在该部件所有物质材料中的含量均在 SJ/T11363-2006 标准规定的限量要求
PAGE 79
LKM Series Console Drawer C Index Page 65
PAGE 80
LKM Series Console Drawer VGA................................................ 33 A anti-static precautions anti-static pad .................................. 57 anti-static wristband ........................ 57 handling........................................... 57 self-grounding ................................. 57 F Features ................................................. 3 H Humidity ............................................. 15 B Backlight MTBF ................................. 14 Benefits .....
PAGE 81
LKM Series Console Drawer P Max. Resolution.................................. 14 Mechanical Overview ................................. 5 LKM-926 Series................................ 5 LKM-935 Series................................ 9 Model Options ...................................... 5 Model Variations........................................ 4 Mounting............................................. 34 O Operation Temperature ....................... 15 Optional Accessories...........................