User Manual

LCD-KIT
Page 46
B.1.2 An ti-static Precautions
WARNING:
Failure t o take ESD precautions during the installation of the LCD-KIT
Series may result in permanent damage to the LCD-KIT Series and
severe injur y to the user.
Electrostatic discharge (ESD) can cause serious damage to electronic components,
including the LCD-KIT Series. Dry climates are especially susceptible to ESD. It is
therefore critical that whenever the LCD-KIT Series is opened and any of the electrical
components are handled, the following anti-static precautions are strictly adhered to.
 Wear an anti-static wristband: Wearing a simple anti-static wristband can
help to prevent ESD from damaging any electrical component.
 Self-grounding: Before handling any electrical component, touch any
grounded conducting material. During the time the electrical component is
handled, frequently touch any conducting materials that are connected to the
ground.
 Use an anti-static pad: When conf iguri ng or working with an electr ic al
component, place it on an antic-static pad. This reduces the possibility of ESD
damage.
 Only handle the edges of the electrical component: When handling the
electrical component, hold the electrical component by its edges.
B.2 Maintena nce and Cleaning Precautions
When maintaining or cleaning the LCD-KIT Series, please follow the guidelines below.
B.2.1 Maintenance and Cleaning
Prior to cleaning any part or component of the LCD-KIT Series, please read the details
below.