LCD-KIT IEI Te c h n o lo g y Co rp . MODEL: LCD-KIT S e rie s 15" ~ 17" Op e n Fra m e LCD Mo n ito r VGA, DVI-D, Ro HS Us e r Ma n u a l Page i Re v. 3.
LCD-KIT Re vis io n Date Version Changes 25 June, 2013 3.
LCD-KIT Co p yrig h t COP YRIGHT NOTICE The information in this document is subject to change without prior notice in order to improve reliability, design and function and does not represent a commitment on the part of the manufacturer. In no event will the manufacturer be liable for direct, indirect, special, incidental, or consequential damages arising out of the use or inability to use the product or documentation, even if advised of the possibility of such damages.
LCD-KIT Ta b le o f Co n te n ts 1 INTRODUCTION.......................................................................................................... 1 1.1 LCD-KIT SERIES LCD MONITOR OVERVIEW ............................................................ 2 1.2 FEATURES ................................................................................................................... 2 1.3 MODEL VARIATIONS ...................................................................................................
LCD-KIT 4.1 AD BOARD OVERVIEW ............................................................................................. 19 4.2 AV-6600 AD BOARD OVERVIEW .............................................................................. 19 4.2.1 AV-6600 Peripheral Interface Connectors ....................................................... 20 4.2.2 AV-6600 Rear Panel Connectors ..................................................................... 20 5 INSTALLATION ............................................
LCD-KIT A CERTIFICATIONS .................................................................................................... 42 A.1 ROHS COMPLIANT .................................................................................................. 43 B SAFETY PRECAUTIONS ......................................................................................... 44 B.1 SAFETY PRECAUTIONS ............................................................................................. 45 B.1.
LCD-KIT Lis t o f Fig u re s Figure 1 1: LCD-KIT Series ............................................................................................................2 Figure 1-2: Typical LCD-KIT Front View .......................................................................................4 Figure 1-3: Typical LCD-KIT Rear View ........................................................................................5 Figure 1-4: Typical LCD-KIT Connectors ..................................................
LCD-KIT Figure C-3: smartOSD Folder Select Screen .............................................................................51 Figure C-4: smartOSD Confirm Installation ...............................................................................52 Figure C-5: smartOSD Installation Progress .............................................................................52 Figure C-6: smartOSD Installation Complete ............................................................................
LCD-KIT Lis t o f Ta b le s Table 1-1: LCD-KIT Series Model Variations ................................................................................3 Table 2-1: General Physical Dimensions ...................................................................................10 Table 2-2: Mounting Holes ...........................................................................................................13 Table 3-1: LCD-KIT150G LCD Specifications .......................................................
LCD-KIT Ch a p te r 1 1 In tro d u c tio n Page 1
LCD-KIT 1.1 LCD-KIT S e rie s LCD Mo n ito r Ove rview Figure 1 1: LCD-KIT Series The LCD-KIT series LCD monitor is the latest member of IEI’s line of sophisticated LCD designs, and it has been improved to be RoHS compliant. It is designed to fit industrial automation, or any other applications that require minimum installation space and flexible configuration. Flexible analog or digital interfaces are provided for ease of connection with a management computer.
LCD-KIT 1.3 Mo d e l Va ria tio n s The LCD-KIT series offers the following model variations. Model Number LCD-KIT150G-R30 LCD-KIT150GM-R30 LCD 9~36V Power 15” LCD-KIT170G-R30 LCD-KIT170GM-R30 Input Yes - 17” Yes Table 1-1: LCD-KIT Series Model Variations 1.
LCD-KIT Figure 1-2: Typical LCD-KIT Front View 1.5.2 Re a r Vie w The rear of the LCD-KIT series LCD monitor is a metal chassis. An on screen display (OSD) control button panel, if present, is located vertically on the left side of the chassis with the following control buttons: LCD On/Off Auto Left Right Menu The OSD panel also has one power LED. Figure 1-3 shows a typical LCD-KIT rear panel.
LCD-KIT Figure 1-3: Typical LCD-KIT Rear View 1.5.3 Co n n e c to rs Each LCD-KIT series LCD monitor has a number of interface connectors on either the top or right panel of the chassis (when viewing the rear panel). Figure 1-4 shows a typical LCD-KIT connector panel. Each model may include or exclude additional connectors. Refer to Section 2.3 for listings of LCD-KITs and their connectors. All connectors are fully described in Section 5.4.
LCD-KIT 1.5.4 AD Bo a rd The LCD-KIT series LCD monitor AD boards provide a wide variety of control interfaces, receiving and managing signals from a CPU card through cabling. Figure 1-5 shows the AV-6600 AD board as a sample of a typical AD board for the LCD-KIT series LCD monitor. Refer to Chapter 4 for a complete description of AD boards and their connectors.
LCD-KIT 1.6 S e rie s Sp e c ific a tio n s The table below shows the LCD-KIT Series specifications. LCD-KIT LCD-KIT150G LCD Type LCD-KIT150GM LCD-KIT170G LCD-KIT170GM 15" TFT 15" TFT 17" TFT 17" TFT 1024 x 768 1024 x 768 1024 x 768 1024 x 768 400 400 350 350 Contrast Ratio 700:1 700:1 800:1 800:1 Display Color 16.2M 16.2M 16.7M 16.7M Pixel Pitch (mm) 0.297 0.297 0.264 0.
LCD-KIT Ch a p te r 2 2 Me c h a n ic a l Ove rvie w Page 8
LCD-KIT 2.1 In tro d u c tio n This chapter describes the general mechanical overview of the LCD-KIT series LCD monitors including rear panel variations, available interfaces and overall dimensions. 2.2 Re a r P a n e l The following models of the LCD-KIT series LCD monitor have an OSD control panel located vertically along the left side of the rear panel: LCD-KIT150G LCD-KIT170G Figure 2-1 shows the location of the rear panel OSD controls. Figure 2-1: Rear Panel 2.
LCD-KIT VGA connector DVI-D connector 12 V DC power connector 9~36 V DC power connector (M model only) 2.4 P h ys ic a l Dim e n s io n s The following sections describe the physical dimensions for each model of the LCD-KIT series LCD monitor. 2.4.1 Ge n e ra l P h ys ic a l Dim e n s io n s General physical dimensions for the LCD-KIT series LCD monitors are shown in Table 2-1. Mo d e l Wid th (m m ) He ig h t (m m ) De p th (m m ) LCD-KIT150G 364.1 262.5 41.9 LCD-KIT170G 390.
LCD-KIT 2.4.2 LCD-KIT150G P h ys ic a l Dim e ns io n s The physical dimensions of the LCD-KIT150G are shown in Figure 2-2.
LCD-KIT 2.4.3 LCD-KIT170G P h ys ic a l Dim e ns io n s The physical dimensions of the LCD-KIT170GS are shown in Figure 2-3.
LCD-KIT 2.5 Mo u n tin g Op tio n s Each LCD-KIT series LCD monitor has mounting holes located on the mounting bracket. Table 2-2 details the number of mounting holes for each model of the LCD-KIT series LCD monitor. Refer to Section 2.4 for more information. Mo d e l No . o f Ro u n d Ho le s - S ize No . o f S lo tte d Ho le s LCD-KIT170G 6 – 4.5 mm diameter 8 LCD-KIT150G 6 – 4.
LCD-KIT Ch a p te r 3 3 LCD S p e c ific a tio n s P a g e 14
LCD-KIT 3.1 LCD Sp e c ific a tio ns 3.1.1 LCD Ove rvie w The LCD-KIT series industrial LCD monitors use the following LCD panels. LCD-KIT150G: AUO G150XG01 V3 LCD-KIT170G: AUO G170EG01 V1 Detailed specifications for the LCD screens are listed in the following sections. 3.1.2 LCD-KIT150G LCD Sp e c ific a tio n s The table below lists the LCD-KIT150G LCD specifications.
LCD-KIT S u p p ly Vo lta g e (V) 3.3 Table 3-1: LCD-KIT150G LCD Specifications 3.1.3 LCD-KIT170G LCD Sp e c ific a tio n s The table below lists the LCD-KIT170G LCD specifications.
LCD-KIT LCD-KIT 150G, 170G Power 60W power adapter Input Voltage Range 90-264VAC Input Frequency 47-63 Hz Input AC Current 1.5A max @ 90vac input & full load Hold Time 8mS minimum. Tested 115 Vac input and max load at output 20mS minimum. Tested 230 Vac input and max load at output Leakage Current At 264 Vac 60Hz, 0.25mA max.
LCD-KIT Ch a p te r 4 4 AD Bo a rd P a g e 18
LCD-KIT 4.1 AD Bo a rd Ove rvie w The LCD-KIT series industrial LCD monitor AD board provides a wide variety of control interfaces, receiving and managing interface signals from a CPU card through cabling. The following sections describe the AD board in detail. 4.2 AV-6600 AD Bo a rd Ove rview The AV-6600 AD board provides a wide variety of control interfaces, receiving and managing interface signals from a CPU card through cabling. The following sections describe the AV-6600 AD board in detail.
LCD-KIT 4.2.1 AV-6600 P e rip he ra l Inte rfa c e Co n n e c to rs Table 4-1 shows a list of the peripheral interface connectors on the AV-6600 AD board.
LCD-KIT Ch a p te r 5 5 In s ta lla tio n P a g e 21
LCD-KIT 5.1 In s ta lla tio n P re c a u tio n s When installing the LCD-KIT series LCD monitor, please follow the precautions listed below: Read the user manual: The user manual provides a complete description of the LCD-KIT series LCD monitor, installation instructions and configuration options. DANGER! Disconnect Power: Power to the LCD monitor must be disconnected when installing the LCD-KIT series LCD monitor, or before any attempt is made to access the rear panel.
LCD-KIT 5.2 Un pa c kin g 5.2.1 P a c ka g in g When shipped, the LCD-KIT series LCD monitor is wrapped in a plastic bag. Two polystyrene ends are placed on either side of the monitor. The monitor is then placed into a first (internal) cardboard box. This box is then sealed and placed into a second (external) cardboard box. The second box is also sealed. A bag containing accessory items is placed with the monitor in the internal (first) box. 5.2.
LCD-KIT 5.2.3 P a c kin g Lis t All the monitors in the LCD-KIT series are shipped with the following components: 1 x LCD-KIT series LCD monitor. 1 x AC Power cable 1 x VGA Cable 1 x 60W Power Adapter 5 x Replacement Round Head Screw 5 x Replacement Flat Head Screw 5 x Replacement Wire Strain Band 1 x Utility CD If any of these items are missing or damaged, contact the distributor or sales representative immediately. 5.3 P re -in s ta lla tio n P re pa ra tio n 5.3.
LCD-KIT 5.4 Co n n e c to rs Table 5-1 lists the rear panel connectors for the LCD-KIT series LCD monitors. LCD-KIT 150G 150GM 170G 170GM DVI-D Yes Yes Yes Yes VGA Yes Yes Yes Yes Power (12V Jack) Yes Yes Yes Yes - Yes - Yes Power (9~36V Terminal Block) (Optional for M model) Table 5-1: Rear Panel Connectors 5.4.1 VGA Co n n e c to r Use the rear panel standard 15-pin female VGA connector to connect the LCD monitor to the system graphics interface.
LCD-KIT Pin Description Pin Description Pin Description 1 TMDS Data2- 9 TMDS Data1- 17 TMDS Data0- 2 TMDS Data2+ 10 TMDS Data1+ 18 TMDSData0+ 3 TMDS Data2/4 Shield 11 TMDS Data1/3 Shield 19 TMDS Data0/5 Shield 4 TMDS Data4- 12 TMDS Data3- 20 TMDS Data5- 5 TMDS Data4+ 13 TMDS Data3+ 21 TMDS Data5+ 6 DDC Clock [SCL] 14 +5 V Power 22 TMDS Clock Shield 7 DDC Data [SDA] 15 Ground (for +5 V) 23 TMDS Clock + 8 Analog vertical sync 16 Hot Plug Detect 24 TMDS Clo
LCD-KIT Figure 5-4: Terminal Block 5.5 Mo u n tin g th e LCD-KIT S e rie s LCD Mo n ito r Each LCD-KIT series LCD monitor comes with a preinstalled mounting bracket with a number of holes available for mounting purposes that system integrators will find especially useful. Refer to Sections 2.4 and 2.5 for further details on the number and location of mounting holes for each model of the LCD-KIT series LCD monitor.
LCD-KIT Ch a p te r 6 6 OS D Co n tro ls P a g e 28
LCD-KIT 6.1 Us e r Mo d e OS D Stru c tu re 6.1.1 OS D Bu tto n s There are several on-screen-display (OSD) control buttons oriented vertically along the left side of the monitor rear panel. Figure 6-1 shows a typical arrangement of OSD controls of the LCD-KIT series LCD monitor. Figure 6-1: OSD Control Buttons 6.1.2 OS D Me n u Stru c tu re Table 6-1 shows the OSD menu structure for all models of the SRM series LCD monitor.
LCD-KIT Color Menu OSD Menu Exit Menu Clock 0 to 100 Phase 0 to 100 H. Position 0 to 100 V.
LCD-KIT Figure 6-2: Main Display Features The brightness option adjusts the brightness of screen. This function Brightness adjusts the offset value of ADC. Setting this value too high or too low will affect the quality of image. When the auto- dimming function is turned on, the brightness control is not effective. Contrast This function adjusts the gain value of ADC. Adjusting this value too high or too low will worsen the quality of image. Clock Adjusts the width of the display screen.
LCD-KIT Figure 6-3: Color Options The Color menu fine-tunes the palette of color hues for the LCD. 6500k NTSC standard Kelvin 7500k NTSC standard Kelvin 9300k NTSC standard Kelvin User P a g e 32 This item allows fine-tuning the balance among Red, Green, and Blue color hues if images look garish or unrealistic.
LCD-KIT 6.2.3 OS D Co n fig u ra tio n s The OSD configurations are shown in Figure 6-4. Figure 6-4: OSD Configurations Menu OSD Configurations are described below. OSD Time Out Determines how many seconds the OSD screen stays on screen before it disappears when OSD is left unattended. Adjusts the OSD position on the screen. Position 1 is in the upper left OSD Position of the screen, position 2 in the upper right and position 3 in the center.
LCD-KIT Ch a p te r 7 7 S o ftwa re Drive r P a g e 34
LCD-KIT 7.1 In tro d u c tio n The touch panel controller enables analog resistive touch panels for four-wire, five-wire & eight-wire models. The controller directly communicates with the PC system through the touch panel communications interface. The controller design is superior in sensitivity, accuracy, and friendly operation. The touch panel driver emulates the left mouse button and the right mouse button functions.
LCD-KIT USB Interface: If the touch screen interface connection is a USB connection, connect the USB connector on the single board computer to the external USB port connector of the LCD-KIT monitor. 7.3 To u c h P a n e l Drive r In s ta lla tio n WARNING: Before the touch screen driver is installed, make sure the system is connected to the monitor with a USB cable or an RS-232 null cable. Also, make sure the VGA connector on the system is connected to the VGA connector on the bottom of the monitor.
LCD-KIT S te p 4: Double click the setup icon in Figure 7-1. S te p 5: The Welcome screen in Figure 7-2 appears. Figure 7-2: Welcome Screen S te p 6: Click Next to continue. S te p 7: The license agreement in Figure 7-3 appears. Accept the terms of the agreement by clicking I Agree.
LCD-KIT S te p 8: The installation destination screen appears. See Figure 7-4. Click Install. Figure 7-4: Initiate Install S te p 9: The installation of the program begins. See Figure 7-5. Figure 7-5: Installation Starts S te p 10: When the installation is complete, the complete screen appears. See Figure 7-6. To complete the installation process click Finish.
LCD-KIT Figure 7-6: Finish Installation 7.4 Ch a n g e th e To u c h S c re e n In te rfa c e If the touch screen interface must be changed from an RS-232 interface to a USB interface or, from a USB interface to an RS-232 interface, the following steps must be followed. S te p 1: Uninstall the touch screen driver S te p 2: Remove the interface cable i.e. remove the RS-232 cable or the USB cable S te p 3: Install the new cable i.e. install the USB cable or the RS-232 cable.
LCD-KIT S te p 3: Locate the PenMount Monitor icon in the bottom left corner of the screen. Figure 7-7: PenMount Monitor Icon S te p 4: Click the icon. A pop up menu appears. See Figure 7-8. Figure 7-8: PenMount Monitor Popup Menu S te p 5: Click Control Panel in the pop up menu shown in Figure 7-8. S te p 6: The configuration screen in Figure 7-9 appears.
LCD-KIT S te p 7: Double click the PenMount 6000 icon as shown in Figure 7-9. S te p 8: The calibration initiation screen in Figure 7-10 appears. S te p 9: Select the Standard Calibration button as shown in Figure 7-10. Figure 7-10: Calibration Initiation Screen S te p 10: The calibration screen in is shown. See Figure 7-11. Figure 7-11: Calibration Screen S te p 11: Follow the instructions. The user is asked touch the screen at five specified points after which the screen is calibrated.
LCD-KIT Ap p e n d ix A A Ce rtific a tio n s P a g e 42
LCD-KIT A.1 Ro HS Co m p lia n t All models in the LCD-KIT series comply with the Restriction of Hazardous Materials (RoHS) Directive. This means that all components used to build the industrial workstations and the workstation itself are RoHS compliant.
LCD-KIT Ap p e n d ix B B S a fe ty P re c a u tio n s P a g e 44
LCD-KIT WARNING: The precautions outlined in this chapter should be strictly followed. Failure to follow these precautions may result in permanent damage to the LCD-KIT Series. B.1 S a fe ty P re c a u tio n s Please follow the safety precautions outlined in the sections that follow: B.1.1 Ge n e ra l S a fe ty P re c a u tio n s Please ensure the following safety precautions are adhered to at all times. Follow the electrostatic precautions outlined below whenever the LCD-KIT Series is opened.
LCD-KIT B.1.2 An ti-s ta tic P re c a u tio n s WARNING: Failure to take ESD precautions during the installation of the LCD-KIT Series may result in permanent damage to the LCD-KIT Series and severe injury to the user. Electrostatic discharge (ESD) can cause serious damage to electronic components, including the LCD-KIT Series. Dry climates are especially susceptible to ESD.
LCD-KIT Except for the LCD panel, never spray or squirt liquids directly onto any other components. To clean the LCD panel, gently wipe it with a piece of soft dry cloth or a slightly moistened cloth. The interior of the LCD-KIT Series does not require cleaning. Keep fluids away from the LCD-KIT Series interior. Be cautious of all small removable components when vacuuming the LCD-KIT Series. Turn the LCD-KIT Series off before cleaning the LCD-KIT Series.
LCD-KIT Ap p e n d ix C C s m a rtOS D P a g e 48
LCD-KIT C.1 IEI s m a rtOS D Qu ic k In s ta lla tio n Gu id e IEI smartOSD is a proprietary On-Screen-Display (OSD) software solution from IEI that enables easy, remote monitor setting adjustments in a Windows environment. IEI smartOSD delivers excellent performance and provides more flexibility than the typical OSD hardware solutions when adjusting a monitor.
LCD-KIT C.3 s m a rtOS D In s ta ll Connect the LCD-KIT to a host computer. Insert the CD that came with the system and follow the instructions below. S te p 1: When the CD installs the screen shown in Figure C-1 appears. Figure C-1: smartOSD Installer S te p 2: Click “Smart OSD” in Figure C-1. S te p 3: The welcome screen shown in Figure C-2 appears.
LCD-KIT Figure C-2: smartOSD Welcome Screen S te p 4: Click Next to continue. S te p 5: The Folder Select screen in Figure C-3 appears. Figure C-3: smartOSD Folder Select Screen S te p 6: Select the installation folder in Figure C-3 shown above. S te p 7: Click Next to continue. S te p 8: The screen in Figure C-4 appears.
LCD-KIT Figure C-4: smartOSD Confirm Installation S te p 9: Confirm the installation by clicking Next in the screen above. S te p 10: The program starts to install and the progress bar shown in Figure C-5 appears. Figure C-5: smartOSD Installation Progress S te p 11: When the installation is complete the “Complete Installation” screen in Figure C-6 appears.
LCD-KIT Figure C-6: smartOSD Installation Complete S te p 12: Click Close in the screen above. S te p 13: After quick setup is complete, the IEI smartOSD wizard logo appears on the desktop as shown in the screen below. S te p 14: To access the smartOSD, click the smartOSD wizard logo.
LCD-KIT C.4 S o ftwa re Illu s tra tio n The table below shows the smartOSD menu structure for all IEI LCD monitors. NOTE: To update the display setting status immediately, push the refresh button on every page To turn the system on, press ALT + P. Ite m Ele m e n ts Ma n a g e m e n t Save/Load File Power Management EDID EDID contains basic information about the monitor and its capabilities.
LCD-KIT Ite m Ele m e n ts PIP Source Input (disabled in the LCD-KIT Series) PIP Size (disabled in the LCD-KIT Series) S ys te m Monitor Power Control Auto Brightness (disabled in the LCD-KIT Series) Main Source Input (S-Video and CVBS disabled) Volume (disabled in the LCD-KIT Series) Factory Presets/OSD Lock/OSD Unlock Mute (disabled in the LCD-KIT Series) Table C-1: SmartOSD Menu Structure P a g e 55
LCD-KIT C.4.
LCD-KIT C.4.
LCD-KIT C.4.
LCD-KIT C.4.
LCD-KIT C.4.
LCD-KIT C.4.6 P IP P a ge NOTE: The functions in the PIP page are only available in the MLCD-KIT Series and AFOLUX Series monitors.
LCD-KIT C.4.
LCD-KIT NOTE: Some of the functions in the System Page are only available to some of the IEI LCD series as following: Auto Brightness: SRM, MLCD-KIT and AFOLUX series only Main Source Input: MLCD-KIT and AFOLUX series only Volume: AFOLUX series only Mute: AFOLUX series only P a g e 63
LCD-KIT C.4.
LCD-KIT C.5 s m a rtOS D FAQ For troubleshooting, please see the steps below: C.5.1 Win d ows 2000 In s ta lla tio n Fa ilu re Installation fails under Windows 2000 and shows the following image: Figure C-16: DLL Missing Solution: Download and install service pack Windows Installer 3.
LCD-KIT C.5.2 Vis ta In s ta lla tio n Fa ilu re Installation fails under Vista while showing following image: Figure C-17: Windows Vista Error Solution: Install SmartOSD.
LCD-KIT C.5.3 Mo d e l Fa ilu re The Model Fail error message shown below appears. Figure C-19: Firmware Incompatibility Solution: SmartOSD only supports firmware version 2.0 and following versions. C.5.4 DDC P o rt Fa ilu re The DDC port fail error message shown below appears. Figure C-20: DCC Port Failure Solutions: Check VGA or DVI cable Check an IEI monitor is being used Make sure the version is version 2.3 for the AFOLUX/MLCD-KIT series and version 1.
