User guide
Table Of Contents
- 1 Introduction
- 2 Mechanical Overview
- 3 LCD Specifications
- 3.1 LCD Specifications
- 3.1.1 LCD Overview
- 3.1.2 LCD-KIT190G LCD Specifications
- 3.1.3 LCD-KIT170G LCD Specifications
- 3.1.4 LCD-KIT150G LCD Specifications
- 3.1.5 LCD-KIT121GX LCD Specifications
- 3.1.6 LCD-KIT121G LCD Specifications
- 3.1.7 LCD-KIT104GH LCD Specifications
- 3.1.8 LCD-KIT84GH LCD Specifications
- 3.1.9 LCD-KIT65GH LCD Specifications
- 3.2 Power Adapters
- 3.1 LCD Specifications
- 4 AD Boards
- 5 Installation
- 6 OSD Controls
- A Certifications
- B Safety Precautions
- C smartOSD
LCD-KIT
Page 12
2.3 Connector Panel
All external peripheral interface connectors are located on the rear panel of the LCD-KIT
series monitor. The following sections describe the rear panel variants and their
associated connectors.
2.3.1 Available Connectors
There are a number of rear panel peripheral device connectors available for the LCD-KIT
series monitor.
VGA connector
DVI-D connector
12 V DC power connector
9~36 V DC power connector
2.3.2 Variant 1 Connectors
The following is a list of the bottom panel peripheral device connectors used on the
LCD-KIT65GH, LCD-KIT84GH and LCD-KIT104GH series monitor.
VGA connector
12 V DC power connector
2.3.3 Variant 2 Connectors
The following is a list of the bottom panel peripheral device connectors used on the
LCD-KIT121GX, LCD-KIT150G, LCD-KIT170GS and LCD-KIT190G series monitor.
VGA connector
DVI-D connector
12 V DC power connector
2.3.4 Variant 3 Connectors
The following is a list of the bottom panel peripheral device connectors used on the
LCD-KIT84GHM and LCD-KIT104GHM series monitor.
VGA connector