Instruction Manual
KINO-QM670 Mini-ITX SBC
Page 82
Î SATA Controller(s) [Enabled]
Use the SATA Controller(s) option to enable or disable the use of SATA Devices.
Î
Enabled DEFAULT
Enables SATA devices.
Î
Disabled
Disables SATA devices.
Î SATA Mode Selection [AHCI]
Use the SATA Mode option to configure SATA devices as normal IDE devices.
Î
IDE
Configures SATA devices as normal IDE device.
Î
AHCI DEFAULT
Configures SATA devices as AHCI device.
Î
RAID
Configures SATA devices as RAID device.
5.3.5 USB Configuration
Use the USB Configuration menu (BIOS Menu 7) to read USB configuration information
and configure the USB settings.
Aptio Setup Utility – Copyright (C) 2010 American Megatrends, Inc.
Advanced
USB Configuration
USB Devices:
1 Keyboard, 2 Hubs
USB Support [Enabled]
Legacy USB Support [Enabled]
USB Support Parameters
---------------------
ÅÆ
: Select Screen
↑ ↓: Select Item
Enter Select
+/-: Change Opt.
F1: General Help
F2: Previous Values
F3: Optimized Defaults
F4: Save & Exit
ESC: Exit
Version 2.10.1208. Copyright (C) 2010 American Megatrends, Inc.
BIOS Menu 7: USB Configuration
Î USB Devices
The USB Devices Enabled field lists the USB devices that are enabled on the system