Owner's manual

KINO-QM670 Mini-ITX SBC
Page 82
Î
IDE
Configures SATA devices as normal IDE device.
Î
AHCI DEFAULT
Configures SATA devices as AHCI device.
Î
RAID
Configures SATA devices as RAID device.
5.3.5 USB Configuration
Use the USB Configuration menu (BIOS Menu 7) to read USB configuration information
and configure the USB settings.
Aptio Setup Utility – Copyright (C) 2010 American Megatrends, Inc.
Advanced
USB Configuration
USB Devices:
1 Keyboard, 2 Hubs
USB Support [Enabled]
Legacy USB Support [Enabled]
USB Support Parameters
---------------------
ÅÆ : Select Screen
↑ ↓: Select Item
Enter Select
+/-: Change Opt.
F1: General Help
F2: Previous Values
F3: Optimized Defaults
F4: Save & Exit
ESC: Exit
Version 2.10.1208. Copyright (C) 2010 American Megatrends, Inc.
BIOS Menu 7: USB Configuration
Î USB Devices
The USB Devices Enabled field lists the USB devices that are enabled on the system
Î USB Support [Enabled]
Use the USB Support option to enable or disable USB support on the system.
Î
Disabled
USB support disabled
Î
Enabled DEFAULT
USB support enabled