Manual

KINO-PVN-D5251/D4251/ Mini ITX SBC
Page 42
4.5 CompactFlash® Installation
NOTE:
Both CompactFlash® Type I and Type II cards are supported.
To install the CompactFlash® card, please follow the steps below.
Step 1: Locate the CF card socket. Locate the CompactFlash® slot.
Step 2: Align the CF card. Align the CompactFlash® card. The label side should be
facing away from the board. The grooves on the CompactFlash® slot ensure
that the card cannot be inserted the wrong way.
Step 3: Insert the CF card. Push until the CompactFlash® card is firmly seated in the
slot. See Figure 4-3. Step 0:
Figure 4-3: CompactFlash® Card Installation