Manual

KINO-PVN-D5251/D4251/ Mini ITX SBC
Page 41
4.4.1 SO-DIMM Installation
To install a SO-DIMM, please follow the steps below and refer to Figure 4-1.
Figure 4-1: SO-DIMM Installation
Step 1: Locate the SO-DIMM socket on the board (See the figure below). Place the
board on an anti-static mat.
Figure
ٛ 4-2: SO-DIMM Connector Location
Step 2: Align the SO-DIMM with the socket. Align the notch on the memory with the
notch on the memory socket.
Step 3: Insert the SO-DIMM. Push the memory in at a 20º angle. (See Figure 4-1)
Step 4: Seat th
e SO-DIMM. Gently push downwards and the arms clip into place. (See
Figure 4-1) Step 0: