User guide

Page 50
K INO-PV-D5253-D4253 Mini-ITX Motherboard
Figure 4-10: Serial Device Connector
Secure the connector. Secure the serial device connector to the external interface by
tightening the two retention screws on either side of the connector.
4.6.4 USB Device Connection
The external USB Series "A" receptacle connectors provide easier and quicker access to
external USB devices. Follow the steps below to connect USB devices to the
KINO-PV-D5253/D4253.
Locate the USB Series "A" receptacle connectors. The location of the USB Series "A"
receptacle connectors are shown in Chapter 3.
Insert a USB Series "A" plug. Insert the USB Series "A" plug of a device into the USB
Series "A" receptacle on the external peripheral interface. See Figure 4-11.