User Manual

KINO-PV-D5252/D4252 Mini ITX SBC
Page 87
 Change Settings [Auto]
Use the Change Settings option to change the parallel port IO port address and interrupt
address.

Auto DEFAULT
The parallel port IO port address and interrupt
address are automatically detected.

IO=378h;
IRQ=7
Parallel Port I/O port address is 378h and the
interrupt address is IRQ7

IO=378h;
IRQ=7
Parallel Port I/O port address is 378h and the
interrupt address is IRQ7

IO=278h;
IRQ=7
Parallel Port I/O port address is 278h and the
interrupt address is IRQ7

IO=3BCh
IRQ=7
Parallel Port I/O port address is 3BCh and the
interrupt address is IRQ7
 Device Mode [Printer Mode]
Use the Device Mode option to select the mode the parallel port operates in.
Configuration options are listed below.
 Printer Mode Default
 SPP Mode
 EPP-1.9 and SPP Mode
 EPP-1.7 and SPP Mode
 ECP Mode
 ECP and EPP 1.9 Mode
 ECP and EPP 1.7 Mode