User Manual

ManualsBrandsIEI Integration ManualsHardwareKINO-PV-D4252_D5252

KINO-PV-D5252/D4252 Mini ITX SBC

Page i

IEI Technology Corp.

User Manual

KINO-PV-D5252/D4252

Mini ITX SBC with Intel® Atom™ processor D425/D525, DDR3

VGA, Dual LVDS, Dual GbE LAN, USB 2.0, SATA 3Gb/s, RoHS

MODEL:

Rev. 1.02 – 17 January, 2012

Summary of content (163 pages)

PAGE 1
KINO-PV-D5252/D4252 Mini ITX SBC IEI Technology Corp. MODEL: KINO-PV-D5252/D4252 Mini ITX SBC with Intel® Atom™ processor D425/D525, DDR3 VGA, Dual LVDS, Dual GbE LAN, USB 2.0, SATA 3Gb/s, RoHS User Manual Page i Rev. 1.
PAGE 2
KINO-PV-D5252/D4252 Mini ITX SBC Revision Date Version Changes 17 January, 2012 1.02 Minor update to Figure 1.4 Data flow Block Diagram Minor update to Figure 3-1: Connector and Jumper Locations Updated Table D-1 Digital I/O Connector Pinouts 17 June, 2011 1.01 Added KEY1 connector. Minor update to J_VLVDS1 and J_VLVDS2 jumper settings. 24 March, 2011 Page ii 1.
PAGE 3
KINO-PV-D5252/D4252 Mini ITX SBC Copyright COPYRIGHT NOTICE The information in this document is subject to change without prior notice in order to improve reliability, design and function and does not represent a commitment on the part of the manufacturer. In no event will the manufacturer be liable for direct, indirect, special, incidental, or consequential damages arising out of the use or inability to use the product or documentation, even if advised of the possibility of such damages.
PAGE 4
KINO-PV-D5252/D4252 Mini ITX SBC Table of Contents 1 INTRODUCTION.......................................................................................................... 1 1.1 INTRODUCTION........................................................................................................... 2 1.2 CONNECTORS ............................................................................................................. 3 1.3 DIMENSIONS .....................................................................
PAGE 5
KINO-PV-D5252/D4252 Mini ITX SBC 3.2.13 LVDS2 Connector .......................................................................................... 28 3.2.14 LVDS2 Backlight Inverter Connector ............................................................ 29 3.2.15 Parallel Port Connector ................................................................................ 29 3.2.16 PCIe Mini Card Slot ...................................................................................... 31 3.2.
PAGE 6
KINO-PV-D5252/D4252 Mini ITX SBC 4.7 CHASSIS INSTALLATION ............................................................................................ 60 4.7.1 Airflow.............................................................................................................. 60 4.7.2 Motherboard Installation................................................................................. 60 4.8 INTERNAL PERIPHERAL DEVICE CONNECTIONS ........................................................ 61 4.8.
PAGE 7
KINO-PV-D5252/D4252 Mini ITX SBC 5.3.9 Serial Port Console Redirection ...................................................................... 92 5.4 CHIPSET ................................................................................................................... 93 5.4.1 Host Bridge Configuration .............................................................................. 94 5.4.1.1 Memory Frequency and Timing................................................................ 95 5.4.1.
PAGE 8
KINO-PV-D5252/D4252 Mini ITX SBC D.2 DIO CONNECTOR PINOUTS ................................................................................... 141 D.3 ASSEMBLY LANGUAGE SAMPLES........................................................................... 142 D.3.1 Enable the DIO Input Function .................................................................... 142 D.3.2 Enable the DIO Output Function.................................................................. 142 E WATCHDOG TIMER........................
PAGE 9
KINO-PV-D5252/D4252 Mini ITX SBC List of Figures Figure 1-1: KINO-PV-D5252/D4252................................................................................................2 Figure 1-2: Connectors ..................................................................................................................3 Figure 1-3: KINO-PV-D5252/D4252 Dimensions (mm) ................................................................4 Figure 1-4: Data Flow Block Diagram ............................................
PAGE 10
KINO-PV-D5252/D4252 Mini ITX SBC Figure 3-27: RJ-45 Ethernet Connector......................................................................................41 Figure 3-28: VGA Connector .......................................................................................................43 Figure 4-1: SO-DIMM Installation ................................................................................................49 Figure4-2: SO-DIMM Connector Location ..................................................
PAGE 11
KINO-PV-D5252/D4252 Mini ITX SBC Figure B-13: Symantec Ghost Path ......................................................................................... 120 Figure B-14: Select a Local Source Drive ............................................................................... 121 Figure B-15: Select a Source Partition from Basic Drive ...................................................... 121 Figure B-16: File Name to Copy Image to ........................................................................
PAGE 12
KINO-PV-D5252/D4252 Mini ITX SBC List of Tables Table 1-1: Technical Specifications..............................................................................................7 Table 3-1: Peripheral Interface Connectors ...............................................................................15 Table 3-2: Rear Panel Connectors ..............................................................................................15 Table 3-3: 12 V Power Connector Pinouts .....................................
PAGE 13
KINO-PV-D5252/D4252 Mini ITX SBC Table 3-30: Serial Port Pinouts....................................................................................................43 Table 3-31: VGA Connector Pinouts...........................................................................................44 Table 4-1: Jumpers .......................................................................................................................52 Table 4-2: AT/ATX Power Select Jumper Settings ..............................
PAGE 14
KINO-PV-D5252/D4252 Mini ITX SBC BIOS Menus BIOS Menu 1: Main .......................................................................................................................75 BIOS Menu 2: Advanced ..............................................................................................................76 BIOS Menu 3: ACPI Settings .......................................................................................................77 BIOS Menu 4: TPM Configuration ............................
PAGE 15
KINO-PV-D5252/D4252 Mini ITX SBC Chapter 1 1 Introduction Page 1
PAGE 16
KINO-PV-D5252/D4252 Mini ITX SBC 1.1 Introduction Figure 1-1: KINO-PV-D5252/D4252 The KINO-PV-D5252/D4252 Mini ITX motherboard is an Intel® Atom™ processor D525 or D425 platform. Up to two 4.0 GB 800 MHz DDR3 SDRAM SO-DIMMs are supported by the KINO-PV-D5252/D4252. The integrated Intel® ICH8M Chipset supports two GbE LAN ports through two Realtek RTL8111E Ethernet controllers (with ASF 2.0 support on LAN1). The KINO-PV-D5252/D4252 also supports two SATA 3Gb/s drives and provides 5 V SATA power.
PAGE 17
KINO-PV-D5252/D4252 Mini ITX SBC 1.2 Connectors The connectors on the KINO-PV-D5252/D4252 are shown in the figure below.
PAGE 18
KINO-PV-D5252/D4252 Mini ITX SBC 1.
PAGE 19
KINO-PV-D5252/D4252 Mini ITX SBC 1.4 Data Flow Figure 1-4 shows the data flow between the two on-board chipsets and other components 749H installed on the motherboard and described in the following sections of this chapter.
PAGE 20
KINO-PV-D5252/D4252 Mini ITX SBC 1.5 Technical Specifications KINO-PV-D5252/D4252 technical specifications are listed in table below. Specification KINO-PV-D5252/D4252 Form Factor Mini ITX CPU Options Intel® Atom™ processor D525, 1.8 GHz/1MB L2 cache Intel® Atom™ processor D425, 1.8 GHz/512KB L2 cache Express Chipset Intel® ICH8M Graphics Engine GMA 3150 Memory Two 204-pin SO-DIMM sockets support 800 MHz 4.0 GB (max.
PAGE 21
KINO-PV-D5252/D4252 Mini ITX SBC Specification KINO-PV-D5252/D4252 Ethernet Two RJ-45 GbE ports by Realtek RTL8111E with ASF 2.0 support on LAN1 Serial Ports Three RS-232 via Rear I/O Two RS-232 via four 10-pin headers One RS-232/422/485 via 14–pin header USB 2.0/1.1 Ports Four external USB ports Four internal USB ports via 8-pin headers Parallel Ports One LPT connector via 26-pin header TPM INFINEON SLB9635TT1.2 (Optional) Storage Serial ATA Two SATA 3.
PAGE 22
KINO-PV-D5252/D4252 Mini ITX SBC Chapter 2 2 Unpacking Page 8
PAGE 23
KINO-PV-D5252/D4252 Mini ITX SBC 2.1 Anti-static Precautions WARNING! Static electricity can destroy certain electronics. Make sure to follow the ESD precautions to prevent damage to the product, and injury to the user. Make sure to adhere to the following guidelines:  Wear an anti-static wristband: Wearing an anti-static wristband can prevent electrostatic discharge.  Self-grounding: Touch a grounded conductor every few minutes to discharge any excess static buildup.
PAGE 24
KINO-PV-D5252/D4252 Mini ITX SBC 2.3 Packing List NOTE: If any of the components listed in the checklist below are missing, do not proceed with the installation. Contact the IEI reseller or vendor the KINO-PV-D5252/D4252 was purchased from or contact an IEI sales representative directly by sending an email to sales@iei.com.tw.
PAGE 25
KINO-PV-D5252/D4252 Mini ITX SBC 1 Quick Installation Guide 2.3.
PAGE 26
KINO-PV-D5252/D4252 Mini ITX SBC Chapter 3 3 Connectors Page 12
PAGE 27
KINO-PV-D5252/D4252 Mini ITX SBC 3.1 Peripheral Interface Connectors This chapter details all the jumpers and connectors. 3.1.1 KINO-PV-D5252/D4252 Layout 768H The figures below show all the connectors and jumpers.
PAGE 28
KINO-PV-D5252/D4252 Mini ITX SBC 3.1.2 Peripheral Interface Connectors The table below lists all the connectors on the board.
PAGE 29
KINO-PV-D5252/D4252 Mini ITX SBC Connector Type Label USB connector 8-pin header USB1, USB2 Table 3-1: Peripheral Interface Connectors 3.1.3 External Interface Panel Connectors The table below lists the connectors on the external I/O panel.
PAGE 30
KINO-PV-D5252/D4252 Mini ITX SBC Figure 3-2: 12 V Power Connector Location Pin Description Pin Description 1 GND 2 GND 3 +12V 4 +12V Table 3-3: 12 V Power Connector Pinouts 3.2.2 Battery Connector CN Label: BAT1 CN Type: 2-pin wafer CN Location: See Figure 3-3 CN Pinouts: See Table 3-4 This is connected to the system battery. The battery provides power to the system clock to retain the time when power is turned off.
PAGE 31
KINO-PV-D5252/D4252 Mini ITX SBC Figure 3-3: Battery Connector Location Pin Description 1 VCC_BAT 3 GND Table 3-4: Battery Connector Pinouts 3.2.3 CompactFlash® Slot CN Label: CF1 CN Type: CompactFlash® card slot CN Location: See Figure 3-4 CN Pinouts: See Table 3-5 A CompactFlash® Type I/II card can be used in this slot.
PAGE 32
KINO-PV-D5252/D4252 Mini ITX SBC Figure 3-4: CompactFlash® Slot Location Pin Description Pin Description 1 GND 26 CD1# 2 D3 27 D11 3 D4 28 D12 4 D5 29 D13 5 D6 30 D14 6 D7 31 D15 7 CE# 32 CE2# 8 A10 33 VS1# 9 OE# 34 IOR# 10 A9 35 IOW# 11 A8 36 WE# 12 A7 37 IRQ 13 VCC 38 VCC 14 A6 39 CSEL# 15 A5 40 VS2# 16 A4 41 RESET# Page 18
PAGE 33
KINO-PV-D5252/D4252 Mini ITX SBC Pin Description Pin Description 17 A3 42 WAIT# 18 A2 43 INPACK# 19 A1 44 REG# 20 A0 45 BVD2 21 D0 46 BVD1 22 D1 47 D8 23 D2 48 D9 24 IOCS16# 49 D10 25 CD2# 50 GND2 Table 3-5: CompactFlash® Slot Pinouts 3.2.4 Digital I/O Connector CN Label: DIO1 CN Type: 10-pin header CN Location: See Figure 3-5 CN Pinouts: See Table 3-6 The digital I/O connector provides programmable input and output for external devices.
PAGE 34
KINO-PV-D5252/D4252 Mini ITX SBC Pin Description Pin Description 1 Ground 2 VCC5 3 Output 3 4 Output 2 5 Output 1 6 Output 0 7 Input 3 8 Input 2 9 Input 1 10 Input 0 Table 3-6: Digital I/O Connector Pinouts 3.2.5 Fan Connector (CPU) CN Label: CPU_FAN1 CN Type: 4-pin wafer CN Location: See Figure 3-6 CN Pinouts: See Table 3-7 The fan connector attaches to a CPU cooling fan.
PAGE 35
KINO-PV-D5252/D4252 Mini ITX SBC Pin Description 1 GND 2 VCC12 3 FANIN1 4 FANOUT1 Table 3-7: CPU Fan Connector Pinouts 3.2.6 Fan Connector CN Label: J4 CN Type: 3-pin header CN Location: See Figure 3-7 CN Pinouts: See Table 3-8 The fan connector attaches to a cooling fan.
PAGE 36
KINO-PV-D5252/D4252 Mini ITX SBC Pin Description 2 +12V (PWM) 3 GND Table 3-8: Fan Connector Pinouts 3.2.7 Flash SPI ROM CN Label: SPI1 CN Type: 8-pin header CN Location: See Figure 3-8 CN Pinouts: See Table 3-9 The connector provides a Flash SPI BIOS update.
PAGE 37
KINO-PV-D5252/D4252 Mini ITX SBC 3.2.8 Front Panel Connector CN Label: F_PANEL1 CN Type: 8-pin header (2x4) CN Location: See Figure 3-9 CN Pinouts: See Table 3-10 The front panel connector connects to external switches and indicators to monitor and controls the motherboard.
PAGE 38
KINO-PV-D5252/D4252 Mini ITX SBC 3.2.9 Keyboard/Mouse Connector CN Label: KB_MS1 CN Type: 6-pin wafer (1x6) CN Location: See Figure 3-10 CN Pinouts: See Table 3-11 The keyboard/mouse connector connects to a PS/2 Y-cable that can be connected to a PS/2 keyboard and mouse. Figure 3-10: Keyboard/Mouse Connector Location Pin Description 1 VCC 2 Mouse Data 3 Mouse Clock 4 Keyboard Data 5 Keyboard Clock 6 GND Table 3-11: Keyboard/Mouse Connector Pinouts 3.2.
PAGE 39
KINO-PV-D5252/D4252 Mini ITX SBC CN Location: See Figure 3-11 CN Pinouts: See Table 3-12 The keypad connector can be used to install a numeric keypad. Figure 3-11: Keypad Connector Location Pin Description 1 Red LED 2 NC 3 Green LED 4 Menu/Enter 5 Up 6 Down 7 Auto/Exit 8 Power 9 Ground Table 3-12: Keypad Connector Pinouts 3.2.
PAGE 40
KINO-PV-D5252/D4252 Mini ITX SBC CN Location: See Figure 3-12 CN Pinouts: See Table 3-13 The LVDS connector is for an LCD panel connected to the board.
PAGE 41
KINO-PV-D5252/D4252 Mini ITX SBC Pin Description Pin Description 27 VCC_LCD 28 VCC_LCD 29 VCC_LCD 30 VCC_LCD Table 3-13: LVDS1 Connector Pinouts 3.2.12 LVDS1 Backlight Inverter Connector CN Label: INV1 CN Type: 5-pin wafer CN Location: See Figure 3-13 CN Pinouts: See Table 3-14 The backlight inverter connector provides power to an LCD panel.
PAGE 42
KINO-PV-D5252/D4252 Mini ITX SBC 3.2.13 LVDS2 Connector CN Label: LVDS2 CN Type: 20-pin crimp CN Location: See Figure 3-12 CN Pinouts: See Table 3-13 The LVDS connector is for an LCD panel connected to the board.
PAGE 43
KINO-PV-D5252/D4252 Mini ITX SBC 3.2.14 LVDS2 Backlight Inverter Connector CN Label: INV2 CN Type: 5-pin wafer CN Location: See Figure 3-13 CN Pinouts: See Table 3-14 The backlight inverter connector provides power to an LCD panel. Figure 3-15: LVDS2 Backlight Inverter Connector Location Pin Description 1 LCD_BKLTCTL 2 GROUND 3 +12V 4 GROUND 5 BACKLIGHT ENABLE Table 3-16: LVDS2 Backlight Inverter Connector Pinouts 3.2.
PAGE 44
KINO-PV-D5252/D4252 Mini ITX SBC CN Pinouts: See Table 3-17 The parallel port connector connects to a parallel port connector interface or some other parallel port device such as a printer.
PAGE 45
KINO-PV-D5252/D4252 Mini ITX SBC 3.2.16 PCIe Mini Card Slot CN Label: CN2 CN Type: PCIe Mini card slot CN Location: See Figure 3-17 CN Pinouts: See Table 3-18 791H The PCIe Mini card slot is for installing PCIe Mini expansion cards. Figure 3-17: PCIe Mini Card Slot Location Pin Description Pin Description 1 PCIE_WAKE# 2 VCC3 3 N/C 4 GND 5 N/C 6 1.
PAGE 46
KINO-PV-D5252/D4252 Mini ITX SBC Pin Description Pin Description 17 PCIRST# 18 GND 19 LPC 20 VCC3 21 GND 22 PCIRST# 23 PERN2 24 3VDual 25 PERP2 26 GND 27 GND 28 1.5 V 29 GND 30 SMBCLK 31 PETN2 32 SMBDATA 33 PETP2 34 GND 35 GND 36 USBD- 37 GND 38 USBD+ 39 SATARXP 40 GND 41 SATARXN 42 N/C 43 N/C 44 RF_LINK# 45 SATATXN 46 BLUELED# 47 SATATXP 48 1.5 V 49 GND 50 GND 51 N/C 52 VCC3 Table 3-18: PCIe Mini Card Slot Pinouts 3.2.
PAGE 47
KINO-PV-D5252/D4252 Mini ITX SBC Figure 3-18: SATA Drive Connector Locations Pin Description 1 GND 2 TX+ 3 TX- 4 GND 5 RX- 6 RX+ 7 GND Table 3-19: SATA Drive Connector Pinouts 3.2.18 SATA Power Connector CN Label: SATA_PWR1 CN Type: 2-pin wafer CN Location: See Figure 3-19 CN Pinouts: See Table 3-20 The SATA Power Connector provides power output to the SATA connectors.
PAGE 48
KINO-PV-D5252/D4252 Mini ITX SBC Figure 3-19: SATA Power Connector Locations Pin Description 1 +5V 2 GND Table 3-20: SATA Power Connector Pinouts CN Label: SATA_PWR2 CN Type: 4-pin wafer CN Location: See Figure 3-20 CN Pinouts: See Table 3-21 The SATA Power Connector provides power output to the SATA connectors.
PAGE 49
KINO-PV-D5252/D4252 Mini ITX SBC Figure 3-20: SATA Power Connector Locations Pin Description 1 12V 2 GND 3 GND 4 5V Table 3-21: SATA Power Connector Pinouts 3.2.19 Serial Port Connectors (RS-232) CN Label: COM5, COM6 CN Type: 10-pin header (2x5) CN Location: See Figure 3-21 CN Pinouts: See Table 3-22 795H 796H This connector provides RS-232 communications.
PAGE 50
KINO-PV-D5252/D4252 Mini ITX SBC Figure 3-21: Serial Port (COM5 and COM6) Connector Pinout Locations Pin Description Pin Description 1 Data Carrier Direct (DCD) 2 Data Set Ready (DSR) 3 Receive Data (RXD) 4 Request To Send (RTS) 5 Transmit Data (TXD) 6 Clear To Send (CTS) 7 Data Terminal Ready (DTR) 8 Ring Indicator (RI) 9 Ground (GND) 10 Ground (GND) Table 3-22: Serial Port Connector Pinouts 3.2.
PAGE 51
KINO-PV-D5252/D4252 Mini ITX SBC Figure 3-22: Serial Port (COM2) Connector Location Pin Description Pin Description 1 DCD 2 DSR 3 RXD 4 RTS 5 TXD 6 CTS 7 DTR 8 RI 9 GND 10 N/C 11 TXD485+ 12 TXD485# 13 RXD485+ 14 RXD485# Table 3-23: Serial Port (COM2) Connector Pinouts 3.2.
PAGE 52
KINO-PV-D5252/D4252 Mini ITX SBC Figure 3-23: SMBus Connector Locations Pin Description 1 Ground 2 SMB_DATA 3 SMB_CLK 4 +5V Table 3-24: SMBus Connector Pinouts 3.2.22 USB Connectors CN Label: USB1, USB2 CN Type: 8-pin header (2x4) CN Location: See Figure 3-24 CN Pinouts: See Table 3-25 The USB connectors connect to USB devices. Each pin header provides two USB ports.
PAGE 53
KINO-PV-D5252/D4252 Mini ITX SBC Figure 3-24: USB Connector Pinout Locations Pin Description Pin Description 1 VCC 2 GND 3 DATA- 4 DATA+ 5 DATA+ 6 DATA- 7 GND 8 VCC Table 3-25: USB Port Connector Pinouts 3.3 External Peripheral Interface Connector Panel Figure 3-25 shows the KINO-PV-D5252/D4252 external peripheral interface connector 803H (EPIC) panel.
PAGE 54
KINO-PV-D5252/D4252 Mini ITX SBC Figure 3-25: KINO-PV-D5252/D4252 External Peripheral Interface Connector 3.3.1 Audio Connector CN Label: JAUDIO1 CN Type: Line-out, Mic CN Location: See Figure 3-25 80H The audio jacks connect to external audio devices.  Line-out port (Lime): Connects to a headphone or a speaker. With multi-channel configurations, this port can also connect to front speakers.  Microphone (Pink): Connects a microphone. Figure 3-26: Audio Connector 3.3.
PAGE 55
KINO-PV-D5252/D4252 Mini ITX SBC The KINO-PV-D5252/D4252 is equipped with two built-in RJ-45 Ethernet controllers. The controllers can connect to the LAN through the RJ-45 LAN connectors. Pin Description Pin Description P1 3.
PAGE 56
KINO-PV-D5252/D4252 Mini ITX SBC Pin Description 1 VCC 2 DATA0- 3 DATA0+ 4 GND 5 VCC 6 DATA1- 7 DATA1+ 8 GND Table 3-28: USB Pinouts 3.3.3 Power Connector CN Label: PWR1 CN Type: 5-pin connector CN Location: See Figure 3-25 CN Pinouts: See Table 3-29 80H 809H The connector supports the 12V power adapter. Pin Description 1 12V 2 GND 3 12V 4 GND 5 GND Table 3-29: Power Connector Pinouts 3.3.
PAGE 57
KINO-PV-D5252/D4252 Mini ITX SBC CN Pinouts: See Table 3-30 The serial port connects to a RS-232 serial communications device. Pin Description 1 DATA CARRIER DETECT (DCD) 2 DATA SET READY (DSR) 3 RECEIVE DATA (RXD) 4 REQUEST TO SEND (RTS) 5 TRANSMIT DATA (TXD) 6 CLEAR TO SEND (CTS) 7 DATA TERMINAL READY (DTR) 8 RING INDICATOR (RI) 9 GND (GND) 10 N/C Table 3-30: Serial Port Pinouts 3.3.
PAGE 58
KINO-PV-D5252/D4252 Mini ITX SBC Pin Description Pin Description 3 BLUE 4 NC 5 GND 6 GND 7 GND 8 GND 9 CRT_VCC 10 Display_GND 11 NC 12 DDCDAT 13 HSYNC 14 VSYNC 15 DDCCLK Table 3-31: VGA Connector Pinouts Page 44
PAGE 59
KINO-PV-D5252/D4252 Mini ITX SBC Chapter 4 4 Installation Page 45
PAGE 60
KINO-PV-D5252/D4252 Mini ITX SBC 4.1 Anti-static Precautions WARNING: Failure to take ESD precautions during the installation of the KINO-PV-D5252/D4252 may result in permanent damage to the KINO-PV-D5252/D4252 and severe injury to the user. Electrostatic discharge (ESD) can cause serious damage to electronic components, including the KINO-PV-D5252/D4252. Dry climates are especially susceptible to ESD.
PAGE 61
KINO-PV-D5252/D4252 Mini ITX SBC 4.2 Installation Considerations NOTE: The following installation notices and installation considerations should be read and understood before the KINO-PV-D5252/D4252 is installed. All installation notices pertaining to the installation of the KINO-PV-D5252/D4252 should be strictly adhered to. Failing to adhere to these precautions may lead to severe damage of the KINO-PV-D5252/D4252 and injury to the person installing the motherboard. 4.2.
PAGE 62
KINO-PV-D5252/D4252 Mini ITX SBC  Turn all power to the KINO-PV-D5252/D4252 off: o When working with the KINO-PV-D5252/D4252, make sure that it is disconnected from all power supplies and that no electricity is being fed into the system. Before and during the installation of the KINO-PV-D5252/D4252 DO NOT:  Remove any of the stickers on the PCB board. These stickers are required for warranty validation.  Use the product before verifying all the cables and power connectors are properly connected.
PAGE 63
KINO-PV-D5252/D4252 Mini ITX SBC 4.4.1 SO-DIMM Installation To install a SO-DIMM, please follow the steps below and refer to Figure 4-1. Figure 4-1: SO-DIMM Installation Step 1: Locate the SO-DIMM socket on the board (See the figure below). Place the board on an anti-static mat.
PAGE 64
KINO-PV-D5252/D4252 Mini ITX SBC Step 2: Align the SO-DIMM with the socket. Align the notch on the memory with the notch on the memory socket. Step 3: Insert the SO-DIMM. Push the memory in at a 20º angle. (See Figure 4-1) Step 4: Seat the SO-DIMM. Gently push downwards and the arms clip into place. (See Figure 4-1) 4.5 CompactFlash® Installation NOTE: Both CompactFlash® Type I and Type II cards are supported. To install the CompactFlash® card, please follow the steps below.
PAGE 65
KINO-PV-D5252/D4252 Mini ITX SBC Figure 4-3: CompactFlash® Card Installation 4.6 Jumper Settings NOTE: A jumper is a metal bridge used to close an electrical circuit. It consists of two or three metal pins and a small metal clip (often protected by a plastic cover) that slides over the pins to connect them. To CLOSE/SHORT a jumper means connecting the pins of the jumper with the plastic clip and to OPEN a jumper means removing the plastic clip from a jumper.
PAGE 66
KINO-PV-D5252/D4252 Mini ITX SBC Before the KINO-PV-D5252/D4252 is installed in the system, the jumpers must be set in accordance with the desired configuration. The jumpers on the KINO-PV-D5252/D4252 are listed in Table 4-1.
PAGE 67
KINO-PV-D5252/D4252 Mini ITX SBC Figure 4-4: AT/ATX Power Select Jumper Location 4.6.2 Clear CMOS Jumper Jumper Label: J_CMOS1 Jumper Type: 3-pin header (1x3) Jumper Settings: See Table 4-3 Jumper Location: See Figure 4-5 830H 831H If the KINO-PV-D5252/D4252 fails to boot due to improper BIOS settings, the clear CMOS jumper clears the CMOS data and resets the system BIOS information.
PAGE 68
KINO-PV-D5252/D4252 Mini ITX SBC Clear CMOS Description Short 1 - 2 Keep CMOS Setup Short 2 - 3 Clear CMOS Setup Default Table 4-3: Clear CMOS Jumper Settings The location of the clear CMOS jumper is shown in Figure 4-5 below. 83H Figure 4-5: Clear CMOS Jumper 4.6.3 CompactFlash® Card Setup Jumper Jumper Label: JCF1 Jumper Type: 2-pin header Jumper Settings: See Table 4-4 Jumper Location: See Figure 4-6 The CompactFlash® slot is connected through an IDE connection.
PAGE 69
KINO-PV-D5252/D4252 Mini ITX SBC Figure 4-6: CompactFlash® Setup Jumper Location 4.6.4 LVDS1 Panel Resolution Type Select Jumper (For Intel® Atom™ processor D525 dual LVDS only) Jumper Label: J2 Jumper Type: 6-pin header Jumper Settings: See Table 4-6 Jumper Location: See Figure 4-8 The LVDS1 Panel Resolution jumper configures the resolution of the LVDS output. The LVDS1 Panel Resolution jumper settings are shown below.
PAGE 70
KINO-PV-D5252/D4252 Mini ITX SBC Figure 4-7: LVDS1 Panel Resolution Jumper Location 4.6.5 LVDS2 Panel Resolution Select Jumper Jumper Label: J_LCD_TYPE1 Jumper Type: 6-pin header Jumper Settings: See Table 4-6 Jumper Location: See Figure 4-8 The LVDS2 Panel Resolution jumper configures the resolution of the LVDS output. The LVDS2 Panel Resolution jumper settings are shown below.
PAGE 71
KINO-PV-D5252/D4252 Mini ITX SBC Setting Description Short 1-2, 3-4 and 5-6 1280 x 600 (18 bit) Table 4-6: LVDS2 Panel Resolution Jumper Settings Figure 4-8: LVDS2 Panel Resolution Jumper Location 4.6.6 LVDS1 Voltage Select setting Jumper Label: J_VLVDS1 Jumper Type: 6-pin header Jumper Settings: See Table 4-8 Jumper Location: See Figure 4-10 The voltage selection jumper sets the voltage of the power supplied to the LCD panel.
PAGE 72
KINO-PV-D5252/D4252 Mini ITX SBC Figure 4-9: LVDS1 Voltage Select Jumper Location 4.6.7 LVDS2 Voltage Select setting Jumper Label: J_VLVDS2 Jumper Type: 2-pin header Jumper Settings: See Table 4-8 Jumper Location: See Figure 4-10 The voltage selection jumper sets the voltage of the power supplied to the LCD panel. Setting Description Short 1-2 3.
PAGE 73
KINO-PV-D5252/D4252 Mini ITX SBC Figure 4-10: LVDS2 Voltage Select Jumper Location 4.6.8 Serial Port Setting Jumper Jumper Label: JP3 Jumper Type: 8-pin header Jumper Settings: See Table 4-9 Jumper Location: See Figure 4-11 Used for RS-232/422/485 communications.
PAGE 74
KINO-PV-D5252/D4252 Mini ITX SBC Figure 4-11: Serial Port Jumper Locations 4.7 Chassis Installation 4.7.1 Airflow WARNING: Airflow is critical to the cooling of the CPU and other onboard components. The chassis in which the KINO-PV-D5252/D4252 must have air vents to allow cool air to move into the system and hot air to move out. The KINO-PV-D5252/D4252 must be installed in a chassis with ventilation holes on the sides allowing airflow to travel through the heat sink surface.
PAGE 75
KINO-PV-D5252/D4252 Mini ITX SBC 4.8 Internal Peripheral Device Connections This section outlines the installation of peripheral devices to the onboard connectors 4.8.1 AT/ATX Power Connection Follow the instructions below to connect the KINO-PV-D5252/D4252 to an AT or ATX power supply. WARNING: Disconnect the power supply power cord from its AC power source to prevent a sudden power surge to the KINO-PV-D5252/D4252. Step 1: Locate the power cable.
PAGE 76
KINO-PV-D5252/D4252 Mini ITX SBC Figure 4-12: Power Cable to Motherboard Connection Step 3: Connect Power Cable to Power Supply. Connect one of the 4-pin (1x4) Molex type power cable connectors to an AT/ATX power supply. See Figure 4-13.
PAGE 77
KINO-PV-D5252/D4252 Mini ITX SBC Figure 4-13: Connect Power Cable to Power Supply 4.8.2 Single RS-232 Cable with Slot Bracket The single RS-232 cable consists of one serial port connectors attached to a serial communications cable that is then attached to a D-sub 9 male connector that is mounted onto a bracket. To install the single RS-232 cable, please follow the steps below. Step 1: Locate the connector. The location of the RS-232 connector is shown in Chapter 3. Step 2: Insert the cable connector.
PAGE 78
KINO-PV-D5252/D4252 Mini ITX SBC Figure 4-14: Single RS-232 Cable Installation Step 3: Secure the bracket. The single RS-232 connector has one D-sub 9 male connector secured to a bracket. To secure the bracket to the chassis please refer to the reference material that came with the chassisStep 0: 4.9 External Peripheral Interface Connection The following external peripheral devices can be connected to the external peripheral interface connectors.
PAGE 79
KINO-PV-D5252/D4252 Mini ITX SBC To install these devices, connect the corresponding cable connector from the actual device to the corresponding KINO-PV-D5252/D4252 external peripheral interface connector making sure the pins are properly aligned. 4.9.1 Audio Connector The audio jacks on the external audio connector enable the KINO-PV-D5252/D4252 to be connected to a stereo sound setup. To install the audio devices, follow the steps below. Step 1: Identify the audio plugs.
PAGE 80
KINO-PV-D5252/D4252 Mini ITX SBC 4.9.2 LAN Connection (Dual Connector) There are two external RJ-45 LAN connectors. The RJ-45 connector enables connection to an external network. To connect a LAN cable with an RJ-45 connector, please follow the instructions below. Step 1: Locate the RJ-45 connectors. The location of the LAN connector is shown in Chapter 3. Step 2: Align the connectors. Align the RJ-45 connector on the LAN cable with one of the RJ-45 connectors on the KINO-PV-D5252/D4252. See Figure 4-16.
PAGE 81
KINO-PV-D5252/D4252 Mini ITX SBC Step 1: Locate the DB-9 connector. The location of the DB-9 connector is shown in Chapter 3. Step 2: Insert the serial connector. Insert the DB-9 connector of a serial device into the DB-9 connector on the external peripheral interface. See Figure 4-17. Figure 4-17: Serial Device Connector Step 3: Secure the connector. Secure the serial device connector to the external interface by tightening the two retention screws on either side of the connector. Step 0: 4.9.
PAGE 82
KINO-PV-D5252/D4252 Mini ITX SBC Step 2: Insert a USB Series "A" plug. Insert the USB Series "A" plug of a device into the USB Series "A" receptacle on the external peripheral interface. See Figure 4-18. Step 0: Figure 4-18: USB Connector 4.9.5 VGA Monitor Connection The KINO-PV-D5252/D4252 has a single female DB-15 connector on the external peripheral interface panel. The DB-15 connector is connected to a CRT or VGA monitor.
PAGE 83
KINO-PV-D5252/D4252 Mini ITX SBC Step 3: Insert the VGA connector. Once the connectors are properly aligned with the insert the male connector from the VGA screen into the female connector on the KINO-PV-D5252/D4252. See Figure 4-19. Figure 4-19: VGA Connector Step 4: Secure the connector. Secure the DB-15 VGA connector from the VGA monitor to the external interface by tightening the two retention screws on either side of the connector. Step 0: 4.
PAGE 84
KINO-PV-D5252/D4252 Mini ITX SBC Step 2: The driver main menu appears (Figure 4-20). Figure 4-20: Introduction Screen Step 3: Click KINO-PV-D5252/D4252. Step 4: A new screen with a list of available drivers appears (Figure 4-21).
PAGE 85
KINO-PV-D5252/D4252 Mini ITX SBC Figure 4-21: Available Drivers Step 5: Install all of the necessary drivers in this menu.
PAGE 86
KINO-PV-D5252/D4252 Mini ITX SBC Chapter 5 5 BIOS Screens Page 72
PAGE 87
KINO-PV-D5252/D4252 Mini ITX SBC 5.1 Introduction The BIOS is programmed onto the BIOS chip. The BIOS setup program allows changes to certain system settings. This chapter outlines the options that can be changed. 5.1.1 Starting Setup The UEFI BIOS is activated when the computer is turned on. The setup program can be activated in one of two ways. 1. Press the F2 key as soon as the system is turned on or 2. Press the F2 key when the “Press F2 to enter SETUP” message appears on the screen. 0.
PAGE 88
KINO-PV-D5252/D4252 Mini ITX SBC Key Function Esc Main Menu – Quit and do not save changes into CMOS Status Page Setup Menu and Option Page Setup Menu -Exit current page and return to Main Menu F1 General help, only for Status Page Setup Menu and Option Page Setup Menu F9 Load optimized defaults F10 Save changes and Exit BIOS Table 5-1: BIOS Navigation Keys 5.1.
PAGE 89
KINO-PV-D5252/D4252 Mini ITX SBC 5.2 Main The Main BIOS menu (BIOS Menu 1) appears when the BIOS Setup program is entered. The Main menu gives an overview of the basic system information. Aptio Setup Utility – Copyright (C) 2010 American Megatrends, Inc. Main Advanced Chipset Boot Security Save & Exit BIOS Information BIOS Vendor Core Version Compliency Project Version Build Date American Megatrends 4.6.4.0 0.20 UEFI 2.0 E350AR12.
PAGE 90
KINO-PV-D5252/D4252 Mini ITX SBC  System Time [xx:xx:xx] Use the System Time option to set the system time. Manually enter the hours, minutes and seconds. 5.3 Advanced Use the Advanced menu (BIOS Menu 2) to configure the CPU and peripheral devices through the following sub-menus: WARNING! Setting the wrong values in the sections below may cause the system to malfunction. Make sure that the settings made are compatible with the hardware. Aptio Setup Utility – Copyright (C) 2010 American Megatrends, Inc.
PAGE 91
KINO-PV-D5252/D4252 Mini ITX SBC 5.3.1 ACPI Settings The ACPI Settings menu (BIOS Menu 3) configures the Advanced Configuration and Power Interface (ACPI) options. Aptio Setup Utility – Copyright (C) 2010 American Megatrends, Inc. Advanced ACPI Sleep State [S1 (CPU Stop Clock)] : Select Screen  : Select Item Enter Select +/-: Change Opt. F1 General Help F2 Previous Values F3 Optimized Defaults F4 Save & Exit ESC Exit Version 2.10.1208. Copyright (C) 2010 American Megatrends, Inc.
PAGE 92
KINO-PV-D5252/D4252 Mini ITX SBC 5.3.2 Trusted Computing Use the Trusted Computing menu (BIOS Menu 4) to configure settings related to the Trusted Computing Group (TCG) Trusted Platform Module (TPM). Aptio Setup Utility – Copyright (C) 2010 American Megatrends, Inc. Advanced TPM Configuration TPM SUPPORT [Disable] Current TPM Status Information NO TPM Hardware Enables or Disables TPM support. O.S. will not show TPM. Reset of platform is required.
PAGE 93
KINO-PV-D5252/D4252 Mini ITX SBC 5.3.3 CPU Configuration Use the CPU Configuration menu (BIOS Menu 5) to view detailed CPU specifications and configure the CPU. Aptio Setup Utility – Copyright (C) 2010 American Megatrends, Inc. Advanced CPU Configuration Processor Type EMT64 Processor Speed System Bus Speed Ratio Status Actual Ratio Processor Stepping Microcode Revision L1 Cache RAM L2 Cache RAM Processor Core Hyper-Threading Intel(R) Atom(TM) CPU CPU D425 @ 1.
PAGE 94
KINO-PV-D5252/D4252 Mini ITX SBC 5.3.4 IDE Configuration Use the IDE Configuration menu (BIOS Menu 6) to change and/or set the configuration of the ATA/IDE devices installed in the system. Aptio Setup Utility – Copyright (C) 2010 American Megatrends, Inc.
PAGE 95
KINO-PV-D5252/D4252 Mini ITX SBC  Configure SATA as [IDE] Use the Configure SATA as option to configure SATA devices as normal IDE devices.  IDE  AHCI DEFAULT Configures SATA devices as normal IDE device. Configures SATA devices as AHCI device. 5.3.5 USB Configuration Use the USB Configuration menu (BIOS Menu 7) to read USB configuration information and configure the USB settings. Aptio Setup Utility – Copyright (C) 2010 American Megatrends, Inc.
PAGE 96
KINO-PV-D5252/D4252 Mini ITX SBC  Enabled  Disabled Legacy USB support disabled  Auto Legacy USB support disabled if no USB devices are DEFAULT Legacy USB support enabled connected 5.3.6 Super IO Configuration Use the Super IO Configuration menu (BIOS Menu 8) to set or change the configurations for the FDD controllers, parallel ports and serial ports. Aptio Setup Utility – Copyright (C) 2010 American Megatrends, Inc.
PAGE 97
KINO-PV-D5252/D4252 Mini ITX SBC 5.3.6.1 Serial Port 0 Configuration Use the Serial Port 0 Configuration menu (BIOS Menu 9) to configure the serial port 0. Aptio Setup Utility – Copyright (C) 2010 American Megatrends, Inc. Advanced Serial Port 0 Configuration Serial Port Device Settings [Enabled] IO=3F8h; IRQ=4 Change Settings [Auto] : Select Screen  : Select Item Enter Select +/-: Change Opt. F1 General Help F2 Previous Values F3 Optimized Defaults F4 Save & Exit ESC Exit Version 2.10.1208.
PAGE 98
KINO-PV-D5252/D4252 Mini ITX SBC  IO=2F8h; Serial Port I/O port address is 2F8h and the interrupt IRQ=3, 4 address is IRQ3 and IRQ4 5.3.6.1.1 Serial Port 1 Configuration  Serial Port [Enabled] Use the Serial Port option to enable or disable the serial port.   Disabled  Enabled Disable the serial port DEFAULT Enable the serial port Device Mode Use the Device Mode option to set the Serial Port 1 signaling mode.
PAGE 99
KINO-PV-D5252/D4252 Mini ITX SBC 5.3.6.1.2 Serial Port 2 Configuration  Serial Port [Enabled] Use the Serial Port option to enable or disable the serial port.   Disabled  Enabled Disable the serial port DEFAULT Enable the serial port Change Settings [Auto] Use the Change Settings option to change the serial port IO port address and interrupt address.  Auto DEFAULT The serial port IO port address and interrupt address are automatically detected.
PAGE 100
KINO-PV-D5252/D4252 Mini ITX SBC  Auto DEFAULT The serial port IO port address and interrupt address are automatically detected.    IO=2E8h; Serial Port I/O port address is 2E8h and the interrupt IRQ=10 address is IRQ10 IO=3E8h; Serial Port I/O port address is 3E8h and the interrupt IRQ=10, 11 address is IRQ10, 11 IO=2E8h; Serial Port I/O port address is 2E8h and the interrupt IRQ=10, 11 address is IRQ10, 11 5.3.6.
PAGE 101
KINO-PV-D5252/D4252 Mini ITX SBC  Change Settings [Auto] Use the Change Settings option to change the parallel port IO port address and interrupt address.  Auto DEFAULT The parallel port IO port address and interrupt address are automatically detected.
PAGE 102
KINO-PV-D5252/D4252 Mini ITX SBC 5.3.7 H/W Monitor The H/W Monitor menu (BIOS Menu 11) shows the operating temperature, fan speeds and system voltages. Aptio Setup Utility – Copyright (C) 2010 American Megatrends, Inc.
PAGE 103
KINO-PV-D5252/D4252 Mini ITX SBC  Voltages: o o o o o o o  VCC3V V_core Vcc Vcc12 Vcc1_5VDDR VSB3V VBAT CPU Smart Fan control [Auto Mode] Use the CPU Smart Fan control option to configure the CPU fan.
PAGE 104
KINO-PV-D5252/D4252 Mini ITX SBC 5.3.8 Secondary Super IO Configuration The Secondary Super IO Configuration (BIOS Menu 13) displays IO chip type and the submenus for configuring the external SATA ports 5 and 6. Aptio Setup Utility – Copyright (C) 2010 American Megatrends, Inc. Advanced Secondary Super IO Configuration Super IO Chip Fintek F81216 > Serial Port 5 Configuration > Serial Port 6 Configuration : Select Screen  : Select Item Enter Select +/-: Change Opt.
PAGE 105
KINO-PV-D5252/D4252 Mini ITX SBC       IO=2C0h; Serial Port I/O port address is 2C0h and the interrupt IRQ=11 address is IRQ11 IO=2C0h; Serial Port I/O port address is 2C0h and the interrupt IRQ=10, 11 address is IRQ10, 11 IO=2C8h; Serial Port I/O port address is 2C8h and the interrupt IRQ=10, 11 address is IRQ10, 11 IO=2D0h; Serial Port I/O port address is 2D0h and the interrupt IRQ=10, 11 address is IRQ10, 11 IO=2D8h; Serial Port I/O port address is 2D8h and the interrupt IRQ=10,
PAGE 106
KINO-PV-D5252/D4252 Mini ITX SBC     IO=2C8h; Serial Port I/O port address is 2C8h and the interrupt IRQ=10, 11 address is IRQ10, 11 IO=2D0h; Serial Port I/O port address is 2D0h and the interrupt IRQ=10, 11 address is IRQ10, 11 IO=2D8h; Serial Port I/O port address is 2D8h and the interrupt IRQ=10, 11 address is IRQ10, 11 IO=2E0h; Serial Port I/O port address is 2E0h and the interrupt IRQ=10, 11 address is IRQ10, 11 5.3.
PAGE 107
KINO-PV-D5252/D4252 Mini ITX SBC  Console Redirection [Disabled] Use Console Redirection option to enable or disable the console redirection function.  Disabled  Enabled DEFAULT Disabled the console redirection function Enabled the console redirection function 5.4 Chipset Use the Chipset menu (BIOS Menu 14) to access the Northbridge and Southbridge configuration menus WARNING! Setting the wrong values for the Chipset BIOS selections in the Chipset BIOS menu may cause the system to malfunction.
PAGE 108
KINO-PV-D5252/D4252 Mini ITX SBC 5.4.1 Host Bridge Configuration Use the Host Bridge Configuration menu (BIOS Menu 15) to configure the Northbridge chipset. Aptio Setup Utility – Copyright (C) 2010 American Megatrends, Inc. Chipset > Memory Frequency and Timing > OnChip VGA Configuration MMIO Size Initate Graphic Adapter [AUTO] [IGD] ******* Memory Information ******* Memory Frequency 800 Mhz : Select Screen  : Select Item Enter Select DIMM#0 2048 MB +/-: Change Opt.
PAGE 109
KINO-PV-D5252/D4252 Mini ITX SBC  ION  PCI/PEG DEFAULT Enables ION graphics controller. Enables PCI/PEG graphics controller. 5.4.1.1 Memory Frequency and Timing Use the Memory Frequency and Timing submenu (BIOS Menu 16) to configure memory frequency and timing settings. Aptio Setup Utility – Copyright (C) 2010 American Megatrends, Inc. Chipset Memory Frequency and Timing DRAM Frequency Auto DRAM Timing Select DRAM Frequency.
PAGE 110
KINO-PV-D5252/D4252 Mini ITX SBC  Enabled  Disabled DEFAULT Enables DRAM Timing. Disables DRAM Timing. 5.4.1.2 OnChip VGA Configuration Use the OnChip VGA Configuration submenu (BIOS Menu 16) to configure the OnChip VGA. Aptio Setup Utility – Copyright (C) 2010 American Megatrends, Inc. Chipset OnChip VGA Configuration Select Share Memory Size. Share Memory Size Multi-Monitor Support [8 MB] [Enabled] --------------------: Select Screen  : Select Item Enter Select +/-: Change Opt.
PAGE 111
KINO-PV-D5252/D4252 Mini ITX SBC  Multi-Monitor Support [Enabled] Use Multi-Monitor Support option to enable or disable the multi-monitor function.  Disabled  Enabled Disabled the multi-monitor function DEFAULT Enabled the multi-monitor function 5.4.2 South Bridge Configuration Use the South Bridge Configuration menu (BIOS Menu 18) to configure the Southbridge chipset. Aptio Setup Utility – Copyright (C) 2010 American Megatrends, Inc.
PAGE 112
KINO-PV-D5252/D4252 Mini ITX SBC  HD Audio Controller [Enabled] Use the HD Audio Controller option to enable or disable the High Definition Audio controller.  Enabled DEFAULT The onboard High Definition Audio controller automatically detected and enabled   The onboard High Definition Audio controller is disabled Disabled USB Function [Enabled] Use the USB Function BIOS option to enable or disable USB function support.
PAGE 113
KINO-PV-D5252/D4252 Mini ITX SBC Aptio Setup Utility – Copyright (C) 2010 American Megatrends, Inc. Advanced Chipset Intel IGD SWSCI OpRegion Configuration DVMT Mode Select DVMT/FIXED Memory IGD - Boot Type LCD Panel Type Panel ID Resolution Select DVMT Mode/Fixed Mode [DVMT Mode] [Maximum] [VBIOS Default] [Select by Panel ID] 800x600 18bit --------------------: Select Screen  : Select Item Enter Select +/-: Change Opt.
PAGE 114
KINO-PV-D5252/D4252 Mini ITX SBC   VBIOS Default  CRT  LFP  CRT + LFP DEFAULT LCD Panel Type [VBIOS Default] Use the LCD Panel Type option to select the type of flat panel connected to the system. Configuration options are listed below.
PAGE 115
KINO-PV-D5252/D4252 Mini ITX SBC 5.5 Boot Use the Boot menu (BIOS Menu 20) to configure system boot options. Aptio Setup Utility – Copyright (C) 2010 American Megatrends, Inc. Main Advanced Chipset Boot Security Save & Exit Boot Configuration Boot NumLock State [On] Quiet Boot Launch PXE OpROM [Enabled] [Disabled] Boot Option Priorities : Select Screen  : Select Item Enter Select +/-: Change Opt. F1 General Help F2 Previous Values F3 Optimized Defaults F4 Save & Exit ESC Exit Version 2.10.1208.
PAGE 116
KINO-PV-D5252/D4252 Mini ITX SBC  Quiet Boot [Enabled] Use the Quiet Boot BIOS option to select the screen display when the system boots.   Disabled  Enabled Normal POST messages displayed DEFAULT OEM Logo displayed instead of POST messages Launch PXE OpROM [Disabled] Use the Launch PXE OpROM option to enable or disable boot option for legacy network devices.  Disabled  Enabled DEFAULT Ignore all PXE Option ROMs Load PXE Option ROMs. 5.
PAGE 117
KINO-PV-D5252/D4252 Mini ITX SBC  User Password Use the User Password option to set or change a user password. 5.7 Exit Use the Exit menu (BIOS Menu 22) to load default BIOS values, optimal failsafe values and to save configuration changes. Aptio Setup Utility – Copyright (C) 2010 American Megatrends, Inc.
PAGE 118
KINO-PV-D5252/D4252 Mini ITX SBC  Save as User Defaults Use the Save as User Defaults option to save the changes done so far as user defaults.  Restore User Defaults Use the Restore User Defaults option to restore the user defaults to all the setup options.
PAGE 119
KINO-PV-D5252/D4252 Mini ITX SBC Appendix A A BIOS Options Page 105
PAGE 120
KINO-PV-D5252/D4252 Mini ITX SBC Below is a list of BIOS configuration options in the BIOS chapter. BIOS Information .................................................................................................................75 System Date [xx/xx/xx] ........................................................................................................75 System Time [xx:xx:xx] .......................................................................................................
PAGE 121
KINO-PV-D5252/D4252 Mini ITX SBC Share Memory Size [8 MB] ..................................................................................................96 Multi-Monitor Support [Enabled] ........................................................................................97 Restore AC Power Loss [Last State] .................................................................................97 HD Audio Controller [Enabled] .................................................................................
PAGE 122
KINO-PV-D5252/D4252 Mini ITX SBC Appendix B B One Key Recovery Page 108
PAGE 123
KINO-PV-D5252/D4252 Mini ITX SBC B.1 One Key Recovery Introduction The IEI one key recovery is an easy-to-use front end for the Norton Ghost system backup and recovery tool. The one key recovery provides quick and easy shortcuts for creating a backup and reverting to that backup or for reverting to the factory default settings. The IEI One Key Recovery tool menu is shown below.
PAGE 124
KINO-PV-D5252/D4252 Mini ITX SBC B.1.1 System Requirement NOTE: The recovery CD can only be used with IEI products. The software will fail to run and a warning message will appear when used on non-IEI hardware. To create the system backup, the main storage device must be split into two partitions (three partitions for Linux).
PAGE 125
KINO-PV-D5252/D4252 Mini ITX SBC NOTE: Specialized tools are required to change the partition size if the operating system is already installed. B.1.2 Supported Operating System The recovery CD is compatible with both Microsoft Windows and Linux operating system (OS). The supported OS versions are listed below.  Microsoft Windows o o o o o o  Windows XP (Service Pack 2 or 3 required) Windows Vista Windows 7 Windows CE 5.0 Windows CE 6.
PAGE 126
KINO-PV-D5252/D4252 Mini ITX SBC NOTE: Installing unsupported OS versions may cause the recovery tool to fail. B.2 Setup Procedure for Windows Prior to using the recovery tool to backup or restore Windows system, a few setup procedures are required. Step 1: Hardware and BIOS setup (see Section B.2.1) Step 2: Create partitions (see Section B.2.2) Step 3: Install operating system, drivers and system applications (see Section B.2.3) Step 4: Build-up recovery partition (see Section B.2.
PAGE 127
KINO-PV-D5252/D4252 Mini ITX SBC Step 4: Turn on the system. Step 5: Press the key as soon as the system is turned on to enter the BIOS. Step 6: Select the connected optical disk drive as the 1st boot device. (Boot  Boot Device Priority  1st Boot Device). Step 7: Save changes and restart the computer. Continue to the next section for instructions on partitioning the internal storage.Step0: B.2.
PAGE 128
KINO-PV-D5252/D4252 Mini ITX SBC Step 3: The recovery tool setup menu is shown as below. Figure B-3: Recovery Tool Setup Menu Step 4: Press <5> then . Figure B-4: Command Mode Step 5: The command prompt window appears. Type the following commands (marked in red) to create two partitions. One is for the OS installation; the other is for saving recovery files and images which will be an invisible partition.
PAGE 129
KINO-PV-D5252/D4252 Mini ITX SBC system32>format F: /fs:ntfs /q /v:Recovery /y system32>exit Figure B-5: Partition Creation Commands Page 115
PAGE 130
KINO-PV-D5252/D4252 Mini ITX SBC NOTE: Use the following commands to check if the partitions were created successfully. Step 6: Press any key to exit the recovery tool and automatically reboot the system. Please continue to the following procedure: Build-up Recovery Partition.Step0: B.2.3 Install Operating System, Drivers and Applications Install the operating system onto the unlabelled partition.
PAGE 131
KINO-PV-D5252/D4252 Mini ITX SBC B.2.4 Build-up Recovery Partition Step 1: Put the recover CD in the optical drive. Step 2: Start the system. Step 3: Boot the system from recovery CD. When prompted, press any key to boot from the recovery CD. It will take a while to launch the recovery tool. Please be patient! Figure B-6: Launching the Recovery Tool Step 4: When the recovery tool setup menu appears, press <2> then .
PAGE 132
KINO-PV-D5252/D4252 Mini ITX SBC recovery files in Section B.2.2 is hidden and the recovery tool is saved in this partition. Figure B-8: Build-up Recovery Partition Step 6: After completing the system configuration, press any key in the following window to reboot the system. Figure B-9: Press any key to continue Step 7: Eject the recovery CD.
PAGE 133
KINO-PV-D5252/D4252 Mini ITX SBC B.2.5 Create Factory Default Image NOTE: Before creating the factory default image, please configure the system to a factory default environment, including driver and application installations. To create a factory default image, please follow the steps below. Step 1: Turn on the system. When the following screen displays (Figure B-10), press the key to access the recovery tool.
PAGE 134
KINO-PV-D5252/D4252 Mini ITX SBC Figure B-12: About Symantec Ghost Window Step 4: Use mouse to navigate to the option shown below (Figure B-13). Figure B-13: Symantec Ghost Path Step 5: Select the local source drive (Drive 1) as shown in Figure B-14. Then click OK.
PAGE 135
KINO-PV-D5252/D4252 Mini ITX SBC Figure B-14: Select a Local Source Drive Step 6: Select a source partition (Part 1) from basic drive as shown in Figure B-15. Then click OK. Figure B-15: Select a Source Partition from Basic Drive Step 7: Select 1.2: [Recovery] NTFS drive and enter a file name called iei (Figure B-16). Click Save. The factory default image will then be saved in the selected recovery drive and named IEI.GHO. WARNING: The file name of the factory default image must be iei.GHO.
PAGE 136
KINO-PV-D5252/D4252 Mini ITX SBC Figure B-16: File Name to Copy Image to Step 8: When the Compress Image screen in Figure B-17 prompts, click High to make the image file smaller.
PAGE 137
KINO-PV-D5252/D4252 Mini ITX SBC Step 9: The Proceed with partition image creation window appears, click Yes to continue. Figure B-18: Image Creation Confirmation Step 10: The Symantec Ghost starts to create the factory default image (Figure B-19). Figure B-19: Image Creation Complete Step 11: When the image creation completes, a screen prompts as shown in Figure B-20. Click Continue and close the Ghost window to exit the program.
PAGE 138
KINO-PV-D5252/D4252 Mini ITX SBC Step 12: The recovery tool main menu window is shown as below. Press any key to reboot the system. Step0: Figure B-21: Press Any Key to Continue B.3 Setup Procedure for Linux The initial setup procedures for a Linux system are mostly the same with the procedure for Microsoft Windows. Please follow the steps below to setup the recovery tool for Linux OS. Step 1: Hardware and BIOS setup. Refer to Section B.2.1. Step 2: Install Linux operating system.
PAGE 139
KINO-PV-D5252/D4252 Mini ITX SBC NOTE: Please reserve enough space for partition 3 for saving recovery images. Figure B-22: Partitions for Linux Step 3: Create a recovery partition. Insert the recovery CD into the optical disk drive. Follow Step 1 ~ Step 3 described in Section B.2.2. Then type the following commands (marked in red) to create a partition for recovery images.
PAGE 140
KINO-PV-D5252/D4252 Mini ITX SBC Figure B-23: System Configuration for Linux Step 5: Access the recovery tool main menu by modifying the “menu.lst”. To first access the recovery tool main menu, the menu.lst must be modified. In Linux system, enter Administrator (root). When prompt appears, type: cd /boot/grub vi menu.lst Figure B-24: Access menu.lst in Linux (Text Mode) Step 6: Modify the menu.lst as shown below.
PAGE 141
KINO-PV-D5252/D4252 Mini ITX SBC Step 7: The recovery tool menu appears. (Figure B-25) Figure B-25: Recovery Tool Menu Step 8: Create a factory default image. Follow Step 2 ~ Step 12 described in Section B.2.5 to create a factory default image. B.4 Recovery Tool Functions After completing the initial setup procedures as described above, users can access the recovery tool by pressing while booting up the system. The main menu of the recovery tool is shown below.
PAGE 142
KINO-PV-D5252/D4252 Mini ITX SBC Figure B-26: Recovery Tool Main Menu The recovery tool has several functions including: 1. Factory Restore: Restore the factory default image (iei.GHO) created in Section B.2.5. 2. Backup system: Create a system backup image (iei_user.GHO) which will be saved in the hidden partition. 3. Restore your last backup: Restore the last system backup image 4. Manual: Enter the Symantec Ghost window to configure manually. 5. Quit: Exit the recovery tool and restart the system.
PAGE 143
KINO-PV-D5252/D4252 Mini ITX SBC B.4.1 Factory Restore To restore the factory default image, please follow the steps below. Step 1: Type <1> and press in the main menu. Step 2: The Symantec Ghost window appears and starts to restore the factory default. A factory default image called iei.GHO is created in the hidden Recovery partition. Figure B-27: Restore Factory Default Step 3: The screen is shown as in Figure B-28 when completed. Press any key to reboot the system.
PAGE 144
KINO-PV-D5252/D4252 Mini ITX SBC B.4.2 Backup System To backup the system, please follow the steps below. Step 1: Type <2> and press in the main menu. Step 2: The Symantec Ghost window appears and starts to backup the system. A backup image called iei_user.GHO is created in the hidden Recovery partition. Figure B-29: Backup System Step 3: The screen is shown as in Figure B-30 when system backup is completed. Press any key to reboot the system.
PAGE 145
KINO-PV-D5252/D4252 Mini ITX SBC B.4.3 Restore Your Last Backup To restore the last system backup, please follow the steps below. Step 1: Type <3> and press in the main menu. Step 2: The Symantec Ghost window appears and starts to restore the last backup image (iei_user.GHO). Figure B-31: Restore Backup Step 3: The screen is shown as in Figure B-32 when backup recovery is completed. Press any key to reboot the system.
PAGE 146
KINO-PV-D5252/D4252 Mini ITX SBC B.4.4 Manual To restore the last system backup, please follow the steps below. Step 1: Type <4> and press in the main menu. Step 2: The Symantec Ghost window appears. Use the Ghost program to backup or recover the system manually. Figure B-33: Symantec Ghost Window Step 3: When backup or recovery is completed, press any key to reboot the system.
PAGE 147
KINO-PV-D5252/D4252 Mini ITX SBC B.5 Other Information B.5.1 Using AHCI Mode or ALi M5283 / VIA VT6421A Controller When the system uses AHCI mode or some specific SATA controllers such as ALi M5283 or VIA VT6421A, the SATA RAID/AHCI driver must be installed before using one key recovery. Please follow the steps below to install the SATA RAID/AHCI driver. Step 1: Copy the SATA RAID/AHCI driver to a floppy disk and insert the floppy disk into a USB floppy disk drive.
PAGE 148
KINO-PV-D5252/D4252 Mini ITX SBC Step 5: When the following window appears, press ~~to select “Specify Additional Device”. Step 6: In the following window, select a SATA controller mode used in the system. Then press . The user can now start using the SATA HDD.~~
~~PAGE 149~~
KINO-PV-D5252/D4252 Mini ITX SBC Step 7: After pressing , the system will get into the recovery tool setup menu. Continue to follow the setup procedure from Step 4 in Section B.2.2 Create Partitions to finish the whole setup process.Step0: B.5.2 System Memory Requirement To be able to access the recovery tool by pressing while booting up the system, please make sure to have enough system memory. The minimum memory requirement is listed below.
~~PAGE 150~~
~~KINO-PV-D5252/D4252 Mini ITX SBC Appendix C C Terminology Page 136~~
~~PAGE 151~~
KINO-PV-D5252/D4252 Mini ITX SBC AC ’97 Audio Codec 97 (AC’97) refers to a codec standard developed by Intel® in 1997. ACPI Advanced Configuration and Power Interface (ACPI) is an OS-directed configuration, power management, and thermal management interface. AHCI Advanced Host Controller Interface (AHCI) is a SATA Host controller register-level interface. ATA The Advanced Technology Attachment (ATA) interface connects storage devices including hard disks and CD-ROM drives to a computer.
~~PAGE 152~~
KINO-PV-D5252/D4252 Mini ITX SBC DMA Direct Memory Access (DMA) enables some peripheral devices to bypass the system processor and communicate directly with the system memory. DIMM Dual Inline Memory Modules are a type of RAM that offer a 64-bit data bus and have separate electrical contacts on each side of the module. DIO The digital inputs and digital outputs are general control signals that control the on/off circuit of external devices or TTL devices.
~~PAGE 153~~
KINO-PV-D5252/D4252 Mini ITX SBC LCD Liquid crystal display (LCD) is a flat, low-power display device that consists of two polarizing plates with a liquid crystal panel in between. LVDS Low-voltage differential signaling (LVDS) is a dual-wire, high-speed differential electrical signaling system commonly used to connect LCD displays to a computer. POST The Power-on Self Test (POST) is the pre-boot actions the system performs when the system is turned-on.
~~PAGE 154~~
~~KINO-PV-D5252/D4252 Mini ITX SBC Appendix D D Digital I/O Interface Page 140~~
~~PAGE 155~~
KINO-PV-D5252/D4252 Mini ITX SBC D.1 Introduction The DIO connector on the KINO-PV-D5252/D4252 is interfaced to GPIO ports on the Super I/O chipset. The DIO has both 4-bit digital inputs and 4-bit digital outputs. The digital inputs and digital outputs are generally control signals that control the on/off circuit of external devices or TTL devices. Data can be read or written to the selected address to enable the DIO functions.
~~PAGE 156~~
KINO-PV-D5252/D4252 Mini ITX SBC D.3 Assembly Language Samples D.3.1 Enable the DIO Input Function The BIOS interrupt call INT 15H controls the digital I/O. An assembly program to enable digital I/O input functions is listed below. MOV AX, 6F08H Sets the digital port as input INT 15H Initiates the INT 15H BIOS call D.3.2 Enable the DIO Output Function The BIOS interrupt call INT 15H controls the digital I/O. An assembly program to enable digital I/O output functions is listed below.
~~PAGE 157~~
KINO-PV-D5252/D4252 Mini ITX SBC Appendix E E Watchdog Timer NOTE: The following discussion applies to DOS. Contact IEI support or visit the IEI website for drivers for other operating systems. The Watchdog Timer is a hardware-based timer that attempts to restart the system when it stops working. The system may stop working because of external EMI or software bugs. The Watchdog Timer ensures that standalone systems like ATMs will automatically attempt to restart in the case of system problems.
~~PAGE 158~~
KINO-PV-D5252/D4252 Mini ITX SBC AH – 6FH Sub-function: BL: Time-out value (Its unit-second is dependent on the item “Watchdog Timer unit select” in CMOS setup). Table E-1: AH-6FH Sub-function Call sub-function 2 to set the time-out period of Watchdog Timer first. If the time-out value is not zero, the Watchdog Timer starts counting down. When the timer value reaches zero, the system resets.
~~PAGE 159~~
~~KINO-PV-D5252/D4252 Mini ITX SBC CMP EXIT_AP, 1 ;is the application over? JNE W_LOOP ;No, restart the application MOV AX, 6F02H ;disable Watchdog Timer MOV BL, 0 ; INT 15H ; ; EXIT ; Page 145~~
~~PAGE 160~~
~~KINO-PV-D5252/D4252 Mini ITX SBC Appendix F F Hazardous Materials Disclosure Page 146~~
~~PAGE 161~~
KINO-PV-D5252/D4252 Mini ITX SBC F.1 Hazardous Materials Disclosure Table for IPB Products Certified as RoHS Compliant Under 2002/95/EC Without Mercury The details provided in this appendix are to ensure that the product is compliant with the Peoples Republic of China (China) RoHS standards. The table below acknowledges the presences of small quantities of certain materials in the product, and is applicable to China RoHS only.
~~PAGE 162~~
KINO-PV-D5252/D4252 Mini ITX SBC Part Name Toxic or Hazardous Substances and Elements Lead Mercury Cadmium Hexavalent Polybrominated Polybrominated (Pb) (Hg) (Cd) Chromium Biphenyls Diphenyl (CR(VI)) (PBB) Ethers (PBDE) Housing X O O O O X Display X O O O O X Printed Circuit X O O O O X X O O O O O X O O O O X Fan Assembly X O O O O X Power Supply X O O O O X O O O O O O Board Metal Fasteners Cable Assembly Assemblies Battery O: This tox
~~PAGE 163~~
KINO-PV-D5252/D4252 Mini ITX SBC 此附件旨在确保本产品符合中国 RoHS 标准。以下表格标示此产品中某有毒物质的含量符合中国 RoHS 标准规定的限量要求。本产品上会附有”环境友好使用期限”的标签，此期限是估算这些物质”不会有泄漏或突变”的年限。本产品可能包含有较短的环境友好使用期限的可替换元件，像是电池或灯管，这些元件将会单独标示出来。部件名称有毒有害物质或元素铅汞镉六价铬多溴联苯多溴二苯 (Pb) (HG) (Cd) (CR(VI)) (PBB) 醚 (PBDE) 壳体 XXXX O O O O XXXX 显示 X O O O O X 印刷电路板 X O O O O X 金属螺帽 X O O O O O 电缆组装 X O O O O X 风扇组装 X O O O O X 电力供应组装 X O O O O X 电池 O O O O O O O: 表示该有毒有害物质在该部件所有物质材料中的含量均在 SJ/T1136