Owner manual

KINO-HM551
Page 52
Figure 4-9: LVDS Voltage Selection Jumper Locations
4.5.5 LVDS Screen Resolution Selection
Jumper Label: J_PID1
Jumper Type:
8-pin header
Jumper Settings:
See Table 4-6
Jumper Loc
ation:
See Figure 4-10
The LV
DS Screen Resolution Selection jumper allows the LVDS screen voltage to be set.
The LVDS Screen Resolution Selection jumper settings are shown in Table 4-2.
Setting Description
Open 800 X 600 (18bit)
Short 1-2 1024 X 768 (18bit)
Short 3-4 1024 X 768 (24bit) Default
Short 1-2, 3-4 1280 X 800 (18bit)
Short 5-6 1280 X 1024 (48bit)
Short 1-2, 5-6 1366 X 768 (18bit)
Short 3-4, 5-6 1400 X 1050 (48bit)
Short 1-2, 2-4, 5-6 1440X 900 (48bit)
Short 7-8 1600 X 900 (48bit)
Short 1-2, 7-8 1600 X 1200 (48bit)
Short 3-4, 7-8 1680X 1050 (48bit)
Short 1-2, 3-4, 7-8 1920 X 1080 (48bit)
Short 5-6, 7-8 1920 X 1200 (48bit)
Short 1-2, 5-6, 7-8 2048 X 1536 (48bit)
Table 4-6: LVDS Screen Resolution Jumper Settings