Owner manual

KINO-GM45A Mini-ITX SBC
Page 54
Setting Description
Short 1-2 RS-232
Short 3-4 RS-422
Short 5-6 RS-485
Short 5-6, 7-8 RS-485 with RTS control
Table 4-4: COM 2 Function Select Jumper Settings
Figure 4-8: COM 2 Function Select Jumper Location
4.5.4 LVDS Panel Resolution Jumper
Jumper Label:
JP1
Jumper Type:
8-pin header (2x4)
Jumper Settings:
See
Table 4-5
Jumper Location:
See
Figure 4-9
The LVDS Panel Resolution jumper allows the resolution of the LVDS screens connected
to the LVDS1 connector to be configured. The LVDS Panel Resolution jumper settings are
shown in
Table 4-5.