Manual

KINO-G410 Mini-ITX Motherboard
Page 79
RTC Alarm Date (Days)
System Time
After setting the alarm, the computer turns itself on
from a suspend state when the alarm goes off.
5.3.6 Remote Access Configuration
Use the Remote Access Configuration menu (BIOS Menu 11) to configure remote
access parameters. The Remote Access Configuration is an AMIBIOS feature and
allows a remote host running a terminal program to display and configure the BIOS
settings.
BIOS SETUP UTILITY
Advanced
Configure Remote Access type and parameters

Remote Access [Enabled]
Serial port number [COM1]
Base Address, IRQ [3F8H, 4]
Serial Port Mode [115200 8,n,1]
Redirection After BIOS POST [Always]
Terminal Type [ANSI]
Select Remote Access
type.
 Select Screen
↑ ↓ Select Item
+ - Change Option
F1 General Help
F10 Save and Exit
ESC Exit
v02.61 ©Copyright 1985-2006, American Megatrends, Inc.
BIOS Menu 11: Remote Access Configuration
 Remote Access [Dis abled]
Use the Remote Access option to enable or disable access to the remote functionalities
of the system.

Disabled D
EFAULT
Remote access is disabled.

Enabled
Remote access configuration options shown below
appear:
Serial port number