User guide

KINO-G410 Mini-ITX Motherboard
Page 71
 Serial Port6 IRQ [IRQ10]
Use the Serial Port6 IRQ option to select the Serial Port 6 interrupt address.

IRQ10 DEFAULT
IRQ10 is assigned as the Serial Port 6 interrupt address

IRQ11
IRQ11 is assigned as the Serial Port 6 interrupt address
 Parallel Port Address [378]
Use the Parallel Port Address option to select the parallel port base address.

Disabled
No base address is assigned to the Parallel Port

378 DEFAULT
Parallel Port I/O port address is 378

278
Parallel Port I/O port address is 278

3BC
Parallel Port I/O port address is 3BC
 Parallel Port Mode [Normal]
Use the Parallel Port Mode option to select the mode the parallel port operates in.

Normal DEFAULT
The normal parallel port mode is the standard mode
for parallel port operation.

Bi-directional
Parallel port outputs are 8-bits long. Inputs are
accomplished by reading 4 of the 8 bits on the
status register.

EPP
The parallel port operates in the enhanced parallel
port mode (EPP). The EPP mode supports
bi-directional communication between the system
and the parallel port device and the transmission
rates between the two are much faster than the
Normal mode.