User guide

KINO-G410 Mini-ITX Motherboard
Page 48
Figure 4-11: SATA Power Drive Connection
4.5.2 USB Cable (Dual Port) with Slot Bracket
The KINO-G410 is shipped with a dual port USB 2.0 cable. To connect the USB cable
connector, please follow the steps below.
Step 1: Locate the connectors. The locations of the USB connectors are shown in
Chapter 3.
WARNING:
If the USB pins are not properly aligned, the USB device can burn out.
Step 2: Align the connectors. The cable has two connectors. Correctly align pin 1on
each cable connector with pin 1 on the KINO-G410 USB connector.