Owner manual

KINO-DH810
Page 39
CN Type:
RJ-45 , USB 3.0 and USB 2.0 ports
CN Location:
See Figure 3-25
CN Pinouts:
See Figure 3-27, Table 3-21 and Table 3-22
The LAN connector connects to a local network.
Figure 3-27: LAN Connector
The USB 2.0 ports are for attaching USB 2.0 peripheral devices to the system. The
pinouts of LAN2 and USB 2.0 connectors are shown below.
PIN NO. DESCRIPTION PIN NO. DESCRIPTION
P1 +1.5V_LAN2 P2 LAN2_MDIP0
P3 LAN2_MDIN0 P4 LAN2_MDIP1
P5 LAN2_MDIN1 P6 LAN2_MDIP2
P7 LAN2_MDN2 P8 LAN2_MDIP3
P9 LAN2_MDIN3 P10 GND
P11 LAN2_LINK100 P12 LAN2_LINK1000
P13 LAN2_ACT-1 P14 +V3.3A_LAN2
U1 +USB_PWR1 U2 USB20_C_N10
U3 USB20_C_P10 U4 GND
U5 +USB_PWR1 U6 USB20_C_N11
U7 USB20_C_P11 U8 GND
Table 3-21: LAN2_USB1 Connector Pinouts
The USB 3.0 ports are for attaching USB 3.0 peripheral devices to the system. To be able
to use the USB 3.0 ports, please make sure the USB 3.0 driver is installed. The pinouts of
LAN1 and USB 3.0 connectors are shown below.