Owner manual

KINO-DH810
Page 95
 Bootup NumLock State [On]
Use the Bootup NumLock State BIOS option to specify if the number lock setting must
be modified during boot up.

On DEFAULT
Allows the Number Lock on the keyboard to be
enabled automatically when the computer system
boots up. This allows the immediate use of the
10-key numeric keypad located on the right side of
the keyboard. To confirm this, the Number Lock LED
light on the keyboard is lit.

Off
Does not enable the keyboard Number Lock
automatically. To use the 10-keys on the keyboard,
press the Number Lock key located on the upper
left-hand corner of the 10-key pad. The Number
Lock LED on the keyboard lights
up when the
Number Lock is engaged.
 Quiet Boot [Enabled]
Use the Quiet Boot BIOS option to select the screen display when the system boots.

Disabled
Normal POST messages displayed

Enabled DEFAULT
OEM Logo displayed instead of POST messages
 UEFI Bo o t [Dis abled]
Use the UEFI Boot option to enable or disable to boot from the UEFI devices.

Enabled
Boot from UEFI devices is enabled.

Disabled DEFAULT
Boot from UEFI devices is disabled.
 Launch PXE OpROM [Dis abled]
Use the Launch PXE OpROM option to enable or disable boot option for legacy network
devices.