Instruction Manual

KINO-CVR-D25502/N26002
Page 67

Disabled
Legacy USB support disabled

Auto
Legacy USB support auto
 Generic STORAGE DEVICE 0207 [Auto]
Use the Generic STORAGE DEVICE 0207 BIOS option to specify the type of emulation
BIOS has to provide for the USB device.

Auto DEFAULT
BIOS auto-detects the current USB.

Floppy
The USB device will be emulated as a floppy drive.
The device can be either A: or B: responding to
INT13h calls that return DL = 0 or DL = 1
respectively.

Forced FDD
Allows a hard disk image to be connected as a
flopp
y image. This option works only for drives
formatted with FAT12, FAT16 or FAT32.

Hard Disk
Allows the USB device to be emulated as hard disk
responding to INT13h calls that return DL values of
80h or above.

CD-ROM
Assumes the CD-ROM is formatted as bootable
media. All the devices that support block sizes
greater than 512 bytes can only be booted using this
option.