Instruction Manual

KINO-CVR-D25502/N26002
Page 53
Figure 4-9: USB Connector
4.6.6 VGA Monitor Connection
The KINO-CVR-D25502/N26002 has a single female DB-15 connector on the external
peripheral interface panel. The DB-15 connector is connected to a CRT or VGA monitor.
To connect a monitor to the KINO-CVR-D25502/N26002, please follow the instructions
below.
Step 1: Locate the female DB-15 connector. The location of the female DB-15
connector is shown in Chapter 3.
Step 2: Align the VGA connector. Align the male DB-15 connector on the VGA screen
cable with the female DB-15 connector on the external peripheral interface.
Step 3: Insert the VGA connector. Once the connectors are properly aligned with the
insert the male connector from the VGA screen into the female connector on the
KINO-CVR-D25502/N26002. See Figure 4-10.