User guide

KINO-CV-D25501/N26001 SBC
Page 66
Figure 4-16: USB Connector
4.8.6 VGA Monitor Connection
The KINO-CV-D25501/N26001 has a single female D-sub 15 connector on the external
peripheral interface panel. The D-sub 15 connector is connected to a CRT or VGA monitor.
To connect a monitor to the KINO-CV-D25501/N26001, please follow the instructions
below.
Step 1: Locate the female D-sub 15 connector. The location of the female D-sub 15
connector is shown in Chapter 3.
Step 2: Align the VGA connector. Align the male D-sub 15 connector on the VGA
screen cable with the female D-sub 15 connector on the external peripheral
interface.
Step 3: Insert the VGA connector. Once the connectors are properly aligned with the
insert the male connector from the VGA screen into the female connector on the
KINO-CV-D25501/N26001. See
Figure 4-17.