User guide

KINO-CV-D25501/N26001 SBC
Page 54
Jumper Location:
See
Figure 4-5
The JP4 jumper selects the voltage of the LVDS1 connector.
Pin Description
Short 1-2 +3.3 V (Default)
Short 2-3 +5 V
Table 4-4: LVDS1 Voltage Selection
Figure 4-5: LVDS1 Voltage Selection Jumper Location
4.5.4 LVDS2 Voltage Selection
Jumper Label: JP1
Jumper Type:
3-pin header
Jumper Settings:
See
Table 4-4
Jumper Location:
See
Figure 4-5
The JP1 jumper selects the voltage of the LVDS2 connector.
Pin Description
Short 1-2 +3.3 V (Default)
Short 2-3 +5 V
Table 4-5: LVDS2 Voltage Selection