User guide

KINO-CV-D25501/N26001 SBC
Page 44
Figure 3-29: Serial Port Pinout Locations
3.3.6 VGA Connector
NOTE:
Due to Intel® GMA driver limitation, the monitor connected to the VGA
connector may not have signal to it after restarting from the graphics
driver installation. To solve this problem, press the Ctrl+Alt+F1 hotkey
to switch the screen to CRT mode.
CN Label: CRT1
CN Type:
D-sub 15-pin female connector
CN Location:
See
Figure 3-24
CN Pinouts:
See
Figure 3-30 an Table 3-29
The standard 15-pin female VGA connector connects to a CRT or LCD monitor.
Pin Description Pin Description Pin Description
1 RED 6 GROUND 11 NC
2 GREEN 7 GROUND 12 SDA
3 BLUE 8 GROUND 13 HSYNC
4 +5V 9 NC 14 VSYNC
5 GROUND 10 GROUND 15 SCL
Table 3-29: VGA Connector Pinouts