Manual

KINO-AQ870
Page 51
Figure 4-6: DIMM Installation
Step 1: Open the DIMM socket handles. Open the two handles outwards as far as they
can. See Figure 4-6.
Step 2: Align the DIMM with the socket. Align the DIMM so the notch on the memory
lines up with the notch on the memory socket. See Figure 4-6.
Step 3: Insert the DIMM. Once aligned, press down until the DIMM is properly seated.
Clip the two handles into place. See Figure 4-6.
Step 4: Remove a DIMM. To remove a DIMM, push both handles outwards. The
memory module is ejected by a mechanism in the socket.