User Manual

KINO-AQ670
Page 50
Jumper Type:
3-pin header
Jumper Settings:
See Table 4-4
Jumper Location:
See Figure 4-11
The Wake-on LAN (WOL) mode select jumper allows the user to enable or disable the
WOL function. WOL mode select jumper settings are shown in Table 4-2.
Setting Description
Short 1-2 WOL Mode Enable Default
Short 2-3 WOL Mode Disable
Table 4-4: WOL Mode Select Jumper Settings
The location of the WOL mode select jumper is shown in Figure 4-9 below.
Figure 4-11: WOL Mode Select Jumper Location
4.5 Internal Peripheral Device Connections
This section outlines the installation of peripheral devices to the on-board connectors