User Manual

KINO-AQ670
Page 44
Figure 4-4: Close the Socket LGA1155
Step 9: Connect the 12 V power to the board. Connect the 12 V power from the power
supply to the board.
4.3.2 Cooling Kit Ins tallation
WARNING:
DO NOT attempt to install a push-pin cooling fan.
The pre-installed support bracket prevents the board from bending and
is ONLY compatible with captive screw type cooling fans.
Figure 4-5: Cooling Kits (CF-1156A-RS, CF-1156B-RS)
The cooling kits can be bought from IEI. The cooling kit has a heat sink and fan.