Manual

KINO-9652 Mini-ITX SBC
Page 130
 Restore on AC Power Loss [Last State]
Use the Restore on AC Power Loss BIOS option to specify what state the system
returns to if there is a sudden loss of power to the system.

Power Off
The system remains turned off

Power On
The system turns on

Last State DEFAULT
The system returns to its previous state. If it was on, it
turns itself on. If it was off, it remains off.
 Resume on Ring [Disabled]
Use the Resume on Ring BIOS option to enable activity on the RI (ring in) modem line to
rouse the system from a suspend or standby state. That is, the system will be roused by
an incoming call on a modem.

Disabled DEFAULT
Wake event not generated by an incoming call

Enabled
Wake event generated by an incoming call
 Resume on PME# [Disabled]
Use the Resume on PME# BIOS option to enable activity on the PCI PME (power
management event) controller to rouse the system from a suspend or standby state.

Disabled DEFAULT
Wake event not generated by PCI PME controller
activity

Enabled
Wake event generated by PCI PME controller activity
 Resume On RTC Alarm [Disabled]
Use the Resume On RTC Alarm option to specify the time the system should be roused
from a suspended state.