Instruction Manual

KINO-945GSE2 Motherboard
Page 58
Sets the voltage supplied to the LCD panel through backlight inverter connector
INVERTER2.
Pin Description
1-2 +3.3 V
2-3 +5.0 V
Table 4-7: LVDS2 Voltage Selection Settings
The jumper location is shown below.
Figure 4-7: LVDS2 Voltage Selection Settings
4.5.7 LVDS1 Panel Resolution
Jumper Label: J_LCD_TYPE1
Jumper Type:
8-pin header
Jumper Settings:
See
Table 4-8
Jumper Location:
See
Figure 4-8
This jumper sets the screen resolution of the attached LCD panel.