Instruction Manual

KINO-945GSE2 Motherboard
Page 57
4.5.5 LVDS1 Voltage
Jumper Label: J_LVDS1
Jumper Type:
3-pin header
Jumper Settings:
See
Table 4-6
Jumper Location:
See
Figure 4-6
Sets the voltage supplied to the LCD panel through backlight inverter connector
INVERTER1.
Pin Description
1-2 +3.3 V
2-3 +5.0 V
Table 4-6: LVDS1 Voltage Selection Settings
The jumper location is shown below.
Figure 4-6: LVDS1 Voltage Selection Settings
4.5.6 LVDS2 Voltage
Jumper Label: J_LVDS2
Jumper Type:
3-pin header
Jumper Settings:
See
Table 4-6
Jumper Location:
See
Figure 4-6