Instruction Manual

KINO-945GSE2 Motherboard
Page 53
Jumper Settings:
See
Table 4-2
Jumper Location:
See
Figure 4-2
The AT/ATX Power Selection jumper specifies the systems power mode as AT or ATX.
Power Selection jumper settings are shown in
Table 4-2.
Pin Description
1-2 ATX power
2-3 AT power
Table 4-2: AT/ATX Power Selection Jumper Settings
The location of the AT/ATX Power Selection jumper are shown in Figure 4-2 below.
Figure 4-2: AT/ATX Power Selection Jumper Location
4.5.2 Clear CMOS Jumper
Jumper Label: J_CMOS1
Jumper Type:
3-pin header
Jumper Settings:
See
6Table 4-3
Jumper Location:
See
6Figure 4-3