Instruction Manual

KINO-945GSE2 Motherboard
Page 21
Figure 3-3: Audio Connector Location
Pin Description Pin Description
1 Line out right 2 Line in right
3 Audio ground 4 Audio ground
5 Line out left 6 Line in left
7 Audio ground 8 Audio ground
9 Microphone input 10 Microphone input
Table 3-4: Audio Connector Pinouts
3.2.3 Battery Connector
CN Label: BT1
CN Type:
2-pin wafer
CN Location:
See
Figure 3-4
CN Pinouts:
See
Table 3-5
The battery connector is connected to a backup battery. The battery connector is also
used to reset the CMOS memory if the incorrect BIOS settings have been made and the
system cannot boot up.