Instruction Manual

KINO-945GSE2 Motherboard
Page 103
 Port 64/60 Emulation [Disabled]
Use the Port 64/60 Emulation Mode BIOS option to enable or disable the “Port 60h/64h”
trapping option. Port 60h/64h trapping allows the BIOS to provide full PS/2 based legacy
support for the USB keyboard and mouse. This option is useful for Microsoft Windows NT
Operating System and for multi-language keyboards. Also this option provides the PS/2
functionalities like keyboard lock, password setting, scan code selection etc to USB
keyboards.

Disabled
Port 60h/64h trapping option enabled

Enabled DEFAULT
Port 60h/64h trapping option disabled
 USB2.0 Controller Mode [HiSpeed]
Use the USB2.0 Controller Mode option to set the speed of the USB2.0 controller.

FullSpeed
The controller is capable of operating at 12 Mb/s

HiSpeed DEFAULT
The controller is capable of operating at 480 Mb/s
 BIOS EHCI Handoff
Use the BIOS EHCI Handoff option for systems running OSes that do not have EHCI
hand-off support. The EHCI ownership change is managed by the EHCI driver.

Disabled
Systems with OSes that do not support EHCI can
use the EHCI handoff functionality.

Enabled DEFAULT
Systems with OSes that do not support EHCI cannot
use the EHCI handoff functionality.
 Hotplug USB FDD Support [Enabled]
Use the Hotplug USB FDD Support option to enable or disable USB FDD support.

Disabled
Hot-plug USB FDD support disabled.

Enabled DEFAULT
A virtual FDD drive is created and will be associated
with the hotplugged FDD later.